Noble House Home Furnishings Ottoman User manual

Label Picture Description QTY
A Seat 1
B Leg 4
Label Picture Description QTY
①Washer Ring 7
Caution :You must read this before you proceed
Ottoman
Before Beginning Assembly:
Noble House Home Furnishings LLC 1 of 4

Step 2
This Ottoman has multiple parts and may require up to some 30 minutes to
assemble. To give you an overview of the Ottoman parts, the above picture is to
help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before
assembly.
Step 1
Position the Ottoman upside down,as shown.
Unzip to open pouch and remove the 4 wooden legs and Hardware, close the
pouch.
Leg (B)
FRONT FACING
Seat (A)
①
Seat(A)
Seat(A)
Leg (B)
Noble House Home Furnishings LLC 2 of 4

Step 3
Step 1
Step 2
Connecting the two sofas by using the pre-fixed Connecting Pieces (⑥)on
Corner Sofa as shown in the picture.
If you already purchased 2 or more than 2 products, Please read on
Note: This is optional step in case we want to connect all sofas in a set together
and to match the environment of your home.
Install the Legs (B) to the Seat(A) by using the Washer Rings(①) as shown
Stand the Ottoman up.
Note: The use of Washer Rings(①) are OPTIONAL and are especially useful to
help alleviate slight wobbles. Some Legs may need more than one Washer
Ring(①) whilst some Legs may not need any.
Position arm sofa right side up and test for stability on a Level Surface.
Add or remove Washer Rings(①) where needed to achieve stability.
Your Ottoman is ready for use.
Your Ottoman can only be used on a flat, level surface.
Step2.1 Step2.2
Noble House Home Furnishings LLC 3 of 4

Noble House Home Furnishings LLC 4 of 4