Noble House Home Furnishings PLANTER User manual

Assembly Instructions
PLANTER
CAUTION: You must read this before you proceed
Please look in the First Frame for hardware packs
CAUTION: This Planter is NOT a TOY.
Keep your child/children at bay during the assembly process.
Whenever lifting the Planter and to prevent any possible damage to it, two adults are needed to execute this
action.
Noble House Home Furnishings LLC 1/7

Parts List:
No. Picture Description Qty
AFrist Frame 1
BSecond Frame 1
CLeg 2
DBox 6
E1 Right Patch 1
E2 Left Patch 1
FCorner 2
Hardware:
Table Hardware:
No. Picture Description Qty
① Nut
(M8 x 15mm) 5
②Srews M7 x 90 3
③Srews M6 x 40 5
④Srews M4 x 25 5
⑤Allen Wrench 1
⑥Screwdriver No provided
Noble House Home Furnishings LLC 2/7

Assembly Preparation:
Before Beginning Assembly:
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
Noble House Home Furnishings LLC 3/7

Assembly Steps:
OVERVIEW:
This Planter has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Planter parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Step1:
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC 4/7

Step 2:
Place the Frist Frame (A) and Second Frame(B) on surface as shown above.
Then position the Right Patch (E1) and the Left Patch (E2) to the Frist Frame (A) and Second Frame(B) using
Nuts (①) and Screw (④) with Allen Wrench (⑤) and Screwdriver (⑥) as shown in picture above.
Do not fully tighten the Screws.
Step 3:
With the help of your adult partner, turn the right side of the frame on step 2 up, then attach the Leg (C) to the
Second Frame(B) using Screws (②) and Allen Wrench(⑤) as shown in picture above.
Do not fully tighten the Bolts.
Noble House Home Furnishings LLC 5/7

Step 4:
With the assistance of your adult partner, stand the Planter up.
Place the Planter onto a flat, level surface.
Attach the Corner (F) with the Leg (C) and the second Frame (B) using
Screw (③) with Allen Wrench (⑤) as shown in picture above.
In a sequential manner, gradually tighten all Bolts and Screws at all joints until
evenly secured.
Step 5:
Attach the Box (D) to the Frist Frame (A) and Second Frame(B) as shown in
picture above.
Then EXERT pressure, floorwards onto the Planter with both hands.
This pressure will help the Planter reach full alignment at all joints.
Inspect the Planter and make sure all parts are adequately connected.
Your Planter is ready for use.
This Planter can only be used on a flat, level surface.
Noble House Home Furnishings LLC 6/7

Care & Maintenance
Noble House Home Furnishings LLC 7/7