Noble House Home Furnishings 4 DRAWER CHEST User manual

WARNING!!
Children have died from furniture tipover.
Tip restraints have been included with this product;
you must install the tip restraints according to these instructions in order to
minimize the risk of furniture tipping.
If you have any questions about this product or the tip restraint, please send us an
email at t[email protected]
NEVER allow children to climb or hang on furniture,
including drawers or cabinet doors.
In addition to installing the restrains，to help prevent tip-over
1. NEVER put a TV or other heavy objects on top of
this product.
2. Do not stand on the product
Noble house Home Furnishings LLC Page 1 OF 26

Label Picture Description QTY
Left Front Leg 1
Right Front Leg 1
Right Rear Leg 1
Left Rear Leg 1
Assembly Instructions
Caution : You must read this before you proceed
Part List
4 DRAWER CHEST
1
2
3
4
Noble house Home Furnishings LLC Page 2 OF 26

Left Side Panel 1
Right Side Panel 1
Horizontal Panel 2
Bottom Front Panel 1
Bottom Rear Panel 1
Top Panel 1
Back Panel 1
Drawer Front 1
5
6
7
8
9
10
11
12
Noble house Home Furnishings LLC Page 3 OF 26

Drawer Front 3
Left Drawer Side Panel 1
Right Drawer Side Panel 1
Drawer Back Panel 1
Drawer Panel 4
Left Drawer Side Panel 3
Right Drawer Side Panel 3
13
14
15
16
17
18
19
Noble house Home Furnishings LLC Page 4 OF 26

Drawer Back Panel 3
Drawer Support Panel 4
Back Support 1
Drawer Divider 2
21
22
23
20
Noble house Home Furnishings LLC Page 5 OF 26

Label Picture Description QTY
A
Wood Dowel
M6 x 25mm
29
B
Wood Dowel
M8 x 25mm
13
CCam Bolt 49
D
Cam Lock
(15/12.5mm)
29
E
Cam Lock
(15/9.5mm)
21
FScrew M4.5 x 38mm 25
GScrew M4 x 25mm 5
HScrew M4 x 12mm 17
ISlide 4
JScrew M4 x 14mm 33
KL-Bracket 5
L
Truss Head Screw
M4 x 12mm
19
MHandle 9
Hardware
Carcass Slide Drawer Slide
Noble house Home Furnishings LLC Page 6 OF 26

NGlue 2
OCorner Block 5
P
Screw M3 x 20mm 5
Q
Screwdriver
(not provided)
1
RHammer
(not provided) 1
S
Power Drill
(not provided)
1
Screw M3.5 x 12mm 2
Screw M3.5 x 38mm 2
Wall Plug 2
Metal Bracket 2
T
Restraint Device Hardware
Noble house Home Furnishings LLC Page 7 OF 26

Before
Beginning
Assembly:
Assembly Preparation
X 2
X 5
X 5
X 2
X 33
X 5
X 19
X 9
X 13
X 49
X 29
X 21
X 25
X 5
X 4
X 29
X 17
x3
⑳
⑪
⑩
⑨
⑧
⑦
⑥
⑤
④
③
②
①
⑲
⑱
⑰
⑯
⑮
⑭
⑬
⑫
㉒
㉑
⑦
⑰
㉑
㉓
㉓
Noble house Home Furnishings LLC Page 8 OF 26

This 4 Drawer Chest has multiple parts and may require up to 60 minutes to assemble.
To give you an overview of the 4 Drawer Chest parts, the above picture is to help you put
the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps
before assembly.
Overview
Assembly Steps
Top
Panel (10)
FRONT FACING
Side
Panel Left (5)
Drawer
Front (12)
Drawer
Front (13)
Left Rear
Leg (4)
Horizontal
Panel (7)
Right Front
Leg (2)
Left Front
Leg (1)
Side
Panel Right (6)
Noble house Home Furnishings LLC Page 9 OF 26

Step 1
Step 2
Unpack and place all parts on a clean, non-marring surface.
1.1) Apply Glue (N), and insert Wood Dowels M8x25mm (B) into Left Side Panel ⑤,
Right Side Panel ⑥, Bottom Front Panel ⑧and Bottom Rear Panel ⑨using a hammer
(R).
Note: There are pre-existing mounting positions on the Panels to insert the
Wood Dowels (B).
2.1) Apply Glue (N), and insert Wood Dowels M6x25mm (A) into Left Side Panel ⑤,
Right Side Panel ⑥, Left Drawer Side Panel ⑭, Right Drawer Side Panel ⑮,
Left Drawer Side Panel ⑱, Right Drawer Side Panel ⑲, Drawer Support Panel ㉑, and
Drawer Divider ㉓using the hammer (R).
Note: There are pre-existing mounting positions on the Panels to insert the
Wood Dowels (A).
B
8
5x2
A5x2 18 19 2322 25 26 (x2)(x2) (x4)(x4)(x2) (x6)
A
26
(x2)
(x2) B
8
5x2
7
N
A
26
(x2) B
8
5x2
7
11
A
B
A
N
x 4
x 2
R
R
⑨
⑧
⑥
⑤
⑥
⑤
⑲
⑱
⑮
⑭
㉑
㉓
x 3
x 3
Noble house Home Furnishings LLC Page 10 OF 26

Step 3
3.1) Insert Cam Bolts (C) into the mounting positions on Left Front Leg ①,
Right Front Leg ②, Right Rear Leg ③, Left Rear Leg ④, Left Side Panel ⑤,
Right Side Panel ⑥, Top Panel ⑩, Drawer Front ⑫, and Drawer Front ⑬using
screwdriver (Q).
Note: There are pre-existing mounting positions on the Panels to insert the
Cam Bolts (C).
13 X 3
C
Q
⑩
⑥
⑤
④
③
②
①
⑬
⑫
x 3
Noble house Home Furnishings LLC Page 11 OF 26

Step 5
Step 4
4.1) Insert Cam Locks (D) into the mounting positions on Left Front Leg ①,
Right Front Leg ②, Right Rear Leg ③, Left Rear Leg ④, Left Side Panel ⑤,
Right Side Panel ⑥, Bottom Front Panel ⑧and Bottom Rear Panel ⑨.
CAUTION: Insert the Cam Locks (D) per the correct orientation as indicated in the
above picture.
Note: There are pre-existing mounting positions on the Panels to insert the
Cam Locks (D).
5.1) Insert Cam Locks (E) into the mounting positions on Left Drawer Side Panel ⑭,
Right Drawer Side Panel ⑮, Left Drawer Side Panel ⑱,
Right Drawer Side Panel ⑲, and Drawer Support Panel ㉑.
CAUTION: Insert Cam Locks (E) per the correct orientation as indicated in the above
picture.
Note: There are pre-existing mounting positions on the Panels to insert the
Cam Locks (E).
CAUTION
D
CAUTION
X3
X3
X4
E
⑨
⑧
⑥
⑤
④
③
②
①
⑲
⑱
⑮
⑭
㉑
Noble house Home Furnishings LLC Page 12 OF 26

7.1) Insert Drawer Panel ⑰along the grooves on Drawer Front ⑫,
Left Drawer Side Panel ⑭and Right Drawer Side Panel ⑮.
7.2) Insert Drawer Panel ⑰along the grooves on Drawer Front ⑬,
Left Drawer Side Panel ⑱and Right Drawer Side Panel ⑲.
Tips: To ensure the Drawer Panels ⑰are in the correct position: Insert the panels
with the warning label facing down.
6.1) Apply Glue (N) into the dowel mounting positions on Drawer Front ⑫and
Drawer Front ⑬.
Attach Left Drawer Side Panel ⑭, Right Drawer Side Panel ⑮,
Drawer Support Panel ㉑, and Drawer Divider ㉓to Drawer Front ⑫and attach
Left Drawer Side Panel ⑱, Right Drawer Side Panel ⑲and
Drawer Support Panel ㉑to Drawer Front ⑬.
6.2) Turn the Cam Locks (E) clockwise with screwdriver (Q) until they all lock into place.
Step 6
Step 7
7.1
7.2
x3
6.2
N
6.1
x3
Q
Warning Label
⑲
⑱
⑮
⑭
⑬
⑫
㉓
㉑
㉓
㉑
⑲
⑱
⑰
⑮
⑭
⑬
⑫
⑰
Noble house Home Furnishings LLC Page 13 OF 26

8.1) Apply Glue (N) into the dowel mounting positions on Drawer Back Panel ⑯.
Attach the Drawer Back Panel ⑯using Screws M4.5 x 38mm (F) and screwdriver (Q).
8.2) Attach Drawer Back Panel ⑳using Screws M4.5 x 38mm (F) and screwdriver (Q).
Note: There are pre-existing mounting positions on the Panels for the screws
M4.5 x 38mm (F).
Step 8
9.1) Attach Handles (M) to Drawer Front ⑫using Truss Head Screws M4 x 12mm (L)
and Screwdriver (Q).
9.2) Attach Handles (M) to Drawer Front ⑬using Truss Head Screw M4 x 12mm (L)
and Screwdriver (Q).
Tighten the Screws fully in a sequential manner.
Note: There are pre-existing mounting positions on the Panels to attach the
Handles (M).
Step 9
9.2
9.1
x3
L
M
8.1
8.2
N
F
F
F
F
Q
F
F
x3
Q
⑳
⑲
⑱
⑯
⑮
⑭
㉑
㉑
⑬
⑫
Noble house Home Furnishings LLC Page 14 OF 26

10.1) Attach the Slide Left (I) onto Left Drawer Side Panel ⑭and
Slide Right (I) onto Right Drawer Side Panel ⑮using
Screws M4 x 12mm (H) and screwdriver (Q).
Repeat the same steps to attach Slides onto Left Drawer Side Panel ⑱and
Right Drawer Side Panel ⑲.
Note: There are pre-existing mounting positions on the Panels to attach the
Slide (I).
Step 10
x3
x3
I
H
Q
⑲
⑱
⑮
⑭
FRONT
H
Q
I
Noble house Home Furnishings LLC Page 15 OF 26

11.1) Apply Glue (N) into the dowel mounting positions on Left Rear Leg ④.
Attach Left Side Panel ⑤to Left Rear Leg ④.
Turn the Cam Locks clockwise with screwdriver (Q) until they all lock into place.
11.2) Apply Glue (N) into the dowel mounting positions on Left Front Leg ①.
Attach Left Front Leg ①to Left Side Panel ⑤.
Turn the Cam Locks (D) clockwise with screwdriver (Q) until they all lock into place.
Step 11
N
11.1
Q
11.2
N
Q
⑤
④
①
⑤
Noble house Home Furnishings LLC Page 16 OF 26

13.1) Attach Horizontal Panel ⑦to Left Side Panel ⑤using Screws M4 x 25mm (G) and
screwdriver (Q).
Repeat the same steps to Assemble Horizontal Panel ⑦to Right Side Panel ⑥.
Note: There are pre-existing mounting positions on the Panels for the screws
M4 x 25mm (G).
12.1) Apply Glue (N) into the dowel mounting positions on Right Rear Leg ③.
Attach Right Side Panel ⑥to Right Rear Leg ③.
Turn the Cam Locks clockwise with screwdriver (Q) until they all lock into place.
12.2) Apply Glue (N) into the dowel mounting positions on Right Front Leg ②.
Attach Right Front Leg ②to Right Side Panel ⑥.
Turn the Cam Locks (D) clockwise with screwdriver (Q) until they all lock into place.
Step 13
Step 12
N
G
12.2
G
G
G
Q
Q
12.1
N
Q
⑥
③
②
⑥
⑦
⑥
⑤
⑦
Noble house Home Furnishings LLC Page 17 OF 26

Step 14
15.1) Apply Glue (N) into the dowel mounting positions on Right Side Panel ⑥.
Attach Bottom Front Panel ⑧and Bottom Rear Panel ⑨to Right Side Panel ⑥.
15.2) Turn the Cam Locks (D) clockwise with screwdriver (Q) until they all lock into place.
14.1) Attach the Slide Left (I) to Left Side Panel ⑤and the Slide Right (I) to
Right Side Panel ⑥using Screws M4 x 14mm (J) and screwdriver (Q).
Tighten the Screws fully in a sequential manner.
Note: There are pre-existing mounting positions on the Panels to attach the
Slides (I).
Step 15
N
J
Edging
15.2
15.1
I
Edging
FRONT
FRONT
FRONT
Q
Q
⑥
⑤
②
①
⑨
⑧
⑥
Noble house Home Furnishings LLC Page 18 OF 26

16.1) Apply Glue (N) into the dowel mounting positions on Left Side Panel ⑤.
16.2) Attach Bottom Front Panel ⑧and Bottom Rear Panel ⑨to Left Side Panel ⑤.
Turn the Cam Locks (D) clockwise with screwdriver (Q) until they all lock into place.
17.1) Assemble the L-Brackets (K) to Back Support ㉒using Screws M4 x 14mm (J) and
Screwdriver (Q).Then, assemble Back Support ㉒to Left Side Panel ⑤and
Right Side Panel ⑥using screws M4 x 14mm (J) with Screwdriver (Q).
Note: There are pre-existing mounting positions on the Panels to attach the
L-Brackets (K).
Step 17
Step 16
N
16.2
16.1
K
J
Q
Q
⑨
⑧
⑤
⑥
⑤
㉒
㉒
J
Noble house Home Furnishings LLC Page 19 OF 26

Insert Back Panel ⑪along the grooves on Left Side Panel ⑤, Right Side Panel ⑥and
Bottom Rear Panel ⑨.
19.1) Apply Glue (N) into the dowel mounting positions on Top Panel ⑩.
19.2) Attach Top Panel ⑩to Left Front Leg ①, Right Front Leg ②,
Right Rear Leg ③, Left Rear Leg ④, Left Side Panel ⑤and Right Side Panel ⑥.
Turn the Cam Locks (D) clockwise with screwdriver (Q) until they all lock into place.
Step 18
Step 19
19.1
19.2
Detail A
Detail A
N
Detail A
Q
Anti-tipping pre-holes
on the Top Panel 10
⑥
⑤
⑪
⑨
⑥
⑤
⑩
④
③
②
①
Noble house Home Furnishings LLC Page 20 OF 26