Noble House Home Furnishings Chair User manual

Label Picture Description QTY
A Seat 1
B Chair Legs 4
C Support Ring 1
D Seat Cushion 1
Label Picture Description QTY
①Bolt
(M6X20mm) 9
②Washer 9
③Spring Washer 9
④Nut(M6) 5
⑤Allen Wrench(M6) 1
⑥Wrench(M6) 1
⑦Leveller 5
Assembly Instructions
Caution: You must read this before you proceed
Chair
Part List
Hardware
Noble House Home Furnishings LLC Page 1 OF 4

Assembly Preparation
Assembly Steps
Overview
This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Chair parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Before Beginning
Assembly:
Seat (A)
Chair Legs (B)
Seat Cushion (D)
Support (C)
Noble House Home Furnishings LLC Page 2 OF 4

Step 2
Step 5
Install the Leveller(⑦) into the bottom of the Chair Leg(B), tighten by turning the Leveller
clockwise.
Repeat the same step to install the three remaining Levellers.
Place the Seat(A) facedown onto a clean, non-marring surface.
Align the Chair Leg(B) to the Seat(A) as shown above.
Attach the Chair Leg(B) to the Seat(A) using Bolts(①), Spring Washers(③) and Washers(②) with
the Allen Wrench(⑤).
Do not fully tighten the Bolts.
Step 3
Repeat Step 2 to assemble the remaining legs using Bolts(①), Spring Washers(③) and
Washers(②) with the Allen Wrench(⑤).
Do not fully tighten the Bolts.
Step 4
Align the Support(C) to the Chair Legs(B) as shown above.
Attach the Support(C) to the Chair Legs(B) using Nuts(④) with the Wrench(⑥).
Tighten all the Nuts and Bolts.
⑤
①
③
②
⑤
①
③
②
⑥
B
A
B
A
A
B
B
B
B
B
A
A
B
B
B
B
C
C
B
⑦
A
B
B
B
B
C
Noble House Home Furnishings LLC Page 3 OF 4

●
●
●
●
●
●
●
●
●
●
●
Step 7
Put the Seat Cushion(D) onto the Chair.
Secure the Seat Cushion using the straps as pictured.
Your Chair is ready for use.
This Chair can only be used on a flat and level surface.
Step 6
Stand the Chair up.
Place the Chair on a LEVEL SURFACE to check for wobbles.
Adjust the Levelers to ensure chair stability.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the
surface.
Care & Maintenance
To obtain the longest lifespan of your outdoor products, avoid
extended and lengthy exposure to rain, snow, and direct sunshine.
Whenever possible cover the product and /or place under patio or
awnings.
Not for commercial use. For residential use only.
Stains may be removed with mild soap solution and damp cloth.
Keep away from sources of ignition.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.
Prolonged exposure to rain may cause rusting which can stain
floors.
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
To obtain the longest lifespan of your outdoor products, minimizing
exposure to direct sunlight is recommended.
D
Noble House Home Furnishings LLC Page 4 OF 4