Noble House Home Furnishings Table User manual

NO. Picture QTY
A 1
B 4
NO. Picture QTY
①9
②9
③9
④1
Assembly instructions
Description
Leg with pre-attached Leveller
Hard ware
Bolts(M8*30mm)
Spring Washers(8mm)
Washers(8mm)
Wrench
Caution: You must read this before you proceed
Table
CAUTION: This table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Parts list
Description
Table Top
Noble House Home Furnishings LLC
1 OF 4

Assembly Preparation
Before Beginning Assembly:
Assembly Step
This Table has multiple parts and may require up to some 30 minutes to
assemble.
To give you an overview of the parts, the above picture is to help you put
the various parts into perspective.
Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Overview
Table Top(A)
FRONT FACING
Leg with pre-
attached
Leveller(B)
X 9
X 9
X 9
Noble House Home Furnishings LLC
2 OF 4

Unpack and place all parts onto a clean soft surface.
Turn the Table Top(A) upside down on o a soft surface to avoid scratching.
Attach Leg with Pre-attached Leveller(B) to the mounting position on the
Table Top(A) with Bolts(①), Spring Washers(②) and Washers(③) by
Wrench(④).
Do not over tighten.
Turn the Table rightside up.
Adjust the pre-installed Leveller until the table is level with the ground.
Then, proceed to tighten all Bolts.
Your table is ready for use.
Caution: This table can only be used on a flat, level surface.
Adjust height
for balance
Adjust low for
balance
①
②
④
③
Noble House Home Furnishings LLC
3 OF 4

Noble House Home Furnishings LLC
4 OF 4