Noblelift PT20H manual 

Version 10/2021
PT 20/25/30H-SMS-001-EN
INSTRUCTION HANDBOOK
Electric Pallet Truck
PT 20/25/30H PT 20H PLUS
WARNING
Do not use the pallet truck before reading and
understanding these operating instructions.
NOTE:
•Please check the designation of your
present type at the last page of this
document as well as on the ID-plate.
•Keep for future reference.
•

1

2
FOREWORD
Before operating the truck, read this ORIGINAL INSTRUCTION HANDBOOK carefully and understand
the usage of the truck completely. Improper operation could create danger.
This handbook describes the usage of different electric pallet trucks. When operating and servicing the
truck, make sure, that it applies to your type.
Keep this handbook for future reference. If this or the warning/ caution labels are damaged or got lost,
please contact your local dealer for replacement.
This truck complies with the requirements according to EN ISO 3691-1(Industrial trucks- safety
requirements and verification, part 1; part 5), EN 12895 (Industrial trucks- electromagnetic compatibility),
EN 12053 (Safety of industrial trucks- test methods for measuring noise emissions), EN 1175-1
(Industrial truck safety –electrical requirements), assumed the truck is used according to the described
purpose.
The noise level for this machine is 69 dB(A) according to EN 12053.
The vibration is 0.88 m/s2 according to EN 13059.
ATTENTION:
•Environmentally hazardous waste, such as batteries, oil and electronics, will have a negative effect
on the environment, or health, if handled incorrectly.
•The waste packages should be sorted and put into solid dustbins according to the materials and be
collected disposal by local special environment protection bureau. To avoid pollution, it’s forbidden to
throw away the wastes randomly.
•To avoid leaking during the use of the products, the user should prepare some absorbable materials
(scraps of wooden or dry duster cloth) to absorb the leaking oil in time. To avoid second pollution to
the environment, the used absorbable materials should be handed in to special departments in
terms of local authorities.
•Our products are subject to ongoing developments. Because this handbook is only for the purpose of
operating /servicing the pallet truck, therefore please have understanding, that there is no guarantee
out of particular features out of this handbook.
NOTE: On this manual, the left sign means warning and danger, which can lead
to death or serious injury if not followed.
Copyright
The copyright remains with the company, mentioned on the CE- certificate at the end of this document or,
if sold within the USA, with the company, mentioned on the company sticker.

3
TABLE OF CONTENTS
1. CORRECTAPPLICATION ................................................................................................................. 5
2. DESCRIPTION OF THE PALLET TRUCK......................................................................................... 6
a. Overview of the main components................................................................................................. 6
b. Main technical data......................................................................................................................... 7
c. Description of the safety devices and warning labels .................................................................. 12
d. Identification plate......................................................................................................................... 13
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS .................................................... 10
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING ........................................................11
a. Commissioning ..............................................................................................................................11
b. Lifting/ transportation .....................................................................................................................11
c. Decommissioning.......................................................................................................................... 12
5. DAILY INSPECTION......................................................................................................................... 13
6. OPERATING INSTRUCTIONS ........................................................................................................ 13
a. Parking........................................................................................................................................ 13
b. Lifting............................................................................................................................................. 14
c. Lowering...................................................................................................................................... 14
d. Travelling....................................................................................................................................... 14
e. Steering......................................................................................................................................... 15
f. Braking........................................................................................................................................ 16
g. Malfunctions.................................................................................................................................. 16
h. Emergency.................................................................................................................................... 16
7. BATTERY CHARGINGAND REPLACEMENT................................................................................ 17
a. Replacement............................................................................................................................... 17
b. Battery indicator............................................................................................................................ 18
c. Charging.............................................................................. Ошибка! Закладка не определена.
8. REGULAR MAINTENANCE............................................................................................................. 20
a. Maintenance checklist................................................................................................................... 20
b. Lubricating points........................................................................................................................ 21
c. Check and refill hydraulic oil......................................................................................................... 22
d. Checking electrical fuses.............................................................................................................. 22
9. TROUBLE SHOOTING .................................................................................................................... 23
10. WIRING/ CIRCUIT DIAGRAM.......................................................................................................... 24
a. PT20H Curtis electrical circuit diagram ........................................................................................ 24
b. PT20H QT electrical circuit diagram............................................................................................. 26
c. PT20H PLUS Curtis electrical circuit diagram.............................................................................. 28
d. PT20H PLUS QT electrical circuit diagram .................................................................................. 30
e. PT25/30H Curtis electrical circuit diagram ................................................................................... 32
f. PT25/30H QT electrical circuit diagram........................................................................................ 34

4
g. Hydraulic circuit............................................................................................................................. 36
11.DECLARATION OF CONFORMITY (valid, if sold within the EU)....................................................... 37

5
1. CORRECT APPLICATION
It is only allowed to use this electric pallet truck according to this instruction handbook.
The trucks described in this handbook are self propelled electric power pallet trucks, with electrically
powered low height lifting function. The trucks are designed to lift, lower and transport palletized loads.
A wrong usage can cause human injuries or can damage equipment.
The operator/ the operating company has to ensure the correct usage and has to ensure, that this pallet
truck is used only by staff, which is trained and authorized to use this truck.
The pallet truck has to be used on substantially firm, smooth, prepared, level and adequate surfaces.
The truck is intended to be used for indoor applications with ambient temperatures between +5C and +
40C and for various of transporting applications without crossing permanent obstacles or potholes.
Operating on ramps is not allowed. While operating, the load must be placed approximately on the
longitudinal centre plane of the truck.
Lifting or transporting people is forbidden.
If used on tail lifts or loading ramps, please ensure that these are used correctly according to the
operating instructions.
The capacity is marked on capacity sticker as well on the Identification plate. The operator has to
consider the warnings and safety instructions.
Operating lighting must be minimum 50 Lux.
Modification
No modifications or alterations to this pallet truck which may affect, for example, capacity, stability or
safety requirements of the truck, shall be made without the prior written approval of the original truck
manufacturer, its authorized representative, or a successor thereof. This includes changes affecting, for
example braking, steering, visibility and the addition of removable attachments. When the manufacturer
or its successor approve a modification or alteration, they shall also make and approve appropriate
changes to capacity plate, decals, tags and operation and maintenance handbooks.
By not observing these instructions, the warranty becomes void.

6
2. DESCRIPTION OF THE PALLET TRUCK
a. Overview of the main components
1. Electronic Control Unit
2. Castors
3. Drive motor and drive wheel
4. Foldable platform
5. Pump
6. Tiller
7. Safety (belly) button
8. Accelerator (butterfly button)
9. Battery cover
10. Battery
11. Body welding
12. Load wheels
13. Shovel fork
14. Hydraulic cylinder
15. Key switch
16. Discharge indicator
17. Emergency button
18. Protective rubber
19. Main cover
20. Backrest assembly
21. Right wing
22. Left wing
Fig. 2: Overview main components fixed
PT 20P
Fig. 1: Overview main components foldable
PT 20P

7
b. Main technical data
1.PT 20/25/30H、PT 20H PLUS foldable
2. PT 20/25/30H、PT 20H PLUS fixed
Fig. 3: Technical data
PT 20P

8
Table 1: Main technical data for standard version
Type sheet for industrial truck acc. to VDI 2198
Distinguishing mark
1.2
Manufacturer`s type designation
PT 20H
Foldable platform
Fixed platform
1.3
Power(battery,diesel,petrol gas,manual)
Battery
1.4
Operator type
Pedestrian(Stand)
Stand
1.5
Load Capacity / rated load
Q (t)
2.0
1.6
Load centre distance
c (mm)
600
1.8
Load distance, centre of drive axle to fork
x(mm)
895
1.9
Wheelbase
y (mm)
1432
Weight
2.1
Service weight
kg
730
800
2.2
Axle loading, laden front/rear
kg
975/1795
1040/1790
2.3
Axle loading, unladen front/ rear
kg
585/145
670/140
Tires, chassis
3.1
Tires
Polyurethane (PU)
3.2
Tire size, front
x w (mm)
250X80
3.3
Tire size, rear
x w (mm)
82X82
3.4
Additional wheels (dimensions)
x w (mm)
124X60
3.5
Wheels, number front/ rear(x=driven wheels)
1×+2/4
3.6
Tread, front
b10 (mm)
544
3.7
Tread, rear
b11 (mm)
380/505
Dimensions
4.4
Lift height
h3 (mm)
120
4.9
Height of tiller in drive position min. / max.
h14 (mm)
1075/1375
4.1
5
Height, lowered
h13 (mm)
85
4.1
9
Overall length
l1 (mm)
1950
2383
4.2
0
Length to face of forks
l2 (mm)
800
1233
4.2
1
Overall width
b1 (mm)
790
4.2
2
Fork dimensions
s/e/l (mm)
60/180/1150
4.2
5
Width across forks
b5 (mm)
560/685
4.3
2
Ground clearance, centre of wheelbase
m2 (mm)
25
4.3
3
Aisle width for pallets 1000 x 1200 crossways
Ast(mm)
2530
2960
4.3
4
Aisle width for pallets 800X1200 lengthways
Ast (mm)
2415
2845
4.3
5
Turning radius
Wa (mm)
1710
2140
Performance
5.1
Travel speed, laden/ unladen
km/h
9/12
5.2
Lift speed, laden/ unladen
m/s
0.035/0.048
5.3
Lowering speed, laden / unladen
m/s
0.040/0.025
5.8
Gradeability, laden/ unladen
%
6/15
5.1
0
Service brake
Electromagnetic
Motors
6.1
Drive motor rating S2 60min
kW
1.8
6.2
Lift motor rating at S3 10%
kW
2.2
6.3
Battery acc. to DIN 43531 /35 / 36 A, B, C, no
/
6.4
Battery voltage, nominal capacity K5
V/Ah
24V/150(200)
6.5
Battery weight (minimum)
kg
75
6.6
Energy consumption acc. to VDI cycle
KWh/h
0.55
Additi
onal data
8.1
Type of drive control
AC- speed control
8.4
Sound level at driver`s ear acc. to EN 12053
dB(A)
69

9
Type sheet for industrial truck acc. to VDI 2198
Distinguishing mark
1.2
Manufacturer`s type designation
PT 20H PLUS
Foldable platform
Fixed platform
1.3
Power(battery,diesel,petrol gas,manual)
Battery
1.4
Operator type
Pedestrian(Stand)
Stand
1.5
Load Capacity / rated load
Q (t)
2.0
1.6
Load centre distance
c (mm)
600
1.8
Load distance, centre of drive axle to fork
x(mm)
895
1.9
Wheelbase
y (mm)
1432
Weight
2.1
Service weight
kg
730
800
2.2
Axle loading, laden front/rear
kg
975/1795
1040/1790
2.3
Axle loading, unladen front/ rear
kg
585/145
670/140
Tires, chassis
3.1
Tires
Polyurethane (PU)
3.2
Tire size, front
x w (mm)
250X80
3.3
Tire size, rear
x w (mm)
82X82
3.4
Additional wheels (dimensions)
x w (mm)
124X60
3.5
Wheels, number front/ rear(x=driven wheels)
1×+2/4
3.6
Tread, front
b10 (mm)
544
3.7
Tread, rear
b11 (mm)
380/505
Dimensions
4.4
Lift height
h3 (mm)
120
4.9
Height of tiller in drive position min. / max.
h14 (mm)
1075/1375
4.1
5
Height, lowered
h13 (mm)
85
4.1
9
Overall length
l1 (mm)
1950
2383
4.2
0
Length to face of forks
l2 (mm)
800
1233
4.2
1
Overall width
b1 (mm)
790
4.2
2
Fork dimensions
s/e/l (mm)
60/180/1150
4.2
5
Width across forks
b5 (mm)
560/685
4.3
2
Ground clearance, centre of wheelbase
m2 (mm)
25
4.3
3
Aisle width for pallets 1000 x 1200 crossways
Ast(mm)
2530
2960
4.3
4
Aisle width for pallets 800X1200 lengthways
Ast (mm)
2415
2845
4.3
5
Turning radius
Wa (mm)
1710
2140
Performance
5.1
Travel speed, laden/ unladen
km/h
9/12
5.2
Lift speed, laden/ unladen
m/s
0.035/0.048
5.3
Lowering speed, laden / unladen
m/s
0.040/0.025
5.8
Gradeability, laden/ unladen
%
8/15
5.1
0
Service brake
Electromagnetic
Motors
6.1
Drive motor rating S2 60min
kW
2.5
6.2
Lift motor rating at S3 10%
kW
2.2
6.3
Battery acc. to DIN 43531 /35 / 36 A, B, C, no
/
6.4
Battery voltage, nominal capacity K5
V/Ah
24V/150(200)
6.5
Battery weight (minimum)
kg
75
6.6
Energy consumption acc. to VDI cycle
KWh/h
0.65
Additi
onal data
8.1
Type of drive control
AC- speed control
8.4
Sound level at driver`s ear acc. to EN 12053
dB(A)
69

10
Type sheet for industrial truck acc. to VDI 2198
Distinguishing mark
1.2
Manufacturer`s type designation
PT 25H
Foldable platform
Fixed platform
1.3
Power(battery,diesel,petrol gas,manual)
Battery
1.4
Operator type
Pedestrian(Stand)
Stand
1.5
Load Capacity / rated load
Q (t)
2.5
1.6
Load centre distance
c (mm)
600
1.8
Load distance, centre of drive axle to fork
x(mm)
895
1.9
Wheelbase
y (mm)
1432
Weight
2.1
Service weight
kg
730
800
2.2
Axle loading, laden front/rear
kg
1085/2145
1170/2140
2.3
Axle loading, unladen front/ rear
kg
585/145
670/140
Tires, chassis
3.1
Tires
Polyurethane (PU)
3.2
Tire size, front
x w (mm)
250X80
3.3
Tire size, rear
x w (mm)
82X82
3.4
Additional wheels (dimensions)
x w (mm)
124X60
3.5
Wheels, number front/ rear(x=driven wheels)
1×+2/4
3.6
Tread, front
b10 (mm)
544
3.7
Tread, rear
b11 (mm)
380/505
Dimensions
4.4
Lift height
h3 (mm)
120
4.9
Height of tiller in drive position min. / max.
h14 (mm)
1075/1375
4.1
5
Height, lowered
h13 (mm)
85
4.1
9
Overall length
l1 (mm)
1950
2383
4.2
0
Length to face of forks
l2 (mm)
800
1233
4.2
1
Overall width
b1 (mm)
790
4.2
2
Fork dimensions
s/e/l (mm)
60/180/1150
4.2
5
Width across forks
b5 (mm)
560/685
4.3
2
Ground clearance, centre of wheelbase
m2 (mm)
25
4.3
3
Aisle width for pallets 1000 x 1200 crossways
Ast(mm)
2530
2960
4.3
4
Aisle width for pallets 800X1200 lengthways
Ast (mm)
2415
2845
4.3
5
Turning radius
Wa (mm)
1710
2140
Performance
5.1
Travel speed, laden/ unladen
km/h
8/9
5.2
Lift speed, laden/ unladen
m/s
0.030/0.048
5.3
Lowering speed, laden / unladen
m/s
0.045/0.025
5.8
Gradeability, laden/ unladen
%
6/15
5.1
0
Service brake
Electromagnetic
Motors
6.1
Drive motor rating S2 60min
kW
2.5
6.2
Lift motor rating at S3 10%
kW
2.2
6.3
Battery acc. to DIN 43531 /35 / 36 A, B, C, no
/
6.4
Battery voltage, nominal capacity K5
V/Ah
24V/150(200)
6.5
Battery weight (minimum)
kg
75
6.6
Energy consumption acc. to VDI cycle
KWh/h
0.75
Additi
onal data
8.1
Type of drive control
AC- speed control
8.4
Sound level at driver`s ear acc. to EN 12053
dB(A)
69

11
Type sheet for industrial truck acc. to VDI 2198
Distinguishing mark
1.2
Manufacturer`s type designation
PT 30H
Foldable platform
Fixed platform
1.3
Power(battery,diesel,petrol gas,manual)
Battery
1.4
Operator type
Pedestrian(Stand)
Stand
1.5
Load Capacity / rated load
Q (t)
3.0
1.6
Load centre distance
c (mm)
600
1.8
Load distance, centre of drive axle to fork
x(mm)
895
1.9
Wheelbase
y (mm)
1432
Weight
2.1
Service weight
kg
730
800
2.2
Axle loading, laden front/rear
kg
1195/2495
1260/2490
2.3
Axle loading, unladen front/ rear
kg
585/145
670/140
Tires, chassis
3.1
Tires
Polyurethane (PU)
3.2
Tire size, front
x w (mm)
250X80
3.3
Tire size, rear
x w (mm)
82X82
3.4
Additional wheels (dimensions)
x w (mm)
124X60
3.5
Wheels, number front/ rear(x=driven wheels)
1×+2/4
3.6
Tread, front
b10 (mm)
544
3.7
Tread, rear
b11 (mm)
380/505
Dimensions
4.4
Lift height
h3 (mm)
120
4.9
Height of tiller in drive position min. / max.
h14 (mm)
1075/1375
4.1
5
Height, lowered
h13 (mm)
85
4.1
9
Overall length
l1 (mm)
1950
2383
4.2
0
Length to face of forks
l2 (mm)
800
1233
4.2
1
Overall width
b1 (mm)
790
4.2
2
Fork dimensions
s/e/l (mm)
60/180/1150
4.2
5
Width across forks
b5 (mm)
560/685
4.3
2
Ground clearance, centre of wheelbase
m2 (mm)
25
4.3
3
Aisle width for pallets 1000 x 1200 crossways
Ast(mm)
2530
2960
4.3
4
Aisle width for pallets 800X1200 lengthways
Ast (mm)
2415
2845
4.3
5
Turning radius
Wa (mm)
1710
2140
Performance
5.1
Travel speed, laden/ unladen
km/h
6/7
5.2
Lift speed, laden/ unladen
m/s
0.030/0.042
5.3
Lowering speed, laden / unladen
m/s
0.040/0.025
5.8
Gradeability, laden/ unladen
%
6/15
5.1
0
Service brake
Electromagnetic
Motors
6.1
Drive motor rating S2 60min
kW
2.5
6.2
Lift motor rating at S3 10%
kW
2.2
6.3
Battery acc. to DIN 43531 /35 / 36 A, B, C, no
/
6.4
Battery voltage, nominal capacity K5
V/Ah
24V/150(200)
6.5
Battery weight (minimum)
kg
75
6.6
Energy consumption acc. to VDI cycle
KWh/h
0.65
Additi
onal data
8.1
Type of drive control
AC- speed control
8.4
Sound level at driver`s ear acc. to EN 12053
dB(A)
69

12
c. Description of the safety devices and warning labels
Fig. 5: Safety and warning labels fixed
PT 20P
Fig. 4: Safety and warning labels foldable

13
A Sticker to read and follow this instruction
B “No passengers” decal
C Capacity sticker
D Crane hook label
E Identification plate (ID-plate)
F Sign oil filling point
The truck is equipped with an emergency button (17) which stops all lifting-, lowering-, driving-
functions and engages the failsafe electromagnetic brake when it is pushed.
The truck is equipped with a safety (belly) button (7) which switches the driving function away from
the operator, if the truck travels towards the operator and the tiller is activated in the tillers operating
zone or position. Follow also the instructions given on the decals. Replace the decals if they are
damaged or missing.
By activating the safety (belly) button (7) the truck is braking until it stops.
d. Identification plate
1 Designation, type
2 Serial number
3 Rated capacity in kg
4 Supply voltage in V
5 Own mass (self weight) in kg without battery
6 Name and address of manufacturer)
7 Battery weight minimum/ maximum
8 Nominal power in kW
9 Load center distance
10 Manufacturing date
11 Option
1
2
4
5
3
7
If sold to the EU, here the place
of the CE marking
6
8
9
10
11
Fig. 6: Identification plate

10
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS
•DO NOT
•Put foot or hand under or into the lifting mechanism.
•Allow other person than the operator to stand in front of or behind the truck when it
is moving or lifting/lowering.
•Overload the truck.
•Put foot in front of the wheels, injury could result.
•Lift people. People could fall down and suffer severe injury.
•Push or pull loads
•Use this truck on ramps
•Side or end load. Load must be distributed evenly on the forks.
•Use the truck with unstable, unbalanced not stable load.
•Use truck without manufacturer’s written consent.
•Lifted loads could become unstable at wind forces. In the case of wind forces do
not lift the load if there is any influence to the stability
Watch difference in floor levels when driving. Load could fall down or the truck could get
uncontrollable.
Keep watching the condition of load. Stop operating the truck if load becomes unstable.
Brake the truck and activate the emergency switch (17) by pushing when sliding load on or off the
truck. If the truck has any malfunctions, follow chapter 6.
Practice maintenance work according to regular inspection. This truck is not designed to be water
resistant. Use the truck under dry condition. Prolonged continuous operation might cause damage of the
power pack. Stop operation if temperature of hydraulic oil is too high.
•When operating the electric pallet truck, the operator has to wear safety shoes.
•The truck is intended to be used for indoor applications with ambient temperatures
between +5C and + 40C.
•The operating lighting must be minimum 50 Lux.
•It is not allowed to use the truck on ramps.
•To prevent unintended sudden movements when not operating the tuck (i.e. from another
person, etc.) switch of f the truck when not operating it.

11
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING
a. Commissioning
Table 2: Commissioning data
Type
PT 20/25/30H PT20PLUS
foldable
PT 20/25/30H PT20PLUS
fixed
Commissioning weight [kg]
app.750Kg
app.850Kg
Dimension [mm]
2000x790x1450
2450x790x1450
After receiving our new pallet truck or for re-commissioning you have to do following before (firstly)
operating the truck:
•Check if are all parts included and not damaged
•Eventually installation of the multifunction tiller
•Eventually installation and charging the batteries (follow chapter 7)
•Do the work according to the daily inspections as well as functional checks
b. Lifting/ transportation
For transporting, remove the load, lower the forks to the lowest position and fix the truck safe with
dedicated lifting gear according to the following figures.
Lifting
USE DEDICATED CRANE AND LIFTING EQUIPMENT
DO NOT STAND UNDER THE SWAYING LOAD
DO NOT WALK INTO THE HAZARDOUS AREA DURING LIFTING
Fig. 8: Lifting with a crane fixed
20P
Fig. 7: Lifting with a crane foldable

12
Park the truck securely and lash the truck according to the points identified in fig. 8 or fig. 9.
Lift the truck to its destination and place the truck securely before removing the lifting gear.
The lashing points are according to the fig. 7 or fig. 8。
.
Transportation
DURING TRANSPORTATION ON A LORRY OR TRUCK ALWAYS FASTEN THE
TRUCK SECURELY
Lower the forks and park the truck securely.
Fasten the truck according to fig.9or fig.10 by fixing dedicated lashing belts to each side of the truck’s
crane hook holes and fasten the other side at the transporting truck.
c. Decommissioning
For storage, remove the load, lower the truck to the lowest position, grease all in this handbook
mentioned greasing points (regular inspection), eventually protect the truck against corrosion and
dust. Remove the batteries and jack the truck safely, so that there will be no flattening after storage.
For final decommissioning hand the truck to a designated recycling company. Oil, batteries and
electric components must be recycled due to legal regulations.
Fig.9: fixing points foldable
Fig.10: fixing points fixed

13
5. DAILY INSPECTION
This chapter describes pre-shift checks before putting the truck into operation.
Daily inspection is effective to find the malfunction or fault on this truck. Check the truck on the
following points before operation.
Remove load from truck and lower the forks.
DO NOT USE THE TRUCK IF ANY MALFUNCTION IS FOUND
•Check for scratches, deformation or cracks.
•Check if there is any oil leakage from the cylinder.
•Check the vertical creep of the truck.
•Check the smooth movement of the wheels.
•Check the function of the emergency brake by activating the emergency button.
•Check, the tiller arm- switch braking function
•Check the lifting and lowering functions by operating the buttons.
•Check if all bolts and nuts are tightened firmly.
•Visual check if there are any broken hoses or broken electric wires.
6. OPERATING INSTRUCTIONS
BEFORE OPERATING THIS TRUCK, PLEASE FOLLOW THE WARNINGS AND
SAFETY INSTRUCTIONS (CHAPTER 3)
Make sure, that the load is palletized and stable and that
the daily inspection is carried out.
Insert the key switch (15), turn on it. Press the horn button
(23) to activate the audible warning signal.
a. Parking
DO NOT PARK THE TRUCK ON INCLINED SURFACES
The truck is equipped with an electromagnetic failsafe stopping and parking brake.
Always lower the forks fully. Press the emergency switch (17).
Fig.11: Tiller operating
controls

14
b. Lifting
DO NOT OVERLOAD THE TRUCK!
THE MAXIMUM CAPACITY IS 2000/2500/3000 kg
Travel with the lowered forks fully underneath the pallet until the load and press the lifting button (24)
until you reached the desired lifting height
c. Lowering
Press the lowering button (24) carefully.
Lower the load until the forks are clear of the pallet,
then drive the truck carefully out of the load unit.
d. Travelling
TRAVEL ON INCLINES ONLY WITH THE
LOAD FACING UPHILL.
DO NOT TRAVEL ON INCLINES MORE
THAN SPECIFIED WITH THE TECHNICAL DATA
Foldable platform
After starting the truck by turning on the key switch (15), move the tiller to the operating zone (‘F’, fig.13).
Turn the accelerator button to the desired direction forward ‘Fw.’ or backwards Bw.’(fig. 13)
Fig. 12: Load facing uphill
Fig. 13: Operating direction

15
Besides the pedestrian mode, following travelling modes can be used:
•Travelling with platform (4) folded downside and sideways arms (18) in protective position
Travelling with maximum speed.
•Travelling with platform (4) folded downside and sideways arms (18) folded downside
Depending on the Controllers parameter setting, the speed might be lower, but not higher than
6km/h.
Travelling with platform (4) folded upright and sideways arms (18) folded downside
Depending on the Controllers parameter setting, the speed might be lower, but not higher than 6km/h.
Fixed platform
After starting the truck by turning on the key switch (18), move the tiller to the operating position (fig.14).
Turn the accelerator button to the desired direction forward ‘Fw.’ or backwards Bw.’(fig. 14).
Control the travelling speed by moving the accelerator button (8) carefully until you reached the
desired speed.
If you move the accelerator button back to the neutral position, the controller decelerates the truck
until the truck stops. If the truck stopped, the parking brake will be engaged.
Drive carefully the truck to the destination. Watch the route conditions and adjust the travelling speed
with the accelerator button.
e. Steering
THE TRUCK IS EQUIPPED WITH AN ELECTRIC STEERING SYSTEM. TAKE CARE BY
OPERATING THE TRUCK; THE BEHAVIOR OF THE TRUCK MIGHT BE DIFFERENT THAN
TO ATRUCK WITHOUT ELECTRIC STEERING SYSTEM。
You steer the truck by moving the tiller to the left or right side.
Fig. 14: Operating direction