Noblelift PTE15Q-A User manual

0
Version 08/2021
PTE15Q-A -SMS-001-EN
WARNING
Do not use the pallet truck before reading and
understanding these operating instructions.
NOTE:
Please check the designation of your
present type at the last page of this
document as well as on the ID-plate.
Keep for future reference.
INSTRUCTION MANUAL
Electric Pallet Truck
PTE15Q-A

1
FOREWORD
Before operating the truck, read this ORIGINAL INSTRUCTION MANUAL carefully and understand the
usage of the truck completely. Improper operation could create danger.
This manual describes the usage of different electric pallet trucks. When operating and servicing the
truck, make sure, that it applies to your type.
Keep this manual for future reference. If this or the warning/ caution labels are damaged or get lost,
please contact your local dealer for replacement.
This truck complies with the requirements according to EN 12895 (Industrial trucks- electromagnetic
compatibility), EN 12053 (Safety of industrial trucks- test methods for measuring noise emissions),
assumed the truck is used according to the described purpose.
ATTENTION:
Environmentally hazardous waste, such as batteries, oil and electronics, will have a
negative effect on the environment, or health, if handled incorrectly.
The waste packages should be sorted and put into solid dustbins according to the
materials and be collected disposal by local special environment protection bureau. To
avoid pollution, it’s forbidden to throw away the wastes randomly.
To avoid leaking during the use of the products, the user should prepare some
absorbable materials (scraps of wooden or dry duster cloth) to absorb the leaking oil in
time. To avoid second pollution to the environment, the used absorbable materials
should be handed in to special departments in terms of local authorities.
Our products are subject to ongoing developments. Because this manual is only for the
purpose of operating /servicing the pallet truck, therefore please have understanding,
that there is no guarantee out of particular features out of this manual.
NOTE: In this manual, the left symbol indicates warning and danger, which may lead
to death or serious injury if not followed.
Copyright
The copyright remains with the company, mentioned on the CE- certificate at the end of this document or,
if sold within the USA, with the company, mentioned on the company sticker.

2
TABLE OF CONTENTS
1. CORRECT APPLICATION...................................................................................................................................4
2. DESCRIPTION OF THE PALLET TRUCK........................................................................................................5
a. Overview of the main components................................................................................................................. 5
b. Technical data.................................................................................................................................................... 6
c. Description of the safety devices and warning labels (Europe and other, excepting USA)..................8
d. Identification plate..............................................................................................................................................9
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS..................................................................9
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING...................................................................10
a. Commissioning................................................................................................................................................ 10
b. Hoisting/ transportation.................................................................................................................................. 10
c. Decommissioning.............................................................................................................................................11
5. DAILY INSPECTION........................................................................................................................................... 11
6. OPERATING INSTRUCTIONS......................................................................................................................... 12
a. Parking.............................................................................................................................................................. 12
b. Lifting................................................................................................................................................................. 12
c. Lowering............................................................................................................................................................12
d. Travelling...........................................................................................................................................................13
e. Steering.............................................................................................................................................................13
f. Braking............................................................................................................................................................... 14
g. Malfunctions..................................................................................................................................................... 14
h. Emergency....................................................................................................................................................... 14
7. BATTERY SAFETY, CHARGING AND REPLACEMENT.............................................................................14
a. Safety Instructions...........................................................................................................................................15
b. Matters requiring attention.............................................................................................................................16
c. Replacement.................................................................................................................................................... 16
d. Tiller panel........................................................................................................................................................ 17
e. Charging........................................................................................................................................................... 17
8. REGULAR MAINTENANCE..............................................................................................................................19
a. Maintenance checklist.................................................................................................................................... 19
b. Lubricating points............................................................................................................................................ 21
c. Check and refill hydraulic oil..........................................................................................................................21
d. Checking electrical fuses............................................................................................................................... 22
9. TROUBLE SHOOTING...................................................................................................................................... 22
10. WIRING/ CIRCUIT DIAGRAM........................................................................................................................ 24
a. Electrical circuit diagram................................................................................................................................ 24
b. Hydraulic circuit diagram................................................................................................................................25
11. SPECIALIZED STIPULATIONS FOR THE US- AMERICAN MARKET...................................................26
a. Foreword/ Compliance................................................................................................................................... 26
b. Identification plate........................................................................................................................................... 27

3
c. Description warning labels (only US- market)............................................................................................ 28
d. Technical data for US market........................................................................................................................ 29
12. DECLARATION OF CONFORMITY (valid, if sold within EU)................................................................... 32

4
1. CORRECT APPLICATION
It is only allowed to use this electric pallet truck according to this instruction handbook.
The trucks described in this handbook are self-propelled electric power pallet trucks. The trucks are
designed to lift, lower and transport palletized loads.
A wrong usage can cause human injuries or can damage equipment.
The operator/ the operating company has to ensure the correct usage and has to ensure, that this pallet
truck is used only by staff, which is trained and authorized to use this truck.
The pallet truck has to be used on substantially firm, smooth, prepared, level and adequate surfaces.
The truck is intended to be used for indoor applications with ambient temperatures between +5C and +
40C and for various transportation applications without crossing permanent obstacles or potholes. The
work on ramps is allowed if ramp is not exceeding the allowed angle. While operating, the load must be
placed approximately on the longitudinal center plane of the truck.
Lifting or transporting people is forbidden.
If used on tail lifts or loading ramps, please ensure that these are used correctly according to the
operating instructions.
The capacity is marked on capacity sticker as well on the Identification plate. The operator has to
consider the warnings and safety instructions.
Operating lighting must be minimum 50 Lux.
Modification
No modifications or alterations to this pallet truck which may affect, for example, capacity, stability or
safety requirements of the truck, shall be made without the prior written approval of the original truck
manufacturer, its authorized representative, or a successor thereof. This includes changes affecting, for
example braking, steering, visibility and the addition of removable attachments. When the manufacturer
or its successor approve a modification or alteration, they shall also make and approve appropriate
changes to capacity plate, decals, tags and operation and maintenance handbooks.
By not observing these instructions, the warranty becomes void.

5
2. DESCRIPTION OF THE PALLET TRUCK
a. Overview of the main components
1. Safety (belly) button
2. Tiller
3. Magnetic lock
4. Discharge charging indicator
5. Battery connector plug
6. Plastic cover
7. Chassis
8. Fork
9. Load roller
10. Battery
11. Apron
12. Drive unit
13. Side roller (optional)
Fig. 1: Overview of the main components

6
b. Technical data
Fig. 2: Technical data

7
Table 1: Main technical data for standard version
Type sheet for industrial truck acc. to VDI 2198
Distinguishing mark
1.2
Manufacturer`s type designation
PTE15Q-A
1.3
Drive
Electric
1.4
Operator type
Pedestrian
1.5
Load Capacity / rated load
Q (t)
1.5
1.6
Load centre distance
c (mm)
600
1.8
Load distance ,centre of drive axle to fork
x (mm)
947
1.9
Wheelbase
y (mm)
1189
Weight
2.1
Service weight
kg
127
131
2.2
Axle loading, laden front/rear
kg
626 / 1001
629 / 1002
2.3
Axle loading, unladen front/rear
kg
99 / 28
102 / 29
Tyres, chassis
3.1
Tires
Polyurethane (PU)
3.2
Tire size,front
x w (mm)
210×75
3.3
Tire size,rear
x w (mm)
80×70(80×93)
3.4
Additional wheels(dimensions)
x w (mm)
-/80×30
3.5
Wheels,number front/rear(x=driven wheels)
(1x/ 4) 0r 1x +2/ 2(1x +2/ 4)
3.6
Tread, front
b10 (mm)
-/430
3.7
Tread, rear
b11 (mm)
380
525
Dimensions
4.4
Lift
h3(mm)
115
4.9
Height of tiller in drive position min./ max.
h14 (mm)
655 / 1160
4.15
Height, lowered
h13 (mm)
80
4.19
Overall length
l1(mm)
1543
4.20
Length to face of forks
l2(mm)
393
4.21
Overall width
b1(mm)
540
685
4.22
Fork dimensions
s/e/l (mm)
50 / 160 / 1150
4.25
Width Across Forks
b5(mm)
540
685
4.32
Ground clearance, centre of wheelbase
m2(mm)
30
4.34
Aisle width for pallets800X1200 lengthways
(200mm safe distance)
Ast (mm)
2013
4.35
Turning radius
Wa (mm)
1340
Performance
5.1
Travel speed, laden/ unladen
km/h
4.3/4.9
5.2
Lift speed, laden/ unladen
m/s
0.015/0.022
5.3
Lowering speed, laden/ unladen
m/s
0.05 / 0.026
5.8
Max. gradeability, laden/ unladen
%
6 / 16
5.10
Service brake
Electromagnetic
Electric- engine
6.1
Drive motor rating S2 60min
kW
0.75
6.2
Lift motor rating at S3 10%
kW
0.50
6.3
Battery acc. to DIN 43531/ 35/ 36 A, B, C, no
No
6.4
Battery voltage, nominal capacity K5
V / Ah
24 / 20
6.5
Battery weight
kg
6.5
6.6
Energy consumption acc. to VDI cycle
kWh/h
0.25
Additio
n data
8.1
Type of drive control
DC speed Control

8
c. Description of the safety devices and warning labels
(Europe and other, excepting USA)
A Sticker to observe and follow this instruction
B Decal on motor cover
C Oil filling decal
D Model sticker (ATOM)
E “No passengers” decal
F Crane hook label
G Identification plate (ID-plate)
H Capacity label
I Battery ID plate
J No collision sticker
K Battery warning sticker
L Charger ID plate
M Warning sticker (operation steps)
R Sticker to read and follow maintenance manual
T Warning sticker (hands pinching)
U Sticker (do not discard the label)
Fig. 3: Safety and warning labels

9
The truck is equipped with a battery connector plug (5), which stops all lifting-, lowering-, driving-
functions and engages the fail-safe electromagnetic brake when it is pulled and disconnected. The truck
can be operated after checking the controller functions and connecting the battery connector plug (5).
Before operating, insert the magnetic lock (3) to start the truck.
To prevent unauthorized access, remove the magnetic lock (3).
The truck is equipped with a safety (belly) button (1) which switches the driving function away from the
operator, if the truck travels towards the operator and the tiller is activated in the tillers operating zone.
Follow also the instructions given on the labels and decals. Replace the label and decals in time if they
are damaged or missing.
d. Identification plate
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS
DO NOT
Put foot or hand under or into the lifting mechanism.
Allow other person than the operator to stand in front of or behind the truck when it is
moving or lifting/lowering.
Overload the truck.
Put foot in front of the wheels, injury could result.
Lift people. People could fall down and suffer severe injury.
Push or pull loads.
Side or end load. Load must be distributed evenly on the forks.
Use the truck with unstable or unbalanced load.
Pallet Truck
Type
xxxx
Rated capacity
xxxx kg
Rated voltage
xx V
Service weight
without battery
xxxx kg
Battery weight
maximum
xxx kg
Battery weight
minimum
xxx kg
Net weight (without
load and battery)
xxx kg
Lift height
maximum
xxxx mm
Serial number
XXXXXXXXXX
Equipment code
XXXXXXXXXX
Manufacturing Name XXXXXXXXXXXXXXX
Manufacturing Address XXXXXXXXXXXXXXX
Fig. 4: Identification plate
Check the ID plate taped on the truck for contents and type.