Nokia HF-33W - Wireless Plug-in Car Handsfree User manual

Nokia Wireless Plug-in Car
Handsfree HF-33W
Issue 1
1
23
5
6
7
4

DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares
that this HF-33W product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. The
product is in conformity with the limits
defined in Directive 2004/104/EC
(amending Directive 72/245/EEC), Annex
I, paragraph 6.5, 6.6, 6.8 and 6.9.
A copy of the Declaration of Conformity
can be found at: http://www.nokia.com/
phones/declaration_of_conformity/.
© 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or
storage of part or all of the contents in
this document in any form without the
prior written permission of Nokia is
prohibited.
Nokia and Nokia Connecting People are
registered trademarks of Nokia
Corporation. Other product and company
names mentioned herein may be
trademarks or tradenames of their
respective owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Nokia operates a policy of continuous
development. Nokia reserves the right to
make changes and improvements to any
of the products described in this
document without prior notice.
Under no circumstances shall Nokia be
responsible for any loss of data or
income or any special, incidental,
consequential or indirect damages
howsoever caused.
The contents of this document are
provided "as is". Except as required by
applicable law, no warranties of any kind,
either express or implied, including, but
not limited to, the implied warranties of

merchantability and fitness for a
particular purpose, are made in relation
to the accuracy, reliability or contents of
this document. Nokia reserves the right
to revise this document or withdraw it at
any time without prior notice.
The availability of particular products
may vary by region. Please check with the
Nokia dealer nearest to you.
Unauthorized changes or modifications
to this device may void the user's
authority to operate the equipment.
Export Controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and
other countries. Diversion contrary to law
is prohibited.
For your safety
Read these simple guidelines. Not
following them may be dangerous or
illegal.
ROAD SAFETY COMES
FIRST
Obey all local laws. Always
keep your hands free to
operate the vehicle while
driving. Your first
consideration while driving
should be road safety.
INTERFERENCE
All wireless devices may be
susceptible to interference,
which could affect
performance.

Introduction
The Nokia Wireless Plug-in Car
Handsfree HF-33W allows you to
make and receive hands-free calls
in your car. You can connect the
handsfree to a compatible phone
that supports Bluetooth wireless
technology.
Read this user guide carefully
before using the handsfree. Also
read the user guide for your phone,
which provides important safety
and maintenance information.
Keep the handsfree out of reach of
small children.
Bluetooth wireless technology
Bluetooth wireless technology
allows you to connect compatible
devices without cables. In a
Bluetooth connection, the phone
and the handsfree should be within
10 meters (30 feet) of each other.
Connections can be subject to
interference from obstructions,
such as other electronic devices.
The handsfree is compliant with
the Bluetooth Specification 1.2
supporting the Handsfree Profile
1.5. Check with the manufacturers
of other devices to determine their
compatibility with this device.
There may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service provider.

Get started
Before using the handsfree, you
must install it in the car, and pair it
with a compatible phone.
The handsfree contains the
following parts shown at the start
of this guide: tiltable cigarette
lighter plug (1), microphone (2),
indicator light (3), volume up key
(4), volume down key (5), call key
(6), and speaker (7).
Install the handsfree
To function properly, the handsfree
must be connected to the cigarette
lighter socket of the car, and power
must be supplied by the 12-volt car
battery.
Insert the handsfree into the
cigarette lighter socket. The
cigarette lighter plug is provided
with a removable cap. If the plug
does not fit in the socket, remove
the cap by sliding it from the plug.
You can tilt the cigarette lighter
plug to the desired angle (up to 100
degrees). Do not try to force the
plug to tilt more.
Ensure that the handsfree is
properly inserted in the cigarette
lighter socket, and does not
interfere with the normal operation
of the car.
In some car models, the cigarette
lighter socket is powered by the car
battery even when you remove the
ignition key. In those cases, the car
battery might be discharged even if
the handsfree is not used. Contact

the vehicle manufacturer for more
information.
Switch on or off
To switch on, plug the handsfree
into the cigarette lighter socket.
The indicator light turns on.
To switch off, pull the handsfree
out from the cigarette lighter
socket.
Pair the handsfree
1. Switch on your phone.
2. Ensure that the handsfree is
plugged properly into the
cigarette lighter socket.
3. Activate the Bluetooth feature
on the phone, and set the phone
to search for Bluetooth devices.
4. Select the handsfree from the
list of found devices.
5. Enter the Bluetooth passcode
0000 to pair and connect the
handsfree to your phone. In
some phones you may need to
make the connection separately
after pairing.
If the pairing is successful, the
handsfree sounds a beep and
appears in the phone menu where
you can view the currently paired
Bluetooth devices. When the
handsfree is connected with your
phone, the blue indicator light is
displayed.
You can set your phone to connect
with the handsfree automatically
when the handsfree is switched on.
To do this in Nokia phones, change
your paired device settings in the
Bluetooth menu.
To disconnect the handsfree from
your phone, pull the handsfree out
from the cigarette lighter socket,

or disconnect the handsfree in the
Bluetooth menu of the phone.
To reconnect the paired handsfree
to your phone, plug the handsfree
into the cigarette lighter socket.
To pair and connect the handsfree
with a new phone, first disconnect
the handsfree in the Bluetooth
menu of the currently connected
phone, and then pair and connect
the new phone.
Call handling
To adjust the volume during a call,
use the volume keys on the
handsfree.
To make a call, use your phone in
the normal way when the
handsfree is connected to your
phone. Speak toward the handsfree
microphone. For optimal
performance, check that there are
no objects in front of the
microphone and that the
microphone is in front of the user,
not beneath or behind. The green
indicator light is displayed during a
call.
If your phone supports last number
redial with the handsfree, press the
call key twice when no call is in
progress.
If your phone supports voice dialing
with the handsfree, press and hold
the call key when no call is in
progress, and proceed as described
in the user guide of your phone.
When you receive a call, you hear a
ringing tone through the handsfree

speaker and the green indicator
light flashes. To answer the call,
press the call key, or use the phone
keys. To reject the call, press the
call key twice. To transfer the
active call between the handsfree
and your phone, press and hold the
call key.
To end a call, press the call key, or
use the phone keys.
Care and maintenance
Your device is a product of superior
design and craftsmanship and should
be treated with care. The suggestions
below will help you protect your
warranty coverage.
• Keep all accessories and
enhancements out of the reach of
small children.
• Keep the device dry. Precipitation,
humidity, and all types of liquids
or moisture can contain minerals
that will corrode electronic
circuits. If your device does get
wet, allow it to dry completely.
• Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
• Do not store the device in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries, and
warp or melt certain plastics.
• Do not store the device in cold
areas. When the device returns to
its normal temperature, moisture
can form inside the device and
damage electronic circuit boards.

• Do not attempt to open the device.
• Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
• Do not use harsh chemicals,
cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can
clog the moving parts,
microphone, or speaker, and
prevent proper operation.
If the device is not working properly,
take it to the nearest authorized
service facility for service.
Additional safety information
■Vehicles
RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles
such as electronic fuel injection
systems, electronic antiskid (antilock)
braking systems, electronic speed
control systems, and air bag systems.
For more information, check with the
manufacturer or its representative of
your vehicle or any equipment that
has been added.
Faulty installation or service may be
dangerous and may invalidate any
warranty that may apply to the
device. Check regularly that all
wireless device equipment in your
vehicle is mounted and operating
properly. Do not store or carry
flammable liquids, gases, or explosive
materials in the same compartment as

the device, its parts, or
enhancements. For vehicles equipped
with an air bag, remember that air
bags inflate with great force. Do not
place objects, including installed or
portable wireless equipment in the
area over the air bag or in the air bag
deployment area. If in-vehicle
wireless equipment is improperly
installed and the air bag inflates,
serious injury could result.