NordicTrack CX 925 User manual

CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
odel No. NEL07940
Serial No. _
Serial Number
Decal
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTO ER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
CUSTO ER HOT LINE:
1-888-825-2588
on.–Fri., 6 a.m.–6 p.m. ST
USER’S ANUAL
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
Patent Pending
All manuals and user guides at all-guides.com
all-guides.com

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE OU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2
I PORTANT PRECAUTIONS
WARNING:To reduce the risk of serious injury, read the following important precau-
tions before using the elliptical exerciser.
1. Read all instructions in this manual before
using the elliptical exerciser.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
3. The elliptical exerciser is intended for
in-home use only. Do not use the elliptical
exerciser in a commercial, rental, or institu-
tional setting.
4. Place the elliptical exerciser on a level sur-
face, with a mat beneath it to protect the
floor or carpet. Keep the elliptical exerciser
indoors, away from moisture and dust.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the elliptical exerciser at all times.
7. The elliptical exerciser should not be used
by persons weighing more than 250 pounds.
8. Wear appropriate exercise clothing when
using the elliptical exerciser. Always wear
athletic shoes for foot protection.
9. Always hold the handgrip pulse sensor or
the handlebars when mounting, dismount-
ing, or using the elliptical exerciser.
10. Keep your back straight when using the ellip-
tical exerciser; do not arch your back.
11. If you feel pain or dizziness while exercis-
ing, stop immediately and cool down.
12. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
13. When you stop exercising, allow the pedals
to slowly come to a complete stop. The ellip-
tical exerciser does not have a free wheel;
the pedals will continue to move until the
flywheel stops.
WARNING:Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health prob-
lems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
NordicTrack is a registered trademark of ICON Health & Fitness, Inc.
All manuals and user guides at all-guides.com

3
BEFORE YOU BEGIN
Congratulations for selecting the new NordicTrack®
CX 925 elliptical exerciser. The CX 925 is an incredi-
bly smooth exerciser that moves your feet in a natural
elliptical path, minimizing the impact on your knees
and ankles. And the unique CX 925 offers an impres-
sive array of features to help you achieve your fitness
goals in the convenience of your home. Welcome to a
whole new world of natural, elliptical-motion exercise
from NordicTrack.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
tions after reading this manual, please call our
Customer Service Department toll-free at 1-888-825-
2588, Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time (excluding holidays). To help us assist
you, please note the product model number and serial
number before calling. The model number is
NEL07940. The serial number can be found on a
decal attached to the elliptical exerciser (see the front
cover of this manual for the location of the decal).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Water Bottle Holder*
*No water bottle is included
Handlebar
Handgrip Pulse Sensor
FRONT
BACK
RIGHT SIDE
Wheel
Pedal
Fan
Console
Upright
Leveling Foot
Pedal Leg
All manuals and user guides at all-guides.com

4
ASSE BLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included allen wrenches and your own phillips screwdriver and
rubber mallet .
As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly.
The number in parentheses below each drawing refers to the key number of the part, from the PART LIST on
page 21. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled. If a part is not in the parts bag, check to see if it is pre-assembled.
M8 x 54mm Button Screw (83)–4
M8 x 44mm Button Screw (84)–8
M10 Split
Washer (73)–2 7.6mm Spacer
(47)–2 M4 x 16mm
Screw (94)–4
M8 x 79mm Bolt Set (65)–2
M10 x 108mm Button Screw (70)–2
1. Identify the Front Stabilizer (8). While another person
lifts the front of the Frame (1) and holds the Pedal
Legs (4, 5) in the position shown, attach the Front
Stabilizer to the Frame with four M8 x 44mm Button
Screws (84) and a Support Plate (64).
While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (not shown) to the Frame
in the same way.
1
8
4, 5
1
64
84
84
All manuals and user guides at all-guides.com

5
2. Have another person hold the Upright (2) in the posi-
tion shown. ake sure that the Upright is turned as
shown in drawing 3 below, and that the Upper Wire
Harness (30) is on the right side of the indicated
metal plate.
Connect the Upper Wire Harness (30) to the Lower
Wire Harness (42). Carefully pull the upper end of
the Upper Wire Harness to remove the slack from
the Wire Harnesses. Insert the Upright (2) into the
Frame (1). Be careful to avoid disconnecting or
pinching the Wire Harnesses. Attach the Upright with
two M10 x 108mm Button Screws (70), two M10 Split
Washers (73), and two 7.6mm Spacers (47). ake
sure that the curved sides of the Spacers are fac-
ing the Upright. Be careful to avoid damaging the
Wire Harnesses with the Button Screws. Do not
tighten the Button Screws yet.
2
30
Plate
70 42
1
73
73
47
2
47
3
31
29 28
Grease
2
96 29
3. Slide a Weld Spacer (28) onto the axle on the left side
of the Upright (2), with the open side of the Weld
Spacer facing the Upright. Apply a small amount of
grease to the axle.
Slide an Upper Body Arm (29) onto the axle on the left
side of the Upright (2). Using the included Push Nut
Tool (96), tap a Push Nut (31) onto the axle; make
sure that the Push Nut is turned as shown in the
inset drawing.
Attach the other Upper Body Arm (29) to the right
side of the Upright (2) in the same way.
26
29
2
26
26
4. Look inside one of the Handlebar Covers (26) and
locate the square tabs connecting the two halves.
Gently lift the tabs and disconnect the halves.
Hold the two halves of the Handlebar Cover (26)
around the tube on the left side of the Upright (2). Align
the halves and press them together until they lock.
Attach the other Handlebar Cover (26) to the right side
of the Upright (2) in the same way.
4
Axle
Axle
31
All manuals and user guides at all-guides.com

6
5. Identify the Left Pedal (10), which has a notch near
the right side. Place the Left Pedal on the Left Pedal
Leg (4). Next, apply the entire contents of one of the
included Teflon®lubricant packets to the long side of
an M8 x 79mm Bolt Set (65) and the faces of the two
indicated Upper Body Arm Bushings (12). Have a sec-
ond person hold the lower end of the left Upper Body
Arm (29) inside of the bracket on the Left Pedal Leg.
Align the indicated holes, and attach the Left Pedal
and the left Upper Body Arm to the Left Pedal Leg with
the M8 x 79mm Bolt Set.
Attach the other end of the Left Pedal (10) to the Left
Pedal Leg (4) with two M8 x 54mm Button Screws (83).
Repeat this step on the right side of the elliptical exer-
ciser.
See step 2. Tighten the two M10 x 108mm Button
Screws (70).
4
10
83
65
565
Notch
Lube
29
6. The Console (17) requires four “D” batteries (not
included); alkaline batteries are recommended. Slide
the battery cover off the Console. Insert four batteries
into the battery compartment. ake sure that the bat-
teries are oriented as shown by the diagram inside
the battery compartment. Slide the battery cover
back onto the Console. Note: When the batteries are
installed correctly, the fan will turn on for a moment.
8. ake sure that all parts of the elliptical exerciser are properly tightened. Cover the floor beneath the
elliptical exerciser to protect the floor from damage. Note: Some extra hardware may be left over.
The elliptical exerciser is now fully assembled. If you have purchased the optional chest pulse sensor
(see page 18), see page 7.
6
17
Batteries
Battery
Cover
5
12
Face
Lube
7. Remove the ground wire screw from the Upright (2).
Attach the ground wire to the Upright with the ground
wire screw as shown.
Have another person hold the Console (17) near the
Upright (2). Connect the ground wire to the ground
wire on the Console. Connect the Upper Wire Harness
(30) to the wire harness on the Console. Connect the
two Pulse Wires (20) to the pulse wires on the
Console.
Carefully insert all excess wiring down into the Upright
(2). Attach the Console to the Upright with four M4 x
16mm Screws (94). (Note: The Screws may be found
in the console box.) Be careful to avoid pinching the
wires.
17
2
94
94
30
Do not pinch
the wires
during this step.
7
20
Ground Wire Screw
Ground
Wire
All manuals and user guides at all-guides.com
all-guides.com

7
INSTALLING THE RECEIVER FOR THE OPTIONAL CHEST PULSE SENSOR
If you have purchased the optional chest pulse sensor (see page 18), follow the steps below to install the
receiver included with the optional chest pulse sensor.
1. Look under the Console (17) and locate the access
cover. Remove the access cover.
2. Hold the receiver in the position shown, with the small
cylinder oriented as shown. Using the two screws
included with the chest pulse sensor, attach the receiv-
er to the two plastic posts (not shown) inside the
access opening in the back of the Console (17).
3. Connect the wire on the receiver to the indicated wire
on the Console (17). ake sure that the connectors
on the wires snap together. Discard the other wires
included with the chest pulse sensor.
4. Reattach the access cover to the Console (17).
EXERCISING ON THE ELLIPTICAL EXERCISER
To mount the elliptical exerciser, hold the handgrip
pulse sensor and step onto the pedal that is in the
lowest position. Next, step onto the other pedal. Push
the pedals until they begin to move with a continuous
motion.
To dismount the elliptical exerciser, wait until the ped-
als come to a complete stop. The elliptical exercis-
er does not have a free wheel; the pedals will
continue to move until the flywheel stops. When
the pedals are stationary, step off the highest pedal
first. Then, step off the lowest pedal.
Screws
17
Cylinder
Receiver
Access Cover
HOW TO USE THE ELLIPTICAL EXERCISER
Pedals
Handgrip
Pulse Sensor
All manuals and user guides at all-guides.com

8
FEATURES OF THE CONSOLE
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the resistance of the elliptical exerciser can
be changed with the touch of a button. As you exer-
cise, the console will provide continuous exercise
feedback. ou can even measure your heart rate using
the handgrip pulse sensor. Note: For information about
an optional chest pulse sensor, see page 18.
The console also offers six resistance and pace pro-
grams. Each program automatically changes the resis-
tance of the elliptical exerciser and prompts you to
increase or decrease your pace as it guides you
through an effective workout.
In addition, the console features two heart rate pro-
grams that automatically change the resistance of the
elliptical exerciser and prompt you to vary your pace to
keep your heart rate near a target heart rate as you
exercise.
The console also features iFIT.com interactive technol-
ogy. Having iFIT.com technology is like having a per-
sonal trainer in your home. Using the included audio
cable, you can connect the elliptical exerciser to your
home stereo, portable stereo, computer, or VCR and
play special iFIT.com CD and video programs (iFIT.com
CDs and videocassettes are available separately).
iFIT.com CD and video programs automatically control
the resistance of the elliptical exerciser and prompt
you to vary your pace as a personal trainer coaches
you through every step of your workout. High-energy
music provides added motivation. To purchase
iFIT.com CDs and videocassettes, call toll-free
1-800-735-0768.
With the elliptical exerciser connected to your comput-
er, you can also go to our Web site at www.iFIT.com
and access programs directly from the internet.
Explore www.iFIT.com for more information.
CONSOLE DIAGRA
Note: If there is a sheet of clear plastic on the face of the console, remove it before using the console.
Matrix Training Zone Bar
Left Display
All manuals and user guides at all-guides.com

9
HOW TO USE THE ANUAL ODE
Press any button on the console or begin
pedaling to turn on the console.
Note: The console requires four 1.5V “D” batteries
(see assembly step 6 on page 6).
Press any button on the console or begin pedal-
ing to turn on the console. After a few seconds,
the console displays will light, a tone sound, and
the console will be ready for use.
Select the manual mode.
When the power is
turned on, the manual
mode will be select-
ed. If you have
selected a program or
the iFIT.com mode,
reselect the manual
mode by pressing the Program Select button
repeatedly until a track appears in the matrix.
Begin pedaling and change the resistance of
the elliptical exerciser as desired.
As you pedal, change
the resistance of the
elliptical exerciser by
pressing the Resis-
tance buttons. There
are ten resistance
levels. Note: After the
Resistance buttons are pressed, it will take a
moment for the elliptical exerciser to reach the
selected resistance level.
onitor your progress with the matrix, the
Training Zone bar, and the two displays.
The matrix—When
the manual mode is
selected, the matrix
will show a track rep-
resenting 1/4 mile. As
you pedal, the indica-
tors around the track will light in succession until
the entire track is lit. The track will then darken
and the indicators will again begin to light in suc-
cession.
The Training
Zone bar—The
Training Zone bar
will show your pace
and the approxi-
mate intensity level
of your exercise.
For example, if three or four indicators in the bar
are lit, the bar shows that your pace is ideal for fat
burning. During programs, the Training Zone bar
will also prompt you to increase or decrease your
pace.
The left display—
The left display will
show the elapsed
time, your pedaling
speed (in revolutions
per minute), and the
total number of revolu-
tions you have ped-
aled. The display will change from one number to
the next every few seconds, as shown by the
mode indicators in the display. Note: When a pro-
gram is selected, the display will show the time
remaining in the program instead of the elapsed
time.
The right display—
The right display will
show the approximate
numbers of fat calo-
ries and calories you
have burned (see FAT
BURNING on page
20) and the resistance level of the elliptical exer-
ciser. The display will change from one number to
the next every few seconds, as shown by the
mode indicators. The display will also show your
heart rate when you use the handgrip pulse sen-
sor or the optional chest pulse sensor. Note: Each
time the resistance of the elliptical exerciser
changes, the display will show the resistance
level.
4
3
2
1
Mode Indicator
All manuals and user guides at all-guides.com

10
easure your heart rate if desired.
Note: If you wear the optional chest pulse
sensor and hold the handgrip pulse sensor at
the same time, the console may not display
your heart rate accurately.
If there are
thin sheets of
plastic on the
metal con-
tacts on the
handgrip
pulse sensor,
peel off the
plastic. To
measure your
heart rate,
hold the con-
tacts; your palms must be resting on the upper
contacts, and your fingers must be touching the
lower contacts. Avoid moving your hands.
When your pulse is detected, the heart-shaped
indicator in the right display will flash each time
your heart beats, one or two dashes (– –) will
appear, and then your heart rate will be shown.
For the most accurate heart rate reading, hold the
contacts for at least 15 seconds.
Note: If you continue to hold the pulse sensor,
the right display will show your heart rate for up
to 30 seconds. The display will then show your
heart rate along with the other modes.
If your heart rate is not shown, make sure that
your hands are positioned as described. Be care-
ful not to move your hands excessively or to
squeeze the metal contacts too tightly. For opti-
mal performance, clean the metal contacts using
a soft cloth; never use alcohol, abrasives, or
chemicals.
Turn on the fan if desired.
To turn on the fan at low speed, press the Fan
button. Pivot the fan to the desired angle. To turn
on the fan at high speed, press the Fan button a
second time. To turn off the fan, press the Fan
button a third time. Note: If the pedals are not
moved for about thirty seconds, the fan will auto-
matically turn off.
When you are finished exercising, the console
will automatically turn off.
If the pedals are not moved for several seconds, a
tone will sound, the console will pause, and the
left display will begin to flash. If the pedals are not
moved for about five minutes, the console will
turn off and the displays will be reset.
7
6
5
Contacts
All manuals and user guides at all-guides.com

11
HOW TO USE RESISTANCE AND PACE
PROGRA S
Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 9.
Select one of the six resistance and pace
programs.
When the power is
turned on, the man-
ual mode will be
selected. To select a
resistance and pace
program, press the
Program Select but-
ton repeatedly until a “P 1,” “P 2,” “P 3,” “P 4,”
“P 5,” or “P 6” appears in the right display.
Each program is divided into several time seg-
ments of different lengths. One resistance setting
and one pace setting are programmed for each
segment. (Note: The same resistance setting
and/or pace setting may be programmed for two or
more consecutive segments.) The resistance set-
ting for the first seg-
ment is shown in the
left column of the
matrix. The resis-
tance settings for
the next five seg-
ments are shown in
the columns to the
right. Note: One bar
in a column represents a resistance setting of
level 1, two bars represent level 2 or 3, three
bars represent level 4 or 5, four bars represent
level 6 or 7, five bars represent level 8 or 9, and
six bars represent level 10.
Press the Program Start button or begin
pedaling to start the program.
When the program is started, the left column of
the matrix will begin to flash, and the elliptical
exerciser will automatically adjust to the resis-
tance setting for the first segment.
As you exercise, the Training Zone bar will help
you to keep your pedaling pace near the pace
setting for the cur-
rent segment. The
lit indicators in the
bar will show your
actual pace. If an
indicator to the
right of the lit indi-
cators is flashing
(see drawing a),
increase your
pace. If an indica-
tor to the left of
any lit indicator is
flashing (see draw-
ing b), decrease your pace. When no indicator is
flashing, your pace matches the pace setting for
the current segment. Important: The pace set-
tings are intended only to provide motivation.
Your actual pace may be slower than the cur-
rent pace setting. ake sure to exercise at a
pace that is comfortable for you.
When the first segment of the program ends, a
series of tones will sound and all resistance set-
tings will move one column to the left. The resis-
tance setting for the second segment will then be
shown in the left column of the matrix and the
resistance of the elliptical exerciser will automati-
cally change to the resistance setting for the sec-
ond segment.
Note: During the program, you can override the
resistance setting, if desired, by pressing the
Resistance buttons. However, when the next
segment begins, the resistance will change if a
different resistance setting is programmed for the
next segment.
If you stop pedaling for several seconds, a tone
will sound and the program will pause. To restart
the program, simply resume pedaling. The pro-
gram will continue until the resistance setting for
the last segment is shown in the left column of
the matrix and the last segment ends.
onitor your progress with the two displays.
See step 4 on page 9.
easure your heart rate if desired.
See step 5 on page 10.
5
4
3
2
1
Current Segment
a
b
All manuals and user guides at all-guides.com
all-guides.com

12
Turn on the fan if desired.
See step 6 on page 10.
When the program is finished, the console
will automatically turn off.
See step 7 on page 10.
HOW TO USE HEART RATE PROGRA S
Each heart rate program helps you to keep your heart
rate near a certain percentage of your maximum heart
rate during your workout. ( our maximum heart rate is
estimated by subtracting your age from 220. For
example, if you are 30 years old, your maximum heart
rate is 190.) Heart rate program 1 is designed to keep
your heart rate between 50% and 80% of your maxi-
mum heart rate while you exercise; heart rate pro-
gram 2 is designed to keep your heart rate between
50% and 85% of your maximum heart rate.
Follow the steps below to use a heart rate program.
Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 9.
Select one of the heart rate programs.
When the power is
turned on, the manu-
al mode will be
selected. To select a
heart rate program,
press the Program
Select button repeat-
edly until an “H 1” or “H 2” appears in the right
display.
During heart rate pro-
grams, the matrix will
show a moving
graphic that repre-
sents your heart rate.
Each time a heart-
beat is detected, an
additional peak will appear.
Enter your age.
When a heart rate
program is selected,
the word “AGE” and
the current age set-
ting will flash in the
left display. ou must
enter your age to use
a heart rate program. If you have already entered
your age, press the Enter button and go to step
4. If you have not entered your age, press the +
or – button repeatedly to enter your age, and
then press the Enter button. Once you have
entered your age, it will be saved in memory.
Hold the handgrip pulse sensor.
To use a heart rate program, you must use the
handgrip pulse sensor (see step 5 on page 10)
or the optional chest pulse sensor. If you use the
handgrip pulse sensor, it is not necessary to hold
the handgrips continuously during the program.
However, you should hold the handgrips fre-
quently for the program to operate properly. Each
time you hold the handgrips, keep your hands
on the metal contacts for at least 30 seconds.
Note: When you are not holding the handgrips,
the letters “PLS” will appear in the right display
instead of your heart rate.
Press the Program Start button or begin
pedaling to start the program.
When the program is started, the elliptical exer-
ciser will automatically adjust to the resistance
setting for the first segment.
Each program is divided into 20 one-minute seg-
ments. One resistance setting and one target
heart rate setting are programmed for each seg-
ment. Note: The same resistance setting and/or
target heart rate setting may be programmed for
two or more consecutive segments.
During the last three seconds of each segment, a
series of tones will sound. The resistance of the
elliptical exerciser will then automatically change if
a different resistance setting is programmed for
the next segment.
As you exercise, the Training Zone bar will help
you to keep your heart rate near the target heart
5
4
3
2
1
7
6
All manuals and user guides at all-guides.com

13
rate setting for the
current segment.
The lit indicators
in the bar will
show your actual
pace. When you
hold the handgrip
pulse sensor or
wear the optional
chest pulse sen-
sor, the console
will periodically
compare your
heart rate to the
target heart rate setting for the current segment;
if necessary, an indicator in the bar will then flash
to prompt you to increase or decrease your pace
to bring your heart rate closer to the target heart
rate setting. If an indicator to the right of the lit
indicators is flashing (see drawing a), increase
your pace. If an indicator to the left of any lit indi-
cator is flashing (see drawing b), decrease your
pace. When no indicator is flashing, your heart
rate is near the target heart rate setting.
Important: The target heart rate settings are
intended only to provide motivation. Your
actual heart rate may be slower than the tar-
get heart rate settings. ake sure to exercise
at a pace that is comfortable for you.
Note: During the program, you can override the
resistance setting, if desired, by pressing the
Resistance buttons. However, when the next
segment begins, the resistance will change if a
different resistance setting is programmed for the
next segment.
The program will continue until the last segment
ends.
If you stop pedaling for several seconds, a tone
will sound and the program will end. Heart rate
programs cannot be stopped temporarily and
then restarted.
onitor your progress with the two displays.
See step 4 on page 9.
Turn on the fan if desired.
See step 6 on page 10.
When the program is finished, the console
will automatically turn off.
See step 7 on page 10.
8
7
6
a
b
All manuals and user guides at all-guides.com

14
HOW TO CONNECT YOUR CD PLAYER, VCR,
OR CO PUTER
To use iFIT.com CDs, the elliptical exerciser must be
connected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
14 and 15 for connecting instructions. To use iFIT.com
videocassettes, the elliptical exerciser must be con-
nected to your VCR. See page 16 for connecting
instructions. To use iFIT.com programs directly from
our Web site, the elliptical exerciser must be connect-
ed to your home computer. See page 15 for connect-
ing instructions.
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your CD player.
Plug your headphones into the PHONES jack.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into a 1/8” -adapter (available at electronics
stores). Plug the -adapter into the PHONES jack
on your CD player. Plug your headphones into the
other side of the -adapter.
HOW TO CONNECT YOUR PORTABLE STEREO
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
1/8” LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the cable
into the adapter. Plug the adapter into an AUDIO
OUT jack on your stereo.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your stereo. Do
not use the adapter.
C. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into a 1/8” -adapter (available at electronics
stores). Plug the -adapter into the PHONES jack
on your stereo. Plug your headphones into the
other side of the -adapter.
LINE OUT
PHONES LINE OUT
PHONES
Audio
Cable Head-
phones
A
PHONES
PHONES
Audio
Cable
1/8”
-adapter
Headphones
B
AUDIO OUT
RIGHT
LEFT
PHONES
Audio
Cable
C
1/8”
-adapter
Headphones
Audio Cable Adapter
A, B
All manuals and user guides at all-guides.com

15
HOW TO CONNECT YOUR HO E STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into the
LINE OUT jack on your stereo.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into an
RCA -adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the
wire into the unused side of the -adapter. Plug the
-adapter into the LINE OUT jack on your stereo.
HOW TO CONNECT YOUR CO PUTER
Note: If your computer has a 1/8” LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into a 1/8” -adapter (available at electronics
stores). Plug the -adapter into the PHONES jack
on your computer. Plug your headphones or speak-
ers into the other side of the -adapter.
CD
VCR
Amp
LINE OUT
LINE OUT
Audio
Cable Adapter
A
CD
VCR
Amp
LINE OUT
Audio
Cable
RCA
-adapter
Wire removed from
LINE OUT jack
B
Adapter
LINE OUT
Audio
Cable
A
PHONES
Audio
Cable
B
1/8”
-adapter
Headphones/Speakers
All manuals and user guides at all-guides.com

16
HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HO E STEREO on page 15.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into the
AUDIO OUT jack on your VCR.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into an
RCA -adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the AUDIO OUT jack on your VCR and plug the
wire into the unused side of the -adapter. Plug the
-adapter into the AUDIO OUT jack on your VCR.
AUDIO OUT
RIGHT
LEFT
VIDEO AUDIO
ANT. IN
RF OUT
IN
OUT
CH
34
Audio Cable
Adapter
A
VIDEO AUDIO
ANT. IN
RF OUT
IN
OUT
CH
34
Audio Cable Adapter
B
Wire removed from
AUDIO OUT jack
RCA -adapter
All manuals and user guides at all-guides.com
all-guides.com

17
To use iFIT.com CDs or videocassettes, the elliptical
exerciser must be connected to your portable CD play-
er, portable stereo, home stereo, computer with CD
player, or VCR. See HOW TO CONNECT OUR CD
PLA ER, VCR, OR COMPUTER on page 14. To pur-
chase iFIT.com CDs and videocassettes, call toll-
free 1-800-735-0768.
Follow the steps below to use an iFIT.com CD or
video program.
Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 9.
Select the iFIT.com mode.
When the console is
turned on, the manu-
al mode will be
selected. To select
the iFIT.com mode,
press the iFIT.com
button. The indicator
above the button will light.
Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
Press the play button on your CD player or
VCR.
A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions.
The program will function in almost the same way
as a resistance and pace program (see step 3 on
page 11). However, an electronic “chirping” sound
will alert you when the resistance setting and/or
the pace setting is about to change.
Note: If the resistance of the elliptical exerciser
and/or the pace setting does not change when
a “chirp” is heard:
• ake sure that the indicator above the
iFIT.com button is lit.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
• ake sure that the audio cable is properly
connected and that it is fully plugged in.
onitor your progress with the two displays.
See step 4 on page 9.
easure your heart rate if desired.
See step 5 on page 10.
Turn on the fan if desired.
See step 6 on page 10.
When the program is finished, the console
will automatically turn off.
See step 7 on page 10.
8
7
6
5
4
3
2
1
HOW TO USE IFIT.CO CD AND VIDEO
PROGRA S
All manuals and user guides at all-guides.com

18
HOW TO USE PROGRA S DIRECTLY FRO
OUR WEB SITE
Our Web site at www.iFIT.com allows you to play
iFIT.com audio and video programs directly from the
internet. To use programs from our Web site, the ellip-
tical exerciser must be connected to your home com-
puter. See HOW TO CONNECT OUR COMPUTER
on page 15. In addition, you must have an internet
connection and an internet service provider. A list of
specific system requirements is found on our Web
site.
Follow the steps below to use a program from our
Web site.
Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 9.
Select the iFIT.com mode.
When the console is
turned on, the manu-
al mode will be
selected. To select
the iFIT.com mode,
press the iFIT.com
button. The indicator
above the button will light.
Go to your computer and start an internet
connection.
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
Follow the desired links on our Web site to
select a program.
Read and follow the on-line instructions for using
a program.
Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
Return to the elliptical exerciser and begin
pedaling.
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a resistance and pace
program (see step 3 on page 14). However, an
electronic “chirping” sound will alert you when the
resistance setting and/or the pace setting is about
to change.
onitor your progress with the two displays.
See step 4 on page 9.
easure your heart rate if desired.
See step 5 on page 10.
Turn on the fan if desired.
See step 6 on page 10.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 10.
THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor provides hands-free
operation and continuously monitors your heart rate
during your workouts. To purchase the optional
chest pulse sensor, call toll-free 1-800-734-2377.
11
10
9
8
7
6
5
4
3
2
1
All manuals and user guides at all-guides.com

19
Inspect and properly tighten all parts of the elliptical
exerciser regularly. Replace any worn parts immedi-
ately.
PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function proper-
ly, see step 5 on page 10.
CONSOLE TROUBLESHOOTING
If turning on the fan resets the console displays, or if
the displays becomes dim, the batteries should be
replaced. Most console problems are the result of low
batteries. See assembly step 6 on page 6 for replace-
ment instructions.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical
exerciser rocks
during use,
turn one or
both of the lev-
eling feet
under the rear
stabilizer until
the rocking
motion is elimi-
nated.
HOW TO OVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han-
dlebars firmly, and place one foot against one of the
wheels. Pull the handlebars until the elliptical exercis-
er can be moved on the wheels, and carefully move
the elliptical exerciser to the desired location. Then,
place one foot against a wheel, and lower the elliptical
exerciser. Due to the size and weight of the ellipti-
cal exerciser, use extreme caution while moving
and lowering it.
AINTENANCE AND TROUBLESHOOTING
Leveling
Foot
Handlebars
Wheel
All manuals and user guides at all-guides.com

20
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers are your “training
zone.” The lower two numbers are recommended
heart rates for fat burning; the highest number is the
recommended heart rate for aerobic exercise.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber in your training zone as you exercise.
For maximum fat burning, adjust the intensity of your
exercise until your heart rate is near the middle num-
ber in your training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone as you exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise
program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each week
if desired. The key to success is to make exercise a
regular and enjoyable part of your everyday life.
WARNING:
Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for persons over the age of 35
or persons with pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
All manuals and user guides at all-guides.com