NOUVOLED SOLAR PRO 300ZB TW User manual

SOLAR PRO 300ZB TW/CW
300W LED 25-50°zoom profile light
USER MANUAL
• Package and accessories •
1. 300W LED zoom profile light 25-50°
2. 3 pin signal connector 1 pair
3. Power plug 1 pair
• Functions •
◆Input voltage 100-240V 50-60HZ
◆Power consumption 300W
◆Manual zoom
◆Zooming scale: 25-50°
◆DMX dim or manual button dim
◆16 bit above no flicker linear dimming
◆Inner size: 76×28.5×28.5cm
◆Packing size: 89×30.5×31.5cm
◆G.W.: 14kg
◆N.W.: 16kg
• Keys instruction •
→Confirm →Function →Decrease →Increase
◆Press Function key display different functions cyclically .
◆Press decrease key and increase key to adjust each
function’s value.
◆Press confirm key to confirm the function and value .
• Screen display and its function •
No.
Screen
Function instruction
1
DMX-ADR
001 V
Already connect with DMX wire. press “ ”and “ ” keys can adjust address.
2
DMX-ADR
001 X
not connect with DMX wire. Can set master/slave connected, press “ ” key or “ ” key can adjust address you
want.
3
ADJ-CW
255
Enter manual button dim mode press “ ” key and “ ”key to dim
Special remind: when the multi units power cable mutual
input / output connected, each group can connect10
units, power cable must use 3 × 2.5 ² grounding.

4
DMX SING
OFF/ON
Prior for DMX, press ”or “ ” choose the function DMX SING ON/OFF, and ten press to save/confirm the
function
5
DMX KEEP
OFF/ON
for DMX keep/off, press ”or “ ” choose the function you want, and ten press to save/confirm the function
• DMX channels functions •
Only 1 DMX channel 0-255 dim
• Master/slave connect introduce •
Set all units address same as “001”, off DMX signal, can set any unit as master, set functions on the master
unit by the Function key all units are synchronal