NOUVOLED BLINDER 200 RGBW User manual

BLINDER 200 RGBW
USER MANUAL
2X100W COB RGBW LED

1) Display board operating instructions
After powering on, press the menu key (MENU key) to switch the menu, press
the up key (UP) or the down key (DOWN) to select the setting value, after setting,
press the confirm key (ENTER) to save, and the display will flash once to indicate that
the data is save.
2) Menu function
After powering on, press the menu button (MENU button) to display the following functions
in sequence, and then press the confirm button to confirm. (This sequence is the sequence of the
new machine. If the lamp has used other modes and saved the mode before shutting down, the
mode before the last shutdown will be displayed after the lamp is turned on again. After setting
other functions, you also need to press the save button to save, otherwise the next time you turn it
on After that, the effect of the settings before shutting down will not appear
A001
A512
8CH
d001
F512
8CH
FF00
FF99
Color Gradual change（FF00-FF99）， press (ENTER key)
EE00
EE99
Color pulse change（EE00-EE99）， press (ENTER key)
CC00
CC99
Color jump change（CC00-CC99）， press (ENTER key)
Soud
Soud
Sound voice
R001
r255
Red dimmer
G001
G255
Green dimmer
B001
B255
Blue dimmer
W001
W255
White dimmer
S-01
S-99
IR remote （UP）/（DOWN）, Choose remote light fixture quantity（S-01-S-99）, press
enter save.Max 90QTY
Id01
ID99
IR remtoe ID address,press（UP）/（DOWN）,（ID01-ID99）range to choose ID address
press enter key to save
SW-0
SW-1
press（UP）/（DOWN）choose remote on/off (SW-0 off/SW-1 on), press enter key to
save
remark：remote control is future develop function

3) A001 and d001 DMX channel list
A001
8ch
index
function
1
000-255
Dimmer
2
000-255
0-9 non strobe
10-255 strobe
3
000-255
Mode effect
4
000-255
Mode effect speed
5
000-255
Red dimmer
6
000-255
Green dimmer
7
000-255
Blue dimmer
8
000-255
White dimmer
D001
8CH
Index
Function
1
000-255
Dimmer
2
000-255
Red dimmer
3
000-255
Green dimmer
4
000-255
Blue dimmer
5
000-255
White dimmer
6
000-255
0-9 non strobe
10-255strobe
7
000-255
Mode effect
8
000-255
Mode effect speed

4) FUNCTIONS
1,DMX512 control, after power on, set the digital display board to A001 or d001, then connect the control console to the lamp
with a signal line, and the par light digital display board with 512 signal will not flicker (if the digital display board continues to
flicker, it means The LED lamp does not receive the 512 signal, please check the lamp, signal line, and the console where there is a
problem), as long as the address code is set correctly, you can use the 512 console to control the LED lamp.
2, FF00 (gradual change mode), EE00 (pulse change mode), CC00 (jump mode), Soud (sound control mode), as long as you use
the menu to call up, press the confirm button to use the related functions。
Master and slave settings
Two or more of the same lamps are connected with a 3-core signal line, and any one of the main units is set to voice control or
gradual change, pulse change, jump change, and the other lamps are in A001 or d001 mode, then enter the master-slave mode and
slave The display of the machine does not flicker (flashing means that the machine does not receive a signal, and the connection
line must be checked)
Special attention: Only one host can be set in a group of lamps. If there are more than one host, all the lamps will flash randomly
and synchronously