NRS Healthcare M99394 User manual

M12345
M99394
Adjustable Curved Over Bed/Chair Table
User Instructions
General Safety Warning
Please ensure these instructions
are fully read and implemented.
Failure to do so may result in
injury to the user. Retain in a safe
place for future reference.
Intended Use
This stylish and versatile table can
be used either over chairs or single
beds. It has four lockable castors
which makes manoeuvring and
positioning the table very easy. It is
height and width adjustable.
Height:
700mm (27½") to 900mm (35½")
Width:
900mm (35½") to 1100mm (43¼").
Unpacking
·This product is supplied flat
packed and requires assembly
before use.
·No tools are required.
·Remove the product from its
packaging; Check for damage. If
you see any, or suspect a fault,
do not assemble the product;
contact your supplier
immediately.
·Check all parts are present - see
contents list overleaf
NRS Healthcare
Sherwood House, Cartwright Way
Forest Business Park, Bardon Hill
Coalville, Leicestershire. LE67 1UB UK
Tel: [phone] Fax: [phone]
Email: [e-mail]
www.nrs-uk.co.uk
The Adjustable Curved Over Bed/Chair Table and Dycem Non-Slip Mats
are from a range of over 3000 daily living aids available from
NRS Healthcare.To view the full range please visit our website:
www.nrs-uk.co.uk. Or request a catalogue from the number below
IMPORTANT
For information on how to obtain the User Instructions in other
languages and formats for use by people with visual, reading or
cognitive impairments, please contact:
[e-mail] or telephone [phone].
Additional copies of this user instruction are available on our website:
www.nrs-uk.co.uk.
UI/M99394/01/14/Iss1
Other products in the NRS Healthcare range you may find useful when
using this product:
L35324:
Dycem Non
-
Slip Mat

Contents
Description
Qty
Table Top Assembly 1
Adjustment Angle 2
Hand wheel (Locking Screw) 4
Leg Assembly 2
Safety Precautions
·Do not overload the table top -
Max 15kg when.
·Do not use the table to transport
objects
·It is advised to lock the castors
before using the table.
Product Care: Cleaning
·Clean regularly, wiping down
with a soft cloth and a mild
detergent/disinfectant solution
·Do not use abrasive cleaners
Product Care: Maintenance
·Inspect on a regular basis the
stability and rigidity of the
product, check all screws are
tightened and in good condition
Assembly Instructions
1. Place the table top assembly on
the floor, face down - see
diagram 1
2. Slide the shorter leg of the
adjustment angle into the table
top centre bar, to the required
width, align the holes in the two
parts and secure with hand
wheel - see diagram 1
3. Repeat step two for the other
side see diagram 2
4. Fit the leg assembly onto the
Adjustment Angle, slide to the
correct height. Align the holes
and secure with hand wheel -
see diagram 3
5. Repeat step four, for the other
leg, see diagram 4
Diagram:1
Diagram:2
Di
agram:3
Diagram:4
Hand Wheel
Adjustment Angle
Leg Assembly
Hand Wheel