NRS EasyFit Plus+ User manual

Product Range
P11849 EasyFit Plus+ Bedrail (Standard Handle)
P11838 EasyFit Plus+ Bedrail (Tall Handle)
Product Technical Data Sheet 052
EasyFit Plus+ Bedrail
Product Descripon & Intended Purpose
The EasyFit Plus + Bedrail provides a stable support for users when geng into and out of bed. The
ergonomic handle also provides assistance when reposioning in bed. It is designed for use on all
convenonal bed types, from single to king size.
Product Features
 Ergonomic handrail with mulple hand hold posions.
 Two handle heights available to suit a full range of users.
 Simple two step assembly.
 Innovave adjustment clamps allow quick installaon.
 Fits most domesc bed types of all sizes.
 UK Patent applied for.

PTDS052
EasyFit Plus+ Bedrail
Technical Specicaon
Symbol Descripon Dimension
OW Overall Width 522mm ( 20 1/2“)
OL Overall Length 712mm (28”)
OHS Overall Height Standard 820mm (32 1/4“)
OHT Overall Height Tall 920mm (36 1/4“)
HW Handrail Width 285mm (11 1/4“)
TBS Top Bar Height Standard 692mm (36 1/4“)
TBT Top Bar Height Tall 792mm (27 1/4“)
CH Clamp Height Min Min: 30mm (1 1/5“) Max:330mm (13“)
BW Base Width 301mm (11 7/8“)
BD Base Depth 180mm (7“)
BH Base Tube Height 29mm (1 1/8“)
- Max User Weight 25st ( 160kg)
Installaon Informaon: (Note: for detailed informaon refer to User Instrucons)
 Push the handrail onto the base.
 Posion the bedrail in the desired locaon at the side of the bed, slide the clamps up unl they
contact the underside of the bed frame and lock in posion.
 Turn the ratchet lever to provide the nal ghtening acon to ensure the clamps are ght
underneath the bed frame.

PTDS052
EasyFit Plus+ Bedrail
Product Supplied By:
NRS Healthcare Sherwood House, Cartwright Way, Forest Business Park, Bardon Hill, Coalville,
Leicestershire. LE67 1UB UK
PTDS052/Iss1/01/18
Maintenance
 Periodically check the bedrail is secure and the clamps are ght underneath the bed frame.
 Inspect the product regularly for signs of general wear or damage. Any suspected faults or damage
should immediately be reported to the supplier and the product taken out of use.
Cleaning
 Clean regularly using a general purpose, neutral detergent and warm water.
 Please check the suitability of the cleaning products before use. Do not use abrasive cleaners or cloths
as these could permanently damage the surface and invalidate any warranty.
 To disinfect, wipe with a dilute bleach soluon and rinse thoroughly with fresh water.
 Always allow the product to dry thoroughly prior to use or storage.
Safety Precauons
 To avoid possible head entrapment, posion the Bedrail at least 320mm (12.5”) away from both
headboard and footboard.
 Always ensure the Bedrail is rmly clamped to the bed frame.
 Always ensure the maress is as close to the Bedrail as possible.
 Do not exceed the maximum user weight 25st, 160kg.
 Not suitable for use by children.
 Detach the handle from the base before carrying or storing.
 Do not use on electrically height adjustable beds unless the height adjustment funcon has been
disabled.
Spares:
 P11851: Replacement Clamp Kit
 P11863: Spare Parts Kit (Ratchet Lever, Base Feet (x4), Tube End Caps (x2), ‘O’ Rings (x4))
FAQ’s
 How do I choose which height Bedrail is most appropriate for me?
Measure from the oor to the top of your maress. If this measurement is less than 600mm
use the standard height Bed Rail (P11849). If greater than 600mm choose the tall Bed Rail (P11838).