NRS Mowbray G44869 User manual

Mowbray
Toilet Seat
&
Frame
Range
Intended Purpose
The Mowbray toilet frame and seat range is designed
to assist those who have difficulty in lowering onto or
rising from a standard toilet. The plastic moulded seat
offers support in a natural position and the frame is
height and width* adjustable.
(*Only available with M11089 –Mowbray width
adjustable version)
Specification
One piece moulded plastic seat.
White epoxy coated frame.
Non-slip ferrules (free standing versions)
Fitting Instructions
The free standing versions of the Mowbray are
delivered ready assembled.
1. Remove the moulded seat from its polythene bag
and snap into place on the cross members of the
frame.
2. Ensure the seat is firmly in place and secure at
both back and front.
3. Adjust to the required height by removing each ‘E’
clip in turn.
4. Slide each leg up or down to the required height.
Align the holes in and replace ‘E’clip.
5. The back legs can be set at a slightly higher
position than the front to help with ease of
transfer. (Height difference should not be more
than 2 holes)
6. Ensure that the two front legs are set at the same
height and the two back legs at the same height
position in order to prevent rocking.
General Safety Warning
Please ensure these instructions are fully read
and understood before installation/ use. Retain
these instructions in a safe place for future
reference.
G44869 - Mowbray Toilet Seat & Frame (Free Standing)
L66242 - Mowbray Toilet Seat & Frame Floor Fixed
M11089 - Mowbray Width Adjustable (Free Standing)
M92739 - Mowbray Toilet Seat & Frame 510 (Free Standing)
7. Mowbray Width Adjustable only. (M11089). To
adjust the width, remove ‘E’clip either side of
the seat and slide tubes to obtain the desired
width (ensuring equivalent holes are used on
each side of the seat so that the frame
remains square. Replace ‘E’clips.
8. Place the Mowbray over the toilet with the
cutaway of the seat at the front and the
integral splash guard placed centrally over the
toilet bowl.
9. When not in use Mowbray’s can be stacked
with the seat in situ. It is recommended that no
more than five frames are stacked together for
long term storage
User Instructions
Maximum
User
Weight

00
IMPORTANT
For information on how to obtain the User
Instructions in other languages and formats for use
by people with visual, reading or cognitive
impairments, please contact: [e-mail]
or telephone [phone].
Additional copies of this user instruction are
available on our website:www.nrs-uk.co.uk.
NRS Healthcare
Sherwood House, Cartwright Way,
Forest Business Park, Bardon Hill,
Coalville, Leicestershire.
LE67 1UB UK
Tel. Main Office: 0330 100 00 98
Tel. Customer Services: 0845 120 4522
Email: [e-mail]
These products are from a range of over 3000
daily living aids available from NRS Healthcare.
To view the full range visit :
www.nrs-uk.co.uk or request a catalogue from
the above number.
www.nrs
-
uk.co.uk
UI/G44869/L66242/M11089/M92739/09/13/Iss5
Fittin
g Instructions;
Floor Fixed Versions & Floor Fixing Kit
1. Adjust frame to desired height.
2. A total of 12 screws must be used to fix
the frame to the floor, using fixing
methods appropriate to the floor’s
construction.
Please Note: Height adjustment is not
possible once the legs are secured to the floor
Care and Use
1. The seat may be removed from the frame and
autoclaved on cycles up to 70ºC.
2. The frame may be cleaned using a non-
abrasive cream cleaner or detergent solution.
3. Check the ferrules on the freestanding
versions monthly for signs of wear.
4. Check floor fixing screws weekly.
5. Check E clips every 2 months.
6. Maximum user weight is 190kg (30st).
Floor Fixing
Leg
Fixing Screws
(Not Included)
E Clip
Location Hole
•
•
•
•
Spares & Accessories
F11572 Floor Fixing Kit (Set of 4)
F17938 Ferrule
G30615 Standard Seat