NRS Linton Plus Series User manual

User Instructions
Linton Plus Raised Toilet Seat Range
Maximum User Weight:
30st
190kg
Intended Use
The Linton Plus Raised Toilet Seat has a
contoured form that offers comfort as well as
support with a rear cutaway for the coccyx,
and a front cutaway allows easier personal
cleaning. It is simple to install and maintain. It
has a buffer fitted to the front skirt to reduce
“tipping” of the seat. The seat fits to a
standard toilet with plastic fixing brackets
provided.
Specifications:
Seat: Recyclable Polypropylene
Support Brackets: Nylon
Unpacking
Check all parts carefully before assembling
the product.
Do not assemble if any of the parts are
damaged.
Do not assemble if any of the parts in the
Contents list are missing.
General Safety Warning
Please ensure these instructions are fully
read and understood before installation/ use.
Retain these instructions in a safe place for
future reference.
Fitting Instructions
1 - Engage the support brackets into the slots on
the seat (See Diagram 1)
2 - Turn the hand wheel clockwise until the
threads engage. Do not tighten any further at
this stage.
Fitting to the Toilet bowl:
Note: Ensure the toilet to which the seat is being
fitted is safe and secure.
3 - Lift the existing toilet seat up.
M53163/M53564 - 50mm (2")
M53175/M53576 - 100mm (4")
Page 1
Seat
Hand
Wheel
Support
Bracket
CONTENTS LIST
Item Description Qty.
1 Linton Plus Raised Toilet Seat 1
2 Hand Wheel 2
3 “L” Shaped Support Bracket 2
Diagram 1

Cleaning Instructions
•Clean regularly, use a general purpose,
neutral detergent and warm water
•Please check the suitability of the product
before use. Do not use abrasive cleaners
as this will permanently damage the
surface and invalidate any warranty.
•Do not use any form of solvent as this will
damage the surface and weaken the
product and again invalidate any warranty.
•To disinfect, wipe with a mild chloride
disinfectant (solution of 1000 parts per
million.
•These seats may be autoclaved on
cleaning cycles up to 73°C
•Dry the seat thoroughly before use.
Disposal Instructions
• Appropriate hygiene standards should be
applied before disposal to reduce the risk
of infection.
•Materials used are essentially non
hazardous and can be disposed of
appropriately.
Manufactured for
Nottingham Rehab Supplies
Clinitron House,
Excelsior Road,
Ashby Park,
Ashby de la Zouch,
Leicestershire,
LE65 1JG
United Kingdom
Tel: [phone]
Int’l: [phone]
Fax: [phone]
Email: [e-mail]
This product is from a range of over 3000 daily
living aids available from Nottingham Rehab
Supplies. To view the full range visit
www.nrs-uk.co.uk or request a catalogue
from the above number.
www.nrs
-
uk.co.uk
UI/M53163/M53175/M53564/M53576/11/11/Issue2
Fitting Instructions
–
Continued
4 - Lower the Linton Plus Toilet Seat onto the
toilet bowl, with the narrow cut-out at the front
and the brackets near the back ensuring the
front lip is outside of the bowl, and the seat is
evenly positioned about the bowl.
5 - To ensure the Linton seat is fitted correctly
to the bowl, tighten each support bracket by
turning both hand nuts simultaneously, an
equal amount, until the seat is secure.
Correct Use
•We recommend that you regularly check
your seat, ensuring that the hand wheels
are tight and the seat remains evenly
positioned on the bowl.
•If you suspect that the seat has moved out
of position, please follow the instructions
above to move it back into the correct
position and retighten all fitments.
•Do not under any circumstances stand on
the seat or allow others to do so as this is
highly dangerous and will compromise the
safety of the user.
•If you have to remove the Raised Toilet
Seat for any reason, please ensure that you
follow the installation instructions again fully
before using. Failure to do so could
compromise the safety of the user.
Safety Precautions
•Do not exceed the maximum user weight
limit of 30st (190kg)
•Inspect the Toilet Seat regularly to ensure it
is fitted correctly, is safe and secure, and fit
for use. If in any doubt, contact a
competent installer of sanitary equipment.
•Inspect at regular intervals for wear and
damage.
•Any undue signs of damage should be
noted and reported to the supplier in the
first instance. Should damage be evident,
then the user should refrain from using the
product until advice has been sought from
the supplier.
Page 2