NSA TF-31RC User manual

Compliance
For your safety, this appliance complies with the applicable standards and
regulations (Low Voltage Directive, Electromagnetic Compatibility, Environmental
directives) We reserve the right to make technical changes without prior notice
Recycling & Disposal
The packaging of your new fan has a recycle mark on it Please
dispose of it as recycled paper or by using the “Dual System”
The symbol on the product or on its packaging indicates that this product
may not be treated as general household waste Instead it should be handed over
to the applicable collection point for the recycling of electrical and electronic
equipment By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product For
more detailed information about the recycling of this product, please contact your
local council office, your household waste disposal service or the store where you
purchased the product
UK guarantee
12 months warranty valid only in respect of defects found to be due to faulty
workmanship or material Proof of purchase is required to validate the guarantee
This guarantee is no longer valid if the damage has been caused by a fall,
alteration or repair by any unauthorised persons or if the product has been resold
This guarantee in no way affects your statutory rights
Technical Data
Model No: TF-31RC
Rated Power: 40W
Voltage: 220-240V ~ 50Hz
Ref: IM/TF31/1606/GU86AA
Product Dims: 884 x 280 x 280 mm (H*W*D)
N W 4 15kg
G W 4 9kg
© 2016 Newton Stovold Assocs Ltd GU8 6AA
www nsauk com
Electronic Tower
Fan
w. LCD display & RC
Model TF-31RC
Instruction manual
(June 2016)
Electronic Fan with LCD
3 Speeds
8hr timer
Remote Control
Breeze & Sleep Modes
Oscillation
Carry Handle
88 4cm tall
Footprint 28cm dia
Self-assembly (no tools required)
Please eep safe for future reference
Please Recycle
8

Assembly Method
♦Please assemble correctly according to the following sequence
♦Please keep the original packaging for future storage
FIG. 1 FIG. 2
FIG. 3 FIG. 4
Fig 1 Assemble Base Plate
a Remove the butterfly screws from the base plate
b Insert the power lead between the front & back base plates
c Make sure the holes of front base correspond with the holes of rear base, Fig 1
d Click the two base plates firmly together as indicated
Fig 2 Fixing Base Plate to Fan
a Gently up-end the fan
b Guide the power cord from the front, along the groove towards the back of
the fan, clipping it under the lugs on the inside left of the oscillation pillar
Fig 3 c Arrange the base plate with the power cord hole at the back and align with
the notch on the oscillation plate
d Make sure the base plates are connected firmly with the butterfly screws
Fig 4 d Place the power cord into the clip slots of the base plate
e Carefully turn fan upright onto its base and plug into the mains supply
Safety Instructions
Thank you for purchasing this Tower Fan with LCD Screen, 8hr Timer and Remote
Control Please read this instruction manual before using your Tower Fan for the first
time Keep safe for future reference
CAUTION:
Use the fan only as described in this manual. Misuse may cause a fire or an electric shock.
1 Check the household voltage to
ensure it matches the fans rated
specification before using
2 Always check the device for visible
damage before use
3 Always use this devise in
accordance with the instructions
4 Close supervision is necessary when
this fan is used near children & pets
5 Do not allow children to play with
any product packaging, such as
plastic bags
6 This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety Children should be
supervised to ensure that they do
not play with the appliance
7 Repairs may only be carried out by
an authorised repair centre;
incorrect handling and faulty repairs
may lead to danger and invalidate
warranty
8 Arrange the power cord away from
an area where it may be tripped
over
9 Never position the fan in an area
where it may fall into a bath or
other water container
10 Never place the power cord
under a carpet or rug
11 This fan is not intended for use in
wet or damp locations or for
temperatures over 40°C
12 Do not use the equipment if it has
any damaged parts, or if it has
fallen into water Return the
product to a service centre for
examination and repair
13 Do not insert any object into the
grille whilst the fan is operating It
may cause damage to persons or
property
14 Do not operate the fan near an
open flame, cooking or heating
appliance or hot surface
15 Always use your fan on a firm, dry,
level surface away from curtains
and soft furnishings
16 Disconnect the unit from the
electrical outlet before cleaning,
moving or storing
17 To disconnect from the power
supply, switch off the power, grip
the plug and pull from the power
socket Never pull by the cord
18 This product has been designed
for domestic use only Any
commercial use, inappropriate
use or failure to comply with the
instructions, the manufacturer
accepts no responsibility and the
guarantee will not apply
3
2

Control Panel & Operation Guide
A. On/Off ~ Press once to turn on the unit and press again to turn
off For control panel diagrams, refer to Figs 10 & 11 on Page 7
B. Timer ~ You can set the run time for 1, 2, 4 or 8 hours duration
Press the Timer button to move through the timer options
The LCD display will indicate the time selected If there is no
number showing next to the clock symbol then the timer is off
and operation will be continuous until the fan is manually
powered off
C. Speed ~ Press to select Low, Medium and High fan speeds, press
the button until the red LED light indicates the desired speed
See Fig 7 for LCD display symbols
D. Modes ~ Press once to select Breeze mode (Speed Airflow
Variation), press a second time to select Sleep mode
(Speed Airflow Reduction), press again to turn off the mode
function Use in conjunction with the timer or oscillation
function More details on page 5 & LCD symbols in Fig 7
BREEZE MODE ~ AIRFLOW VARIATION
Random speed / breeze (96 sec cycles) +
SLEEP MODE ~ AIRFLOW REDUCTION
Speed steps down every 30 minutes
FIG. 5 FIG. 6
Operation Guide (cont’d)
BREEZE
D. Breeze Mode ~ Airflow Variation (Fig. 5):
This mode imitates the rhythms and tempo of a natural breeze
and will fluctuate at random speed cycles of c 96 secs
depending on the fan speed set Use in conjunction with the
1, 2, 4 or 8hr timer and oscillation function
Hi speed will cause the fan rhythms to be mostly High to Med
speed with occasional lulls of Low speed or no speed
Med speed will alternate mostly between Med, Lo and Stop with
occasional gusts of High speed
Low speed will fluctuate between Low, Med and stop with an
intermittent, short gust of high speed
SLEEP
D. Sleep Mode ~ Gradual Airflow Reduction (Fig. 6):
This mode will use the set fan speed and step down through the
speeds every 30 minutes ~ eg:
If High speed is selected, then the fan will start in High speed for 30
mins Then the fan speed will drop to Med speed for 30mins and
then drop to Low speed The fan will remain at Low speed
indefinitely until manually powered off or the set time is reached
When Med fan speed is selected, Sleep mode will start in Med
speed for 30 mins Then it will drop to Low speed where it will
remain indefinitely, unless the timer is set or the fan is manually
powered off
Select Sleep mode plus Low fan speed and the fan will remain at
this speed until the unit is manually powered off or the set time is
reached
E. Oscillation (OSC) ~ Press once to activate the oscillation feature,
for wide distribution of air Press OSC button again to stop
oscillation function
LCD Digital Display (Fig. 7)
W Breeze Mode ~ Airflow Variation
X Sleep Mode ~ Airflow Reduction
Y 3 Speeds (Low / Med / High)
Z 1, 2, 4, 8hr timer
FIG. 7
4
5

Accessory: Remote Control
The fan can be operated either manually by the control
panel on the fan unit itself or by the remote control supplied
with the product
♦Be sure to direct the remote control toward the receiver on
the control panel
♦Use the remote control within 6 metres from the receiver If
the remote control is not directed towards the receiver; the
effectiveness will be reduced
♦Do not place any obstacle between the receiver and remote control
♦Please treat your remote control with care Knocking or dropping will reduce its
reliability
♦Please store the remote control safety when not in use
♦Whenever a command is issued to the control panel, the fan beeps
How to install the battery of the Remote Control:
1 Open the cover of battery compartment according to the direction shown
2 Install the batteries (2xAAA) into the battery compartment Take care of the
polarity of each battery, which is indicated inside the compartment
3 Close the battery cover
NB Please dispose of used batteries responsibly
FIG. 8
Cleaning & Care
♦Unplug the appliance before cleaning
♦Do not use any chemical-based solutions for cleaning surfaces
♦Slightly moisten a cloth and then wipe off the surfaces of the fan
♦In order to remove the dust from the protective fan grille use a vacuum cleaner
upholstery attachment
♦Ensure fan is completely dry before storage or reconnecting to the electrical
supply
♦Never immerse the fan or fan motor in water or other liquid
♦If the fan is not used for long periods, protect with a suitable cover after
cleaning, then store in a dry place
♦Remove the batteries from the remote control before storage
Parts Description
FIG. 10 ~ Remote Control
A On / Off
B 8hr timer
C 3 Speeds (Low / Med / High)
D 2 Modes ~ Breeze (Variation) &
Sleep (Gradual Slow Down)
E Oscillation
FIG. 9 ~ Parts
1 Control Panel (top)
2 LCD Screen
3 Front Grille (Air outflow)
4 Oscillation Base w Non-slip feet
5 Back Panel (Air intake)
6 Carry handle FIG. 11 ~ Manual Controls
6
7
Table of contents
Other NSA Fan manuals