NSA SF-1616-MPC User manual

Cleaning & Care
♦Unplug the appliance before cleaning.
♦Do not use any water or chemical-based solutions for cleaning metal surfaces.
♦Slightly moisten a cloth and then wipe off the surfaces of the fan.
♦In order to remove the dust from the protective fan grille use a vacuum cleaner or
reverse the assembly instructions ~ undo safety screw, open securing clips on grille
edge and wipe fan blades with a damp cloth.
♦Ensure fan is completely dry and the fan grille securely refitted before storage or
reconnecting to electrical supply.
♦ever immerse the fan or fan motor in water or other liquid.
♦If the fan is not used for long periods, protect with a suitable cover after cleaning,
then store in a dry place.
This appliance complies with both the low voltage and electromagnetic compatibility
directives. Its construction complies with current safety standards. We reserve the right to
make technical changes without prior notice.
Disposal
The packaging of your new fan has a recycle mark on it. Please
dispose of it as recycled paper or by using the “Dual System”.
The symbol on the product or on its packaging indicates that this product may
not be treated as general household waste. Instead it should be handed over to the
applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information
about the recycling of this product, please contact your local council office, your
household waste disposal service, the store where you purchased the product or visit
www.recycle-more.co.uk.
UK guarantee
For 12 months warranty in respect of defects found to be due to faulty workmanship or
material. Proof of purchase is required for validity of the guarantee. This guarantee is no
longer valid if the damage has been caused by fall, alteration or repair by any
unauthorised persons. This guarantee in no way affects your statutory rights.
Technical Data
Model o: SF-1616-MPC
Power: 60W
Voltage: 220-240V ~ 50Hz
Ref: IM/SF1616/1505/GU86AA
Product Dims: 450 x 410 x 1250 mm (L*W*H)
adjustable height 900 to 1250mm
W: 5.6kg
GW: 6.4kg
Class II Product
16” / 40 cm
Model S -1616-MPC
Instruction manual
3 speeds
4 metal blades
Rotary controls
Oscillation
Tilt
Carry handle
Height adjustable to 1.25m
Round base
Please keep safe for future reference
Please Recycle
4
© 2019 ewton Stovold Assocs Ltd
GU8 6AA / www.nsauk.com

Pedestal an
Thank you for purchasing this adjustable height pedestal fan. Please read the
instructions and warnings carefully before use to ensure safe and satisfactory operation
of this product. Please retain this information for future reference.
CAUTION:
Use the fan only as described in this manual. Misuse may cause a fire
or an electric shock
1. Do not operate the fan with a damaged
power cord or plug, after it malfunctions,
has been dropped or damaged in any
way. If the power cord is damaged it
must be replaced by a qualified service
engineer to avoid a hazard.
2. Close supervision is necessary when this
fan is used near children and pets.
3. Always turn off the fan after use, before
cleaning or moving location.
4. Do not insert fingers or other objects into
the fan guard.
5. Do not operate the fan in areas where
petrol, paint or other flammable liquids
are used or stored.
6. Do not place the fan near an open
flame, cooking or heating appliance or
hot surface.
7. This fan is not intended for use in wet or
damp locations. ever position the fan in
an area where it may fall into a bath or
other water container.
8. This fan should not be operated outside.
9. Always use on a dry, level surface.
10. Do not let the power cord hang
over the edge of a table or counter.
11. Arrange the power cord away from
an area where it may be tripped
over.
12. ever place the power cord under
a carpet or rug.
13. To disconnect from the power
supply, grip the plug and pull from
the power socket. ever pull by the
cord.
14. Do not hang or mount the fan on a
wall or ceiling.
15. This product is designed for
household and light commercial use
O LY.
16. This appliance can be used by
children aged from 8 yrs and above
and persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and
understand the hazards involved.
Assembly
1. Loosen the pillar nut (16) from main pillar (14), insert the main pillar (14) into the hole
of the fan base (15) and secure with the base pillar nut & washer (16).
2. Unscrew fixing screw B (13) and adjust height to suit. Re-tighten fixing screw B (13)
once desired height is achieved.
3. Insert the motor housing (8) into the upper main pillar (14) and then fasten with fixing
screw A (12).
4. Remove fan blade nut (3) and the rear grille securing nut (5) from the motor cover
and secure the rear grille (6) to the motor cover using the three pins to align it; fasten
with rear grille securing nut (5).
5. Push the fan blade (4) onto the motor shaft (7) until the fan blade is fully seated. For
models with shaft pins, push the fan blade (4) onto the motor shaft by matching the
slots on the rear of the blade with the shaft pin.
Appliance components
Assembly (cont’d)
6. Secure the fan blade (4) with the fan blade nut (3). The blade nut (3) must be
tightened by turning it counter clockwise. Check that the fan blade (4) rotates freely
by turning it with your hand. If it does not – check the rear grille (6) is correctly
aligned on the motor housing, the rear grille nut (5) is fitted correctly and the locking
cap (3) is correctly threaded & securely tightened.
7. Open the securing clips around the front grille (1) and loosen the grille screw and
nut (2) at the bottom of the front grille (1). Position the front grille (1) hook on the
uppermost part of the rear grille (6). Push the hook down and press rim of the front
grille (1) onto the rear grille (6). Close all clips around the edge and tighten the grille
screw securely (2).
Operation
1. Position your fan on a dry, level surface & plug into an electrical socket.
2. To switch on the fan, turn the rotary speed control switch (9) to position 1, 2, or 3 as
desired. 0 = Off.
3. To assist the flow of air around the room push down the oscillation knob (10)
located on the top of the motor housing (8).
4. To stop the fan from oscillating, pull up on the oscillation knob (10).
5. Airflow can be adjusted upwards or downwards by simply tilting the fan head to
the desired level. DO OT tilt fan head when the fan is on; this may damage the
mechanism.
1.
Front grille
2. Grille screw
3. Fan blade nut
4. Fan blade
5.
Rear grille s
ecuring nut
6. Rear grille
7. Motor shaft
8. Motor housing
9.
Rotary control switch
10. Oscillation knob
11. Power cord
12. Fixing screw A
13.
Fixing screw B
14. Main pillar
15. Fan Base
16. Pillar nut & washer
2
3