nuskin AGELOC GALVANIC SPA User manual

®
AGELOC®
GALVANIC SPA®
Owner’s Manual

Table of Contents
page
Introduction 
Before You Begin 
ageLOC®Galvanic Spa®Contents 
ageLOC®Galvanic Spa®Features 
ageLOC®Galvanic Spa®Display 
How To Use 
Galvanic Spa®Facial Gels with ageLOC®
Tru Face®Line Corrector 
ageLOC®Body Shaping Gel 
ageLOC®Nutriol®Intensive Scalp & 
Hair Serum
ageLOC®Galvanic Spa®PowerMask 
ageLOC®Galvanic Spa®EnergEyes™
Important Maintenance and 
Warranty Information

2
ageLOC®Galvanic Spa®
UnLOC visible youth-renewing benefits in 5 minutes
or less.
ageLOC Galvanic Spa is our most powerful beauty
device, designed to help deliver charged treatment
products that visibly improve skin. This versatile device,
with its interchangeable attachments and unique products,
improves the appearance of lines, wrinkles, and radiance;
visibly rejuvenates your complexion; smooths away the
appearance of fat and cellulite; and promotes hair that
looks full, lustrous, and healthy.
Using galvanic currents, ageLOC Galvanic Spa propels
key ingredients to the face, scalp, and body, giving you
faster, more noticeable results. And the patented, self-ad-
justing current technology makes your treatments practi-
cally effortless.
ageLOC Galvanic Spa—using science for our greatest
visibly youth-renewing benefits.

3
Before You Begin
Please read the following advisories before using your
ageLOC®Galvanic Spa®device:
Caution: The ageLOC Galvanic Spa device is only
for use on healthy skin. Do not use if you have open
sores or wounds, are prone to rosacea, have allergies
to metal, or if you have problematic or overly sensi-
tive skin. Check with your physician before using if
you are pregnant, have a pacemaker or similar device,
are epileptic, wear metal braces on your teeth, have
a metal implant, or in case of illness.
ageLOC Galvanic Spa is not intended for use by per-
sons (including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience and
knowledge.
Do not apply directly to the lips, eyes, or eyelids. The
device and products are for external use only. If you
experience any prolonged redness or abnormal irritation,
discontinue use immediately and seek medical help if
necessary. Keep out of reach of children. Supervise
children to ensure they do not play with the device.
Use only as directed.
Remove all protective plastic film before beginning.
xTo reduce the risk of shock, burn, fire, or injury, do not
immerse your device in water. Do not place or store where
it may fall or be pulled into a bathtub, shower, sink, or
toilet. Never operate the device if it has been damaged.
xWhen removing a conductor, do not pinch or hold the
middle of the conductor, as this may prevent the release
mechanism from working. Hold onto the sides instead.

4
Owner’s Manual
ageLOC®Galvanic Spa®Device
Quick Start Guide
ageLOC®Face Conductor
Spot Treatment Conductor
Body Conductor
Scalp Conductor
Two AAA Batteries

ageLOC®Galvanic Spa®
Contents

®
AGELOC®
GALVANIC SPA®
Owner’s Manual

5
Treatment products designed for use with ageLOC®Galvanic Spa®
are sold separately.


 AAA   AAA 

 

6
Conductor Attachment Receptor
Conductor Release Button
Display
Selection Button
Chrome Panel
Battery Compartment
Conductor Positioning Indicator (small etch)
Note: Remove protective plastic film from both sides of the
device before use.
ageLOC®Galvanic Spa®
Features








7
Numbers 1, 2, 3, 4, or 5 indicate the treatment number
and corresponding product (see below).
The five dots indicate corresponding treatment length.
If the batteries are low, each time the device is turned
on an amber battery symbol will appear in the bottom
of the display and the device will beep. When the
batteries are completely dead, an amber battery
symbol will appear at the bottom of the display
and the device will turn o.
Each product should be used with the correct treatment
number:
ageLOCGalvanic Spa Display
Galvanic Spa®Facial
Pre-Treat Gel with
ageLOC®
Galvanic Spa®Facial
Treatment Gel with
ageLOC®
Tru Face®
Line Corrector
ageLOC®
Body Shaping Gel
ageLOC® Galvanic Spa®
PowerMask
(Intense Treatment)
ageLOC® Galvanic Spa®
EnergEyes™
(Intense Treatment)
ageLOC® Nutriol®
Intensive Scalp &
Hair Serum
ageLOC® Galvanic Spa®
PowerMask
ageLOC® Galvanic Spa®
EnergEyes™




8
How to use your ageLOC®
Galvanic Spa®
ageLOC Galvanic Spa includes dierent conductors for your face,
scalp, and body, but they are all used in similar ways. Specific in-
structions for individual treatments can be found on pages 10–21.
Please read the instructions before beginning any treatment.
For all treatments, you must attach the appropriate conductor
to your device. The skin touching both chrome contact points
must be moist to successfully conduct galvanic currents.
Attach a Conductor: Hold the device
with the display facing toward you. Align
the conductor positioning indicator with
the front of the device, then press the
conductor firmly down by its sides until it
snaps into place Figure 1). If the conductor
doesn’t connect, make sure it is facing
the right direction and is positioned correctly. Don’t force the
conductor, as this may damage it. ageLOC Galvanic Spa won’t
work if a conductor head isn’t firmly attached.
Remove a Conductor: First turn the
device around so the chrome panel faces
you. With your free hand, grip the con-
ductor on its sides, and then firmly press
the release button Figure 2). Gently pull
the conductor o the device by its sides.
Display Lights: The display will remain
lit while the device is on, both as you select and during treatment.
If the display blinks on and o, it is either because the device
has lost contact with your skin or skin is not moist enough to
conduct the current.
Apply Product: Apply an ample amount of product to the
area being treated on your face, scalp, or body.
Figure 1
Figure 2

9
Select Treatment: Press the selection
button until the correct treatment
number is lit Figure 3).
Activate Galvanic Current: Your fingers
must be touching the chrome panel on the
back of the device while the conductor
touches your skin. We recommend you
thoroughly wet your hands with water or NaPCA Moisture Mist
to improve conductivity.
*If your fingers slip o the chrome panel
during treatment, don’t worry—just adjust your hold on the device
and resume your spa treatment.
*Remember, the skin touching both chrome contact points must
be moist to successfully conduct galvanic currents.
During Treatment: The device will beep every 10 seconds to
indicate the unit is on and working. When 30 seconds remain
in a treatment, the device will beep every five seconds until the
treatment is complete.
Treatment Interruption: You must keep
the conductor in contact with the area
being treated and keep all contact points
moist Figure 4). If you break contact on
the chrome panel or the treatment head,
the display will flash on and o. The device
will shut o after a couple minutes of
non-use.
Treatment Completion: At the end of your treatment, the
device will emit a long beep followed by two short beeps and
automatically turn o. If you’d like to perform another treatment,
press the selection button to scroll to the next treatment number.
To turn the device o at any time, simply press the selection
button until the display goes blank.
Discontinue use if you experience swelling, redness, or a
skin reaction.
FACIA L SPA
Figure 3
Figure 4

10
Galvanic Spa®Facial Gels with
ageLOC®
Pre-treat Setting Treatment Setting Conductor
Use this treatment three-times each week for visibly rejuve-
nating results.
Preparation: Use after a Nu Skin®cleanser
of your choice. Attach the ageLOC® Face
Conductor to the device Figure 1).
GS 
PRETREAT
PRETREAT PHASE
step 1: Evenly apply an entire ampoule of
pre-treat gel to the entire face and neck,
avoiding eyes, eyelids, and lips.
step 2: Push the selection button until the
number 1 is lit on the display Figure 2). This
treatment will take 2 minutes.
step 3: Thoroughly wet hands with NaPCA
Moisture Mist or water. Hold the device with
a moistened hand while touching the chrome
plate on the back and begin to slowly glide the
conductor head over your skin Figure 3). Be
sure to avoid sensitive areas like your eyes,
eyelids, and lips.
The device will beep once, twice, or three times to indicate that
it has automatically adjusted to your skin. After this, your galvanic
treatment has begun, and the device will beep every 10 seconds
to indicate the unit is on and working, and every 5 seconds when
your treatment is almost complete.
Figure 2
Figure 3
Figure 1

11
step 4: When your galvanic treatment is
over, the device will emit a long beep
followed by two short beeps and auto-
matically turn o. Remove any remaining
gel from your skin and the device with a
damp towel Figure 4). Now it’s time for
the treatment phase.
GS 
TREATMENT
TREATMENT PHASE
step 1: Apply an entire ampoule of treatment gel to your face
and neck.
step 2: The ageLOC® Face Conductor
should already be attached, so press the
selection button once to turn the device
back on and keep pressing until you select
treatment number 2 Figure 5). This treat-
ment will take 3 minutes.
step 3: Again, hold the device with a moist-
ened hand while touching the chrome plate
on the back, and begin to slowly glide the
conductor head over your skin Figure 6).
Be sure to avoid sensitive areas like your
eyes, eyelids, and lips.
The device will beep one, two, or three
times to indicate that it has automatically
adjusted to your skin. After this, your galvanic
treatment has begun, and the device will beep every 10 seconds
to indicate the unit is on and working, and every 5 seconds when
your treatment is almost complete.
step 4: When your galvanic treatment
is over, the device will emit a long beep
followed by two short beeps and auto-
matically turn o. Use a damp towel to
remove any remaining gel from your skin
and the device Figure 7).
Figure 5
Figure 6
Figure 7
Figure 4

12
Tru Face®Line Corrector
Setting Conductor
Use this treatment morning and night to target and soften the
appearance of lines and wrinkles around your nose, mouth, eyes,
and forehead.
GS 
Preparation: Use after a Nu Skin®cleanser
and toner of your choice. Attach the Spot
Treatment Conductor to the device
Figure 1).
step 1: Apply Tru Face Line Corrector to
the lines and wrinkles you want to target.
Apply to only one of these areas at a time.
Make sure to leave a thin layer of product
on the surface of your skin.
step 2: Push the selection button until the
number 3 is lit on the display Figure 2). This
treatment will take 5 minutes.
Pro Tip: When treating multiple areas, you
can use the five minutes for more than one
area being treated. Small treatment areas
typically do not require more than one or
two minutes each.
step 3: Thoroughly wet hands with NaPCA
Moisture Mist or water. Hold the device with
a moistened hand while touching the chrome
plate on the back and begin to slowly glide
the conductor head over your skin Figure 3).
Be careful to avoid sensitive areas like your
eyes, eyelids, and lips.
Figure 2
Figure 1
Figure 3

13
The device will beep once, twice, or three times to indicate that
it has automatically adjusted to your skin. After this, your galvanic
treatment has begun, and the device will beep every 10 seconds
to indicate the unit is on and working, and every 5 seconds when
your treatment is almost complete.
step 4: When your galvanic treatment
is over, the device will emit a long
beep followed by two short beeps
and automatically turn o. Repeat
steps 1 through 3 for each targeted
area. When finished with all treatments,
rub any remaining product into your
skin and wipe any leftover product
from the device with a damp towel
Figure 4).
Figure 4

14
ageLOC®Body Shaping Gel
Setting Conductor
Use this treatment three times each week to visibly contour,
firm, and smooth skin on arms, legs, abdomen, and buttocks.
GS 
Preparation: Attach the Body Conductor
to the device Figure 1).
step 1: Use on clean skin. Apply an ample
amount of ageLOC® Body Shaping Gel
to the desired area.
step 2: Push the selection button until the
number 4 is lit on the display Figure 2). This
treatment will take 5 minutes per area.
Pro Tip: 5 minutes is the recommended
treatment time for one area, but you may
not need the full 5 minutes.
step 3: Thoroughly wet hands with NaPCA
Moisture Mist or water. Hold the device with
a moistened hand while touching the chrome
plate on the back and begin to slowly glide the
conductor head over your skin Figure 3).
The device will beep once, twice, or three
times to indicate that it has automatically
adjusted to your skin. After this, your galvanic
treatment has begun, and the device will
beep every 10 seconds to indicate the unit is
on and working, and every 5 seconds when your treatment is
almost complete.
Figure 2
Figure 3
Figure 1

15
step 4: When your galvanic treatment
is over, the device will emit a long
beep followed by two short beeps
and automatically turn o. Repeat
steps 1 through 3 for each targeted
area. When all treatments are done,
remove any remaining product from
your skin and the device with a damp
towel Figure 4).
Apply ageLOC® Dermatic Eects®twice daily to help your
skin stay visibly smooth and contoured. On days when you use
ageLOC® Body Shaping Gel, apply ageLOC® Dermatic
Eects after your galvanic treatment.

Figure 4

16
ageLOC®Nutriol®
Intensive Scalp & Hair Serum
Setting Conductor
Use this eortless ritual morning and night to help invigorate the
scalp day after day and make hair look and feel divine.
GS 
Preparation: Use on towel-dried or dry
hair. Attach the Scalp Conductor to the
device Figure 1).
step 1: Spray ageLOC Nutriol Intensive
Scalp & Hair Serum directly onto the scalp
and roots by parting hair Figure 2).
Pro Tip: Slightly spraying water on dry hair
before applying ageLOC Nutriol Intensive
Scalp & Hair Serum may make your hair
easier to manage for your treatment.
step 2: Use fingers to gently massage the
serum into scalp and roots Figure 3). Comb
away any unruly strands Figure 4).
Push the selection button until the number 5
is lit on the display Figure 5). This treatment
will take 2 minutes.
Figure 5
Figure 2
Figure 3
Figure 4
Figure 1

17
step 3: Thoroughly wet hands with
NaPCA Moisture Mist or water. Hold
the device with a moistened hand while
touching the chrome plate on the back.
Touch the conductor directly to the
scalp and move from the front of your
hairline backward, keeping in constant
contact with the scalp Figure 6).
The device will beep once, twice, or
three times to indicate that it has automatically adjusted to
your skin. After this, your galvanic treatment has begun, and
the device will beep every 10 seconds to indicate the unit is
on and working, and every 5 seconds when your treatment is
almost complete.
Note: During galvanic treatment, keep Scalp Conductor in
constant contact with the scalp
step 4: When your galvanic treatment is over, the device will
emit a long beep followed by two short beeps and automatically
turn o.
Do not rinse hair. Style as usual and
remove any remaining product from
the device with a damp towel
Figure 7).
Figure 7
Figure 6

18
ageLOC®Galvanic Spa®
PowerMask
Setting Conductor
Use this intense, luxurious treatment anytime to give you instantly
refreshed, hydrated, visibly renewed, and plump-looking skin.
GS 
Preparation: Use after a Nu Skin®cleanser
and toner of your choice. Attach the
ageLOC® Face Conductor to the device
Figure 1).
step 1: Delicately unfold the mask and remove the mesh lining
on one side Figure 2). Apply the mask to your face, with the
unlined side on your skin Figure 3). Remove the mesh lining
on the other side and Figure 4) adjust the mask to your face
Figure 5).
step 2: Push the selection button until the
number 5 is lit on the display. This treatment
will take 2 minutes Figure 6).
Pro Tip: For a more intensive treatment,
use selection number 4. This treatment will
take 5 minutes.
Figure 6
Figure 2
Figure 3 Figure 4 Figure 5
Figure 1