Nutricia FLOCARE INFINITY II User manual

PRE-PROGRAMMING SET-UP FOR PACK OR OPTRI BOTTLE
Open door and insert giving set
4
Close door (click)
5
Press and hold ON/OFF
until beeps
6
1 2 3
Wait for VOLUME screen to be
displayed (after calibration symbols)
7
Press CLR (short press)
8
Please turn over for programming options
Information contained here relates to programming the pump only. For clinical queries contact your healthcare professional.
FLOCARE®INF I NITY™ II
INSTRUCTIONS FOR USE
Rate screen will be displayed,
use +/- keys to programme rate
9
Wash hands thoroughly,
check feed and expiry date
Attach Flocare Infinity Pack giving
set to prescribed feed (or water) Screw tightly
Close door (click) Press and hold ON/OFF until beeps

Press DOSE/VOLUME, then CLR, screen will show CONT
9A Programming Option 1 – Continuous feeding
The RUN symbol will rotate to
indicate that the pump is working
13
Press DOSE=VOL, use +/- keys to programme dose
OR Programming Option 2 – Dose feeding
9B
Press and hold FILL SET until beeps;
to stop fill cycle press FILL SET again.
DO NOT OVERFILL
10
Connect giving set
to feeding tube
11
Press STARTSTOP
(3 beeps)
12
For more information call 0800 093 3672
or for online training visit nutriciaflocare.com
Information contained here relates to programming the pump only. For clinical queries contact your
healthcare professional. This information is intended for patients or carers of those who have been
prescribed a tube feed by a healthcare professional.
Nutricia Limited
Newmarket Avenue
White Horse Business Park
Trowbridge, Wiltshire BA14 0XQ
AMN0729-01/23
FOR CARE HOMES
HOMEWARD