6
- English -
Don’ts
−Don’t use the pump when there are people in the water.
−Don’t cut the cord.
−Don’t carry or pull the pump by the electrical cord.
−Don’t use extension cords.
−Don’t attempt to open the pump/motor enclosure.
−Don’t remove any labels from the pump or electrical cord.
−Don’t pinch, twist or damage the electrical cord. A minor cut even if only in the outer shell could allow
water to reach the motor enclosure and damage the pump. If you notice any damage to the cord remove
the pump and store in a dry place. Consult your local OASE Dealer for further instructions. Please note
that any damage to the electrical cord will void all warranties and could cause serious electrical shock
hazard.
Pos: 14 /Pumpen/Sc hlammsauger/Vari onaut 2 USA/Hinweis Legione llen Varionaut USA @ 7\mod_12 04798176756_121.d oc @ 45031
Important safety information
Please read these instructions carefully prior to starting up the unit!
The water system on which the operation of this product is based requires utmost care and maintenance, possibly also
the use of chemicals, in order to prevent and keep the occurrence of micro-organisms and harmful bacteria, especially
legionellae that are responsible for legionnaire’s disease, under control. Non-observance of this information about
correct maintenance and care can entail the spreading of harmful bacteria. Due to the fact that for decorative pur-
poses, water nozzles distribute water in the air, water droplets containing harmful bacteria can enter your lungs and
cause life-threatening diseases.
It is the responsibility of the owner of the water system and its attendant units to ensure their maintenance and care in
compliance with the laws, directives and instructions laid down for this purpose. In order to avert harmful contamina-
tion, we urgently recommend the user to ensure cleaning and care of the water system and the water feature including
the nozzle, and to take all necessary measures to maintain the technical units, such as pumps, hoses, tubes, cable
clamp connectors, under-water lighting and nozzles to keep them in functional order in line with safety aspects. How-
ever, the maintenance and care obligation is not limited to the technical products supplied, but encompasses the entire
system.
We also recommend the owner to keep records of the dates when maintenance and care was carried out, and to
document all water tests made in conjunction with the water feature.
The owner is solely responsible for guaranteeing the safety of the water feature. Use or maintenance of the units sold
and the system are beyond OASE’S influence. OASE can only be held liable for manufacturing faults of OASE units.
Pos: 15 /Pumpen/Sc hlammsauger/Prof imax70 00 USA/Montage Profi max USA 7000 @ 8\mod_121965045 1616_121.doc @ 50497
Installation
Only use the unit in its horizontal position and ensure stable seating on a firm ground. The unit must be positioned
below the water surface level. The unit can be placed within the pond (submersed) or outside of the pond (dry). Please
note the installation examples (A and B). Do not carry or pull the unit using its connection cable. Ensure that the unit
will never run without water flowing through!
To fit the suction hose with the unit installed outside of the pond (dry), remove the two strainer cheeks by unscrewing
the screws, then remove the front plate of the strainer. Screw the strainer cheeks back on again after having connected
the suction hose.
For replacement, the support foot (C) can be removed by releasing the locking lever (D) at the underside of the support
foot and pulling it towards the rear. To install the support foot, push the pump body onto the foot until it engages (E).
Pos: 16 /Pumpen/Sc hlammsauger/Prof imax70 00 USA/Inbetriebn ahme Profimax 7000 USA @ 8\mod_12 19651549043_121.d oc @ 50523
Start-up
Caution! Do not damage the unit.
Protective measures: Never run the unit without water.
The unit switches on automatically when connected to power. Immerse the unit in water for approx. 1 hour prior to
switching it on for the first time. Following this, operate the unit for 10 minutes against an almost fully closed pressure
socket. Following this, you can fit the nozzle and arrange the fountain system.
Pos: 17 /Pumpen/Sc hlammsauger/Prof imax70 00 USA/Reinigung Prof imax 7000 USA @ 8\mod_121965162 6998_121.doc @ 50549
Cleaning
Attention! Dangerous electrical voltage.
Possible consequences: Death or severe injury.
Protective measures: Disconnect the power plug prior to reaching into the water and commencing
work.
Should the performance reduce, clean the pump housing, strainer cheeks, etc.
Pos: 18 /Pumpen/Sc hlammsauger/Prof imax70 00 USA/Lagern Überwin tern Profimax 7000 USA @ 8\ mod_1219651694468_121. doc @ 50575