Oce CS193 User manual

Océ CS193/CS173/CS163
Océ User manual
Copy Operations - GB

Edition 2007-10 GB
Océ-Technologies B.V.
Copyright
©2007, Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or
transmitted in any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose.
Further, Océ reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation to notify any person of such
revision or changes.

CS193/CS173/CS163 Contents-1
Contents
1 Introduction
1.1 Available features............................................................................................................................ 1-3
Selecting the print color .................................................................................................................... 1-3
Automatically selecting the paper ..................................................................................................... 1-3
Adjusting copies to the size of the paper.......................................................................................... 1-3
Specifying separate horizontal and vertical zoom ratios................................................................... 1-3
Scanning the original in separate batches ........................................................................................ 1-3
Center binding and folding in half ..................................................................................................... 1-4
Sorting copies ................................................................................................................................... 1-4
Stapling copies.................................................................................................................................. 1-4
Punching holes in copies .................................................................................................................. 1-4
Copying multiple original pages onto a single page ......................................................................... 1-5
Copying an original containing various page sizes ........................................................................... 1-5
Adjusting copies according to the image quality of the original ....................................................... 1-5
Inserting paper between copies of OHP ........................................................................................... 1-5
Adding a cover page ......................................................................................................................... 1-5
Inserting different paper into copies ................................................................................................. 1-6
Inserting pages from a different original at specified locations in a copy......................................... 1-6
Printing double-sided copies with the specified page on the front side........................................... 1-6
Copying with reversed colors............................................................................................................ 1-6
Printing a mirror image...................................................................................................................... 1-7
Copying with a background color ..................................................................................................... 1-7
Improving the copy color quality....................................................................................................... 1-7
Separately copying a page spread ................................................................................................... 1-7
Repeating copy images..................................................................................................................... 1-7
Printing the enlarged image on multiple pages................................................................................. 1-7
Creating booklets from copies of pamphlets.................................................................................... 1-8
Making copies for filing ..................................................................................................................... 1-8
Adjusting the image to fit the paper size........................................................................................... 1-8
Copying with the page layout of a magazine.................................................................................... 1-8
Erasing sections of copies ................................................................................................................ 1-9
Printing a sample copy...................................................................................................................... 1-9
Printing date/time or page number on copies................................................................................... 1-9
Managing jobs................................................................................................................................... 1-9
Programming copy settings .............................................................................................................. 1-9
Checking the copy settings............................................................................................................... 1-9
Enlarging the size of text in touch panel screens.............................................................................. 1-9
Displaying explanations of functions and settings............................................................................ 1-9
Interrupting a copy job ...................................................................................................................... 1-9
1.2 Explanation of manual conventions ............................................................................................ 1-10
Safety advices ................................................................................................................................. 1-10
Sequence of action ......................................................................................................................... 1-10
Tips.................................................................................................................................................. 1-10
Special text markings...................................................................................................................... 1-11
1.3 Descriptions of originals and paper ............................................................................................ 1-11
1.4 User manuals................................................................................................................................. 1-12
1.4.1 Printed manual ................................................................................................................................ 1-12
User manual .................................................................................................................................... 1-12
1.4.2 User manual CD manuals................................................................................................................ 1-12
Copy Operations (this manual)........................................................................................................ 1-12
Print Operations .............................................................................................................................. 1-12
Box Operations ............................................................................................................................... 1-12
Network Scan/Fax/Network Fax Operations .................................................................................. 1-12
Network Administrator .................................................................................................................... 1-12

Contents-2 CS193/CS173/CS163
2 Before making copies
2.1 Part names and their functions ...................................................................................................... 2-3
2.1.1 Options .............................................................................................................................................. 2-3
2.1.2 Outside of machine............................................................................................................................ 2-5
2.1.3 Inside of machine .............................................................................................................................. 2-9
2.1.4 Finisher FS-519/Output tray OT-602/Punch kit PK-515 ................................................................. 2-10
2.1.5 Saddle stitcher SD-505/Mailbin kit MT-502 .................................................................................... 2-12
2.1.6 Job separator JS-505...................................................................................................................... 2-14
2.1.7 Control panel ................................................................................................................................... 2-16
2.1.8 Basic settings screens..................................................................................................................... 2-18
2.1.9 Icons that appear in the screen ....................................................................................................... 2-20
2.2 Adjusting the angle of the control panel ..................................................................................... 2-21
2.2.1 To adjust the angle of the control panel.......................................................................................... 2-21
2.3 Turning on the main power and the auxiliary power.................................................................. 2-23
2.3.1 Turning on the machine................................................................................................................... 2-23
2.3.2 Scanning during warm-up ............................................................................................................... 2-24
2.3.3 Turning off the machine................................................................................................................... 2-25
2.3.4 Automatically clearing settings (automatic panel reset) .................................................................. 2-26
2.3.5 Automatically canceling the mode screen (System Auto Reset)..................................................... 2-26
2.3.6 Automatically conserving energy (Low Power mode)...................................................................... 2-27
2.3.7 Automatically conserving energy (Sleep mode) .............................................................................. 2-28
2.3.8 Manually conserving energy............................................................................................................ 2-28
2.3.9 Automatically turning the machine on/off (Weekly Timer) ............................................................... 2-29
2.3.10 Controlling each user’s use of this machine (User Authentication)................................................. 2-31
2.3.11 Controlling each account’s use of this machine (Account Track) ................................................... 2-35
2.3.12 Controlling use of this machine with authentication unit (biometric type)....................................... 2-38
When "1-to-many authentication" has been specified.................................................................... 2-38
When "1-to-1 authentication" has been specified .......................................................................... 2-39
2.3.13 Controlling use of this machine with the authentication unit (IC card type) .................................... 2-40
When "Card Authentication" has been specified ............................................................................ 2-40
When "Card Authentication + Password" has been specified ........................................................ 2-42
2.4 Loading paper into tray 1/2/3/4.................................................................................................... 2-43
2.5 Loading paper into the LCT .......................................................................................................... 2-45
2.6 Loading paper into the bypass tray ............................................................................................. 2-47
3 Basic copy operations
3.1 General copy operation................................................................................................................... 3-3
3.2 Operations that cannot be combined ............................................................................................ 3-6
3.2.1 Operations where the setting specified last is given priority............................................................. 3-6
3.2.2 Operations where the setting specified first is given priority............................................................. 3-7
3.3 Feeding the original......................................................................................................................... 3-8
3.3.1 Loading the original into the ADF ...................................................................................................... 3-8
3.3.2 Placing the original on the original glass ........................................................................................... 3-9
3.3.3 Scanning the original in separate batches ("Separate Scan" setting)............................................. 3-11
3.3.4 Scanning a multi-page original from the original glass ................................................................... 3-15
3.4 Specifying original settings .......................................................................................................... 3-19
3.4.1 Specifying the original size (Original Size settings) ......................................................................... 3-19
3.4.2 Copying originals of mixed sizes ("Mixed Original" setting)............................................................ 3-21
3.4.3 Loading folded (Z-folded) originals.................................................................................................. 3-23
3.4.4 Selecting the original orientation (Original Direction settings)......................................................... 3-24
3.4.5 To select an Original Direction setting............................................................................................. 3-25
3.4.6 Selecting the position of the binding margin (Binding Position settings) ........................................ 3-27
3.4.7 To select a Binding Position setting ................................................................................................ 3-28
3.4.8 Reducing the effects of dust on the left partition glass................................................................... 3-30
3.4.9 Changing scan settings for each original ........................................................................................ 3-31

CS193/CS173/CS163 Contents-3
3.5 Selecting a Color setting .............................................................................................................. 3-34
3.5.1 To select a Color setting ................................................................................................................. 3-35
3.6 Selecting a Paper Setting ............................................................................................................. 3-37
3.6.1 Automatically selecting the paper size ("Auto" Paper setting)........................................................ 3-38
3.6.2 Manually selecting the desired paper size ...................................................................................... 3-39
3.7 Specifying a Zoom setting............................................................................................................ 3-40
3.7.1 Automatically selecting the zoom ratio ("Auto" Zoom Setting) ....................................................... 3-40
3.7.2 Specifying the zoom ratio of the original ("Full Size" setting) ......................................................... 3-41
3.7.3 Typing in the zoom ratio (XY Zoom setting) .................................................................................... 3-41
3.7.4 Slightly reducing the copy ("Minimal" setting) ................................................................................ 3-43
3.7.5 Selecting a preset zoom ratio (Enlarge and Reduce settings) ........................................................ 3-44
3.7.6 Typing in separate X and Y zoom ratios (Individual Zoom settings) ............................................... 3-45
3.7.7 Selecting a stored zoom ratio ......................................................................................................... 3-47
3.7.8 Storing the desired zoom ratio........................................................................................................ 3-48
3.8 Selecting an Original > Copy setting ........................................................................................... 3-50
3.8.1 Selecting single-sided copies ......................................................................................................... 3-51
3.8.2 Selecting double-sided copies........................................................................................................ 3-53
3.9 Selecting a combined copy setting ............................................................................................. 3-55
3.9.1 Copying multiple original pages onto a single page (combined copy settings).............................. 3-56
3.10 Selecting the quality of the original ............................................................................................. 3-58
3.10.1 Loading originals with small print or photos (Original Type settings).............................................. 3-58
3.10.2 To select an Original Type setting................................................................................................... 3-59
3.11 Selecting the Density settings ..................................................................................................... 3-61
3.11.1 Adjusting the print density (Density settings).................................................................................. 3-61
3.11.2 Adjusting the background density (Background Removal settings) ............................................... 3-63
3.11.3 Adjusting the reproduction quality of text ....................................................................................... 3-64
3.11.4 Printing with a glossy finish ("Glossy" setting) ................................................................................ 3-66
3.12 Selecting Finishing settings ......................................................................................................... 3-67
3.12.1 Separating copies by sets ("Sort" setting) ...................................................................................... 3-69
3.12.2 Separating copies by pages ("Group" Setting) ............................................................................... 3-70
3.12.3 Selecting the output tray ................................................................................................................. 3-71
3.12.4 Stapling copies (Staple settings)..................................................................................................... 3-72
3.12.5 Punching holes in copies (Punch settings)...................................................................................... 3-75
3.13 Selecting a folding setting............................................................................................................ 3-77
3.13.1 Folding copies in half ("Half-Fold" setting)...................................................................................... 3-77
3.13.2 Binding copies at the center ("Center Staple & Fold" setting) ........................................................ 3-79
3.14 Selecting not to rotate the image ................................................................................................ 3-81
3.15 Scanning the next original to be copied while a copy job is being printed
(next job reservation) .................................................................................................................... 3-82
3.16 Temporarily stopping scanning/printing..................................................................................... 3-83
3.17 Deleting a paused job ................................................................................................................... 3-84
4 Additional copy operations
4.1 Checking the Copy Settings (Check Job) ..................................................................................... 4-3
4.1.1 To check the settings ........................................................................................................................ 4-3
4.1.2 To change the settings...................................................................................................................... 4-6
4.2 Printing a proof to check the settings (Proof Copy) .................................................................... 4-7
4.3 Interrupting a copy job (Interrupt mode)....................................................................................... 4-9
4.4 Registering copy programs (Mode Memory).............................................................................. 4-10
4.4.1 Deleting a copy program................................................................................................................. 4-13
4.5 Copying with programmed copy settings (Mode Memory)....................................................... 4-14
4.6 Displaying function descriptions (Help) ...................................................................................... 4-16
4.6.1 Overview of Help screens ............................................................................................................... 4-16
4.6.2 Displaying main Help screens ......................................................................................................... 4-19

Contents-4 CS193/CS173/CS163
4.7 Specifying control panel settings (Accessibility mode) ............................................................. 4-21
4.7.1 Displaying the Accessibility Setting screen..................................................................................... 4-21
4.7.2 Setting the "Touch Panel Adjustment" function.............................................................................. 4-21
4.7.3 Setting the Key Repeat Start/Interval Time functions ..................................................................... 4-23
4.7.4 Setting the "System Auto Reset Confirmation" function................................................................. 4-24
4.7.5 Setting the "Auto Reset Confirmation" function.............................................................................. 4-26
4.7.6 Setting the "Enlarge Display Mode Confirmation" function ............................................................ 4-28
4.7.7 Setting the "Message Display Time" function ................................................................................. 4-30
4.7.8 Setting the "Sound Setting" functions............................................................................................. 4-31
5 Troubleshooting
5.1 When an error code appears .......................................................................................................... 5-3
5.2 When the message "Misfeed detected." appears ........................................................................ 5-5
5.2.1 Location of paper misfeed................................................................................................................. 5-5
5.2.2 Paper misfeed indications ................................................................................................................. 5-6
5.2.3 Clearing a paper misfeed in the ADF (feed section) .......................................................................... 5-8
5.2.4 Clearing a paper misfeed in the ADF (transport section)................................................................. 5-10
5.2.5 Clearing a paper misfeed in the ADF (scanning section)................................................................. 5-13
5.2.6 Clearing a paper misfeed in the ADF (output section)..................................................................... 5-16
5.2.7 Clearing a paper misfeed in the ADF (turnover section).................................................................. 5-18
5.2.8 Clearing a paper misfeed in the fusing unit ..................................................................................... 5-20
5.2.9 Clearing a paper misfeed in the main unit....................................................................................... 5-23
5.2.10 Clearing a paper misfeed in the automatic duplex unit................................................................... 5-25
5.2.11 Clearing a paper misfeed in the bypass tray ................................................................................... 5-27
5.2.12 Clearing a paper misfeed in the paper transport section ................................................................ 5-29
5.2.13 Clearing a paper misfeed in tray 1................................................................................................... 5-31
5.2.14 Clearing a paper misfeed in tray 2................................................................................................... 5-33
5.2.15 Clearing a paper misfeed in paper feed cabinet (Tray 3/4) ............................................................. 5-35
5.2.16 Clearing a paper misfeed in the LCT ............................................................................................... 5-36
5.2.17 To clear a banner paper misfeed..................................................................................................... 5-38
5.2.18 Clearing a paper misfeed in finisher ................................................................................................ 5-42
5.2.19 Clearing a paper misfeed in the mailbin .......................................................................................... 5-44
5.2.20 Clearing a paper misfeed in the saddle stitcher .............................................................................. 5-46
5.2.21 Clearing a paper misfeed in the separator ...................................................................................... 5-47
5.3 When the message "Unable to staple." appears........................................................................ 5-49
5.3.1 Clearing jammed staples in finisher................................................................................................. 5-50
5.3.2 Clearing jammed staples in the saddle stitcher............................................................................... 5-52
5.4 When the message "Replenish paper." appears ........................................................................ 5-53
5.5 When the message "... due to insufficient memory." appears .................................................. 5-54
5.6 When the message "Please replace following unit(s)." appears .............................................. 5-55
5.7 When the message "XXXX needs to be replaced." appears ..................................................... 5-56
5.8 When the message "Now remote operating. Please do not turn off the power."
appears........................................................................................................................................... 5-57
5.9 Simple troubleshooting ................................................................................................................. 5-58
5.10 Main messages and their remedies............................................................................................. 5-61
6 Specifications
6.1 Specifications................................................................................................................................... 6-3
6.1.1 Main unit ............................................................................................................................................ 6-3
6.1.2 Automatic duplex unit........................................................................................................................ 6-4
6.1.3 Automatic document feeder DF-611 ................................................................................................. 6-5
Possible combinations for mixed original sizes................................................................................. 6-5
6.1.4 Paper feed cabinet PC-104 ............................................................................................................... 6-5
6.1.5 Paper feed cabinet PC-204 ............................................................................................................... 6-6
6.1.6 Paper feed cabinet PC-405 ............................................................................................................... 6-6

CS193/CS173/CS163 Contents-5
6.1.7 Finisher FS-519 ................................................................................................................................. 6-6
6.1.8 Punch kit PK-515 .............................................................................................................................. 6-7
6.1.9 Saddle stitcher SD-505 ..................................................................................................................... 6-7
6.1.10 Output tray OT-602 ........................................................................................................................... 6-7
6.1.11 Mailbin kit MT-502............................................................................................................................. 6-7
6.1.12 Job separator JS-505........................................................................................................................ 6-8
7 Copy paper/originals
7.1 Copy paper....................................................................................................................................... 7-3
7.1.1 Possible paper sizes ......................................................................................................................... 7-3
7.1.2 Paper types and paper capacities .................................................................................................... 7-4
7.1.3 Special paper .................................................................................................................................... 7-4
7.1.4 Precautions for paper........................................................................................................................ 7-5
7.1.5 Paper storage.................................................................................................................................... 7-5
7.1.6 Auto tray switch feature .................................................................................................................... 7-6
7.1.7 Order for selecting paper trays ......................................................................................................... 7-6
7.2 Selecting the Paper settings .......................................................................................................... 7-7
7.2.1 Automatically detecting the paper size ("Auto Detect" setting) ........................................................ 7-7
7.2.2 Selecting a paper size setting (Size Setting) ..................................................................................... 7-8
7.2.3 Specifying a non-standard paper size (Custom Size settings) ....................................................... 7-10
7.2.4 Storing a non-standard paper size (Custom Size settings)............................................................. 7-12
7.2.5 Selecting a setting for oversized paper (Wide Paper settings)........................................................ 7-15
7.2.6 Specifying a setting for special paper............................................................................................. 7-17
7.2.7 Printing double-sided copies manually........................................................................................... 7-19
7.3 Originals ......................................................................................................................................... 7-21
7.3.1 Originals that can be loaded into the ADF ...................................................................................... 7-21
7.3.2 Precautions for loading originals into the ADF................................................................................ 7-22
7.3.3 Originals that can be placed on the original glass .......................................................................... 7-22
7.3.4 Precautions for positioning originals on the original glass.............................................................. 7-22
8 Application functions
8.1 Color Adjust parameters and samples.......................................................................................... 8-3
8.1.1 General information about color........................................................................................................ 8-4
8.1.2 "Red" parameter ............................................................................................................................... 8-6
8.1.3 "Green" parameter ............................................................................................................................ 8-7
8.1.4 "Blue" parameter............................................................................................................................... 8-8
8.1.5 "Color Balance" parameter (CMYK color adjustment)...................................................................... 8-9
8.1.6 "Brightness" parameter................................................................................................................... 8-11
8.1.7 "Contrast" parameter ...................................................................................................................... 8-12
8.1.8 "Saturation" parameter ................................................................................................................... 8-13
8.1.9 "Sharpness" parameter................................................................................................................... 8-14
8.1.10 "Hue" parameter ............................................................................................................................. 8-15
8.1.11 "Copy Density" parameter .............................................................................................................. 8-16
8.1.12 "Single Color" function.................................................................................................................... 8-17
8.1.13 "2 Color" function............................................................................................................................ 8-18
8.1.14 "Background Color" function .......................................................................................................... 8-19
8.1.15 "Neg-/Pos. Reverse" function ......................................................................................................... 8-20
Monotone copy ............................................................................................................................... 8-20
Full-color copy and "Background Color" function.......................................................................... 8-20
8.1.16 "Mirror Image" function................................................................................................................... 8-21
8.2 Inserting paper between OHP transparencies
("OHP Interleave" function) .......................................................................................................... 8-22
8.3 Adding cover pages ("Cover Sheet" function)............................................................................ 8-25
8.4 Inserting different paper into copies
("Insert Sheet" function) ............................................................................................................... 8-28

Contents-6 CS193/CS173/CS163
8.5 Inserting copies of a different original for a specified page
("Insert Image" function)............................................................................................................... 8-31
8.6 Specifying pages to be printed on the front side ("Chapters" function) .................................. 8-34
8.7 Scanning originals with different settings and printing copies all together
("Program Jobs" function) ............................................................................................................ 8-37
8.8 Copying with image colors inversed ("Neg./Pos. Reverse" function) ...................................... 8-41
8.9 Copying in a mirror image ("Mirror Image" function)................................................................. 8-43
8.10 Adding a background color to copies ("Background Color" function) .................................... 8-46
8.11 Adjusting the copy color quality (Color Adjust parameters) ..................................................... 8-48
8.11.1 To adjust the Color Adjust parameters............................................................................................ 8-49
8.11.2 Checking the print result of the Color Adjust settings (Sample Copy) ............................................ 8-51
8.12 Producing separate copies of each page in a page spread
("Book Copy" function) ................................................................................................................. 8-52
8.13 Tiling copy images ("Image Repeat" function) ........................................................................... 8-57
8.14 Copying an enlarged image on multiple pages ("Poster Mode" function)............................... 8-61
8.15 Copying booklets ("Booklet Original" function).......................................................................... 8-65
8.16 Adding a binding margin to copies ("Page Margin" function)................................................... 8-67
8.17 Adjusting the image to fit the paper (Image Adjust settings).................................................... 8-70
8.18 Copying with the page layout of a booklet ("Booklet" function)............................................... 8-73
8.19 Erasing specified areas of copies ("Frame Erase" function)..................................................... 8-75
8.20 Printing the date/time or page number on copies
(Stamp/Composition functions) ................................................................................................... 8-77
8.20.1 Printing the date/time ("Date/Time" function).................................................................................. 8-78
8.20.2 Printing the page number ("Page Number" function) ...................................................................... 8-81
8.20.3 Printing previously registered stamps ("Stamp" function)............................................................... 8-85
8.20.4 Printing copy protection text ("Copy Protect" function).................................................................. 8-89
8.20.5 Printing repeating stamps ("Stamp Repeat" function) .................................................................... 8-97
8.20.6 Printing the image scanned first overlapped by the remaining original pages
("Overlay" function)......................................................................................................................... 8-103
8.20.7 Saving a scanned image as a registered overlay ("Overlay" function) .......................................... 8-106
8.20.8 Using a registered overlay ("Overlay" function)............................................................................. 8-108
8.20.9 Printing a header/footer ("Header/Footer" function)...................................................................... 8-109
8.21 Saving the scanned original in a user box ("Save in User Box" function).............................. 8-111
9 Replacing toner cartridges and staple cartridges and emptying
punch scrap box
9.1 Replacing the toner cartridge......................................................................................................... 9-3
9.1.1 To replace the toner cartridge ........................................................................................................... 9-5
9.2 Replacing the waste toner box....................................................................................................... 9-7
9.2.1 To replace the waste toner box......................................................................................................... 9-9
9.3 Replacing an imaging unit ............................................................................................................ 9-11
9.3.1 To replace the imaging unit ............................................................................................................. 9-13
9.4 Replacing the staple cartridge ..................................................................................................... 9-17
9.4.1 To replace the staple cartridge in the finisher ................................................................................. 9-18
9.4.2 To replace the staple cartridge in saddle stitcher ........................................................................... 9-20
9.5 Emptying the punch scrap box..................................................................................................... 9-22
9.5.1 To empty the punch scrap box in the finisher ................................................................................. 9-24
10 Care of the machine
10.1 Cleaning.......................................................................................................................................... 10-3
10.1.1 Housing............................................................................................................................................ 10-3
10.1.2 Original glass ................................................................................................................................... 10-3
10.1.3 Left partition glass ........................................................................................................................... 10-4
10.1.4 Control panel ................................................................................................................................... 10-4
10.1.5 Original pad ..................................................................................................................................... 10-5
10.1.6 Electrostatic charger wire ................................................................................................................ 10-5

CS193/CS173/CS163 Contents-7
10.1.7 Print head ........................................................................................................................................ 10-6
10.2 Viewing counters (Meter Count) .................................................................................................. 10-7
10.2.1 Viewing counters............................................................................................................................. 10-7
10.2.2 Viewing the coverage rate............................................................................................................... 10-8
10.3 When the message "It is time for the scheduled inspection of the device."
appears........................................................................................................................................... 10-9
11 Managing jobs
11.1 Overview of Job List screen ......................................................................................................... 11-3
11.1.1 Jobs................................................................................................................................................. 11-3
11.1.2 Multi-job feature .............................................................................................................................. 11-3
11.1.3 Job List screens .............................................................................................................................. 11-4
11.1.4 Left panel Job List........................................................................................................................... 11-7
11.2 Performing operations on jobs .................................................................................................... 11-8
11.2.1 Deleting a job .................................................................................................................................. 11-8
11.2.2 Checking job settings...................................................................................................................... 11-9
11.2.3 Checking job details...................................................................................................................... 11-10
11.2.4 Displaying the Current Jobs list (stored jobs and active jobs)...................................................... 11-11
11.2.5 Displaying the Job History list....................................................................................................... 11-12
11.2.6 Printing a proof copy of a stored job ............................................................................................ 11-13
11.2.7 Printing a stored job ...................................................................................................................... 11-14
11.2.8 Increasing printing priority............................................................................................................. 11-16
12 Utility mode
12.1 Overview of Utility mode parameters.......................................................................................... 12-3
12.1.1 List of registration information and parameters .............................................................................. 12-3
12.2 Registering a destination.............................................................................................................. 12-7
12.2.1 Create One-Touch Destination........................................................................................................ 12-7
12.2.2 Create User Box.............................................................................................................................. 12-7
12.2.3 Limiting Access to Destinations...................................................................................................... 12-7
Access Level ................................................................................................................................... 12-7
Level settings .................................................................................................................................. 12-8
Group .............................................................................................................................................. 12-8
Specifying a group setting .............................................................................................................. 12-9
Specifying a destination level........................................................................................................ 12-10
Specifying a user level................................................................................................................... 12-12
12.2.4 Displaying the destination registration screen .............................................................................. 12-14
12.3 Specifying user settings ............................................................................................................. 12-15
12.3.1 System Settings ............................................................................................................................ 12-15
12.3.2 Custom Display Settings............................................................................................................... 12-17
12.3.3 Copier Settings.............................................................................................................................. 12-18
12.3.4 Scan/Fax Settings ......................................................................................................................... 12-20
12.3.5 Printer Settings.............................................................................................................................. 12-21
12.3.6 Change Password ......................................................................................................................... 12-21
12.3.7 Change E-Mail Address ................................................................................................................ 12-21
12.3.8 Displaying the User Settings screen ............................................................................................. 12-22
12.4 Specifying administrator settings.............................................................................................. 12-23
12.4.1 System Settings ............................................................................................................................ 12-23
12.4.2 Administrator/Machine Settings.................................................................................................... 12-28
12.4.3 One-Touch/User Box Registration................................................................................................ 12-29
12.4.4 User Authentication/Account Track .............................................................................................. 12-29
12.4.5 Network Settings........................................................................................................................... 12-32
12.4.6 Copier Setting ............................................................................................................................... 12-32
12.4.7 Printer Settings.............................................................................................................................. 12-33
12.4.8 Fax Settings .................................................................................................................................. 12-33

Contents-8 CS193/CS173/CS163
12.4.9 System Connection ....................................................................................................................... 12-33
12.4.10 Security Settings............................................................................................................................ 12-34
12.4.11 Displaying the Administrator Settings screen................................................................................ 12-37
12.5 Check Consumable Life .............................................................................................................. 12-39
12.5.1 Displaying the Check Consumable Life screen............................................................................. 12-39
12.6 Overview of weekly timer settings ............................................................................................. 12-40
12.7 Printer Adjustment....................................................................................................................... 12-41
12.7.1 Leading Edge Adjustment ............................................................................................................. 12-41
12.7.2 Centering ....................................................................................................................................... 12-42
12.7.3 Leading Edge Adjustment (Duplex Side 2) .................................................................................... 12-43
12.7.4 Centering (Duplex 2nd Side).......................................................................................................... 12-44
12.8 Finisher Adjustment .................................................................................................................... 12-46
12.8.1 Center Staple Position Adjustment ............................................................................................... 12-46
12.8.2 Half-Fold Position .......................................................................................................................... 12-47
12.8.3 Punch Horizontal Position Adjustment .......................................................................................... 12-49
12.8.4 Punch Regist Loop Size Adjustment ............................................................................................. 12-50
12.9 Color Registration Adjust ........................................................................................................... 12-52
12.9.1 Adjusting the color registration for yellow, magenta and cyan ..................................................... 12-52
12.10 Gradation Adjustment ................................................................................................................. 12-54
12.11 Header/Footer Settings............................................................................................................... 12-56
12.11.1 Specifying headers/footers............................................................................................................ 12-56
12.11.2 Editing headers/footers ................................................................................................................. 12-58
12.12 Authentication Method................................................................................................................ 12-59
12.12.1 User authentication and account track ......................................................................................... 12-59
12.12.2 When user authentication and account track are synchronized ................................................... 12-59
12.12.3 When user authentication and account track are used separately ............................................... 12-60
12.12.4 Selecting an authentication method.............................................................................................. 12-61
12.13 User Authentication Setting........................................................................................................ 12-64
12.13.1 Administrative Settings—List ........................................................................................................ 12-64
12.13.2 Default Function Permission.......................................................................................................... 12-64
12.13.3 Public User Access........................................................................................................................ 12-65
12.13.4 User Registration ........................................................................................................................... 12-66
12.13.5 User Counter ................................................................................................................................. 12-71
12.13.6 Viewing user counters ................................................................................................................... 12-72
12.14 Account Track Setting................................................................................................................. 12-73
12.14.1 Account Track Registration ........................................................................................................... 12-73
12.14.2 Account Track Counter.................................................................................................................. 12-77
12.14.3 Viewing account counters ............................................................................................................. 12-78
12.15 Password Rules ........................................................................................................................... 12-79
12.15.1 Conditions of the password rules.................................................................................................. 12-79
12.16 Enhanced Security Mode ............................................................................................................ 12-81
13 Appendix
13.1 Entering text................................................................................................................................... 13-3
13.1.1 Enlarging the keyboard.................................................................................................................... 13-5
13.1.2 To type text...................................................................................................................................... 13-6
13.1.3 List of available characters.............................................................................................................. 13-6
13.2 Glossary.......................................................................................................................................... 13-7
14 Index

1Introduction

CS193/CS173/CS163 1-3
Introduction 1
1 Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the machine, precautions on its use,
and basic troubleshooting procedures. In order to ensure that this machine is used correctly and efficiently,
carefully read this manual as needed.
For detailed safety information and operation precautions, refer to the User Manual.
For descriptions on trademarks and copyrights, refer to the User Manual.
The illustrations used in this manual may appear slightly different from views of the actual equipment.
1.1 Available features
Selecting the print color
The color used to print copies can be specified, for example, the copy can be printed in full color or in black
and white.
For details, refer to "Selecting a Color setting" on page 3-34.
Automatically selecting the paper
The most appropriate paper size can automatically be selected based on the size of the loaded original and
the specified zoom ratio.
For details, refer to "Automatically selecting the paper size ("Auto" Paper setting)" on page 3-38.
Adjusting copies to the size of the paper
The most appropriate zoom ratio can automatically be selected based on the size of the loaded original and
the specified paper size.
For details, refer to "Automatically selecting the zoom ratio ("Auto" Zoom Setting)" on page 3-40.
Specifying separate horizontal and vertical zoom ratios
By specifying separate horizontal and vertical zoom ratios, copies of the original can be resized as desired.
For details, refer to "Typing in separate X and Y zoom ratios (Individual Zoom settings)" on page 3-45.
Scanning the original in separate batches
An original with a large number of pages can be divided and scanned in separate batches. Double-sided
copies can be produced by using the original glass or the original pages can be alternately loaded onto the
original glass or into the ADF, and then all pages can be copied together as a single job.
For details, refer to "Scanning the original in separate batches ("Separate Scan" setting)" on page 3-11 and
"Scanning a multi-page original from the original glass" on page 3-15.

1Introduction
1-4 CS193/CS173/CS163
Center binding and folding in half
Copies can be folded at their center ("Half-Fold" setting) or bound with staples ("Center Staple & Fold"
setting).
For details, refer to "Selecting a folding setting" on page 3-77.
Sorting copies
The finishing method for copies can be selected.
For details, refer to "Separating copies by sets ("Sort" setting)" on page 3-69, "Separating copies by pages
("Group" Setting)" on page 3-70.
Stapling copies
Multi-page originals can be copied and stapled together.
For details, refer to "Stapling copies (Staple settings)" on page 3-72.
Punching holes in copies
Holes for filing can be punched in the copies.
For details, refer to "Punching holes in copies (Punch settings)" on page 3-75.
Half-fold Center staple and fold

CS193/CS173/CS163 1-5
Introduction 1
Copying multiple original pages onto a single page
Multiple pages of the original can be printed together on a single page.
For details, refer to "Copying multiple original pages onto a single page (combined copy settings)" on
page 3-56.
Copying an original containing various page sizes
An original with various page sizes can be scanned and copied together.
For details, refer to "Copying originals of mixed sizes ("Mixed Original" setting)" on page 3-21.
Adjusting copies according to the image quality of the original
The copies can be adjusted according to the image quality of the original.
For details, refer to "Loading originals with small print or photos (Original Type settings)" on page 3-58or
"Adjusting the print density (Density settings)" on page 3-61.
Inserting paper between copies of OHP
In order to prevent OHP from becoming stuck to each other, a page (interleaf) can be inserted between the
transparency copies.
For details, refer to "Inserting paper between OHP transparencies ("OHP Interleave" function)" on page 8-22.
Adding a cover page
Cover pages can be added to copies, or copies can be made using different paper (for example, colored
paper) for only the cover pages.
For details, refer to "Adding cover pages ("Cover Sheet" function)" on page 8-25.

1Introduction
1-6 CS193/CS173/CS163
Inserting different paper into copies
Different paper (such as colored paper) can be inserted for specified pages in the copies.
For details, refer to "Inserting different paper into copies ("Insert Sheet" function)" on page 8-28.
Inserting pages from a different original at specified locations in a copy
An original scanned later can be inserted for specified pages in an original scanned earlier for copying.
For details, refer to "Inserting copies of a different original for a specified page ("Insert Image" function)" on
page 8-31.
Printing double-sided copies with the specified page on the front side
Double-sided copies can be printed with the specified pages on the front side.
For details, refer to "Specifying pages to be printed on the front side ("Chapters" function)" on page 8-34.
Copying with reversed colors
An original can be copied with the light- and dark-colored areas of the original image inversed. With Color
setting "Full Color", copies are printed with the hues and brightness inversed. With Color setting "Black" or
"Single Color", copies are printed with the hues inversed.
For details, refer to "Copying with image colors inversed ("Neg./Pos. Reverse" function)" on page 8-41.

CS193/CS173/CS163 1-7
Introduction 1
Printing a mirror image
An original can be copied in its mirror image.
For details, refer to "Copying in a mirror image ("Mirror Image" function)" on page 8-43.
Copying with a background color
An original can be copied using one of the 18 colors available as the color of the background (blank areas).
For details, refer to "Adding a background color to copies ("Background Color" function)" on page 8-46.
Improving the copy color quality
You can adjust color copies to the quality for the desired image.
For details, refer to "Adjusting the copy color quality (Color Adjust parameters)" on page 8-48.
Separately copying a page spread
A page spread, such as in an open book or catalog, can be copied onto separate pages.
For details, refer to "Producing separate copies of each page in a page spread ("Book Copy" function)" on
page 8-52.
Repeating copy images
An original image can be repeatedly printed on a single sheet of paper.
For details, refer to "Tiling copy images ("Image Repeat" function)" on page 8-57.
Printing the enlarged image on multiple pages
A single original page can be automatically split into parts with each part printed enlarged.
For details, refer to "Copying an enlarged image on multiple pages ("Poster Mode" function)" on page 8-61.

1Introduction
1-8 CS193/CS173/CS163
Creating booklets from copies of pamphlets
Pamphlets with their staples removed can be copied and bound with staples.
For details, refer to "Copying booklets ("Booklet Original" function)" on page 8-65.
Making copies for filing
Copies can be printed with a filing margin so they can easily be stored in filing binders.
For details, refer to "Adding a binding margin to copies ("Page Margin" function)" on page 8-67.
Adjusting the image to fit the paper size
When the copy paper is larger than the original, copies can be printed so that the original image fills the paper.
For details, refer to "Adjusting the image to fit the paper (Image Adjust settings)" on page 8-70.
Copying with the page layout of a magazine
Copies can be made with the pages arranged in a layout for center binding, such as for a magazine.
For details, refer to "Copying with the page layout of a booklet ("Booklet" function)" on page 8-73.

CS193/CS173/CS163 1-9
Introduction 1
Erasing sections of copies
Areas, such as the shadows of punched holes and transmission information in received faxes, can be erased
in copies.
For details, refer to "Erasing specified areas of copies ("Frame Erase" function)" on page 8-75.
Printing a sample copy
Before printing a large number of copies, a single sample copy can be printed so that it can be checked.
For details, refer to "Printing a proof to check the settings (Proof Copy)" on page 4-7.
Printing date/time or page number on copies
The date/time, page number or copy protection text (hidden text that prevents improper copying) can be
printed on copies, or each copy set can be printed with distribution numbers.
For details, refer to "Printing the date/time or page number on copies (Stamp/Composition functions)" on
page 8-77.
Managing jobs
The print status of copy jobs can be checked and the jobs can be managed.
For details, refer to "Managing jobs" on page 11-3.
Programming copy settings
Frequently used copy settings can be programmed and recalled to be used with other copy jobs.
For details, refer to "Registering copy programs (Mode Memory)" on page 4-10.
Checking the copy settings
Screens showing the current copy settings can be displayed. From these screens, the copy settings can also
be changed.
For details, refer to "Checking the Copy Settings (Check Job)" on page 4-3.
Enlarging the size of text in touch panel screens
The text and buttons in the touch panel can be displayed in a larger size that is easier to read, allowing basic
operations to be easily performed.
For details, refer to the User manual – Enlarge Display Operations.
Displaying explanations of functions and settings
The name and function of parts and details of functions and settings appears in the Help screens.
For details, refer to "Displaying function descriptions (Help)" on page 4-16.
Interrupting a copy job
The copy job being printed can be interrupted in order for a different copy job to be printed.
For details, refer to "Interrupting a copy job (Interrupt mode)" on page 4-9.

1Introduction
1-10 CS193/CS173/CS163
1.2 Explanation of manual conventions
The marks and text formats used in this manual are described below.
Safety advices
6 DANGER
Failure to observe instructions highlighted in this manner may result in fatal or critical injuries in fact
of electrical power.
%Observe all dangers in order to prevent injuries.
7 WARNING
Failure to observe instructions highlighted in this manner may result in serious injuries or property
damage.
%Observe all warnings in order to prevent injuries and to ensure safe use of the machine.
7 CAUTION
Failure to observe instructions highlighted in this manner may result in slight injuries or property
damage.
%Observe all cautions in order to prevent injuries and to ensure safe use of the machine.
Sequence of action
1The number 1 as formatted here indicates the first step of a
sequence of actions.
2Subsequent numbers as formatted here indicate subsequent
steps of a sequence of actions.
?Text formatted in this style provides additional assistance.
%Text formatted in this style describes the action that will
ensure the desired results are achieved.
Tips
2
Note
Text highlighted in this manner contains useful information and tips to ensure safe use of the machine.
2
Reminder
Text highlighted in this manner contains information that should be reminded.
!
Detail
Text highlighted in this manner contains references for more detailed information.
An illustration inserted
here shows what operations
must be performed.