Ocean Matrix OMX-01HMET0003 User manual

Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
Specifications
HDMI Audio Formats LPCM 2.0/2.1/5.1/6.1/7.1
Dolby Digital, Dolby TrueHD, Dolby Digital Plus
DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
Dimensions 2.36 x 3.50 x 0.71 in
Weight TX 5.64oz, RX 5.47oz
Includes (1) 12V/1A Power Supply, (1) IR Blaster, (1) IR Receiver
Power Consumption 3.84W
INSTALLATION & SPECIFICATIONS
OMX-01HMET0003
4K HDMI Extender
Specifications
Compliance HDMI 2.0 / HDCP 2.22 / HDCP 1.4
Certification CE, RoHS
Video Bandwidth 18Gbps
Video Resolutions Up to 4K60Hz 4:4:4
Color Space RGB / YCbCr 4:4:4, YCbCr 4:2:2/4:2:0,
YUV 4:4:4
Color Depth 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz
YCbCr 4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4 )
TRANSMITTER
RECEIVER
CAT OUT 12VDCIR OUTHDMI IN
CAT IN
IR IN
HDMI OUT
12VDCHDMI OUT
MONITOR
MONITOR
Power Adapter
Connect to Either
TX or RX,
NOT BOTH
IR BLASTER
IR RECEIVER
CAT CABLE
BLUE-RAY or Other
HDMI SOURCE
DEVICE

Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
LED Indicators
IR Blaster & IR Extender
GREEN
LED ORANGE LED
Green LED illuminates when the transmitter or
the receiver is ON.
Orange LED illuminates when the transmitter and
receiver are transmitting signal.
IR BLASTER
IR RECEIVER
IR Blaster Signal
Power
IR Signal
NC
Power
Grounding
DVD IR Blaster
IR Receiver
CAT CABLE
Monitor
DVD Remote
TRANSMITTER RECEIVER
IR remote sends signal up to
16 feet at a 45vertical angle.

SAFETY PRECAUTIONS
1. To prevent fire or shock hazard, do not expose this equipment to high humidity and/or dust.
Do not use in an unprotected outdoor installation nor any area classified as overly damp or wet.
2. The temperature for installation should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct
sunlight exposure or extreme changes of temperature over a short period of time.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be permanently installed unless proper ventilation is provided. Any enclosure open-
ings must not be blocked or covered as they protect the unit from overheating.
6. Before cleaning, turn off the power and unplug the unit from all connections. Use a damp cloth. Do not
use liquid cleaners nor aerosol cleaners.
7. Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through
openings as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock.
9. Do not attempt to open or service this unit yourself as opening or removing covers may expose you to
dangerous voltage and other hazards.
10.There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized
dealer, or an authorized repair service company.
Troubleshooting
No image output
 Ensure power supply is firmly connected. Only use the 5VDC power adapter included with the unit.
 Check that the cables are securely connected.
 Check that the display/TV has been set to the proper input.
 For PC connections via HDMI, set output mode to mirror or extend in display settings.
Display is unstable
 Check all connections.
 Connect the source directly to the display device to ensure there is a signal output.
 Change the signal source if necessary.
 Use only high-quality copper standardized CAT6 cable.
Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com