Ocean Matrix OMX-01DVDV0001 User manual

Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
Specifications
Transmission Distance up to 1080p@60 Hz up to 328 feet over Cat 5e/6
Bandwidth 1.65Gbps
Dimensions Each Unit 3-3/8 x 2-1/2 x 7/8 Inches
Weight Each Unit 5.3 oz
Includes 1- Transmitter, 1-Receiver, 12VDC/1A Locking Power Supply,
4-Mounting Brackets, 8-Screws
DVI Monitor
Typical Configuration
DVI Source Transmitter Receiver
DVI
Cable
INSTALLATION & SPECIFICATIONS
OMX-01DVDV0001
1080p/60 DVI Video Monitor Signal Extender Kit
1 DVI Output Connector
2 Cat 5e/6 Input
3 Cat 5e/6 Indicator LED
4 12 VDC Power Input Jack
5 Power Indicator LED
1 DVI Input Connector
2 Cat 5e/6 Output
3 Cat 5e/6 Indicator LED
4 12 VDC Power Input Jack
5 Power Indicator LED
43
1
2 5 43
1
2 5
TRANSMITTER RECEIVER
Cat5e/6
Cable DVI
Cable
Note: Connect a power supply to either the transmitter or the receiver, not both.

Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
SAFETY PRECAUTIONS
 To prevent fire or shock hazard, do not expose this equipment to dust or high humidity. Do not use in an
unprotected outdoor installation or in areas classified as overly damp or wet.
 The installation temperature should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme
changes of temperature over a short period of time.
 Do not place the unit on an unstable base and avoid heavy impact.
 Proper ventilation is required for permanent installation. Do not block or cover enclosure openings as they protect the unit from
overheating.
 Prior to cleaning, turn the power off and unplug the unit from all connections. Use a damp cloth. Do not use liquid or aerosol
cleaners.
 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
 Enclosure entry is dangerous. Never push objects of any kind, including liquids, through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock.
 Do not open or service this unit yourself as opening or removing covers may expose you to dangerous voltage and other hazards.
 There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or authorized repair
service company.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Federal Communications Commission (FCC) Compliance Notices