Ocean Matrix OMX-10HMIP0004 User manual

OMX-10HMIP0004 1080P HDMI Over IP 1 x 4 Transmitter
OMX-11IPHM0003 1080P HDMI Over IP Receiver with 4 RJ45 Ports
HDMI Over IP Extender with IR
INSTALLATION & SPECIFICATIONS
Rev1a
Ocean Matrix
812 Kings Highway •SaugerƟes, NY 12477
www.oceanmatrix.com
Transmitter Kit Includes:
 One 5VDC/2A Power Adapter
 One IR Transmitter Cable
 Two Brackets
 Four Screws
Receiver Kit Includes:
 One 5VDC/2A Power Adapter
 One IR Receiver Cable
 Two Brackets
 Four Screws
OMX-10HMIP0004 Transmitter OMX-11IPHM0003 Receiver
NOTE: Compatible with Ocean Matrix OMX-11IPHM0001 Receiver 1080P HDMI Over IP

2
CONNECTION
1. Connect the HDMI source to the TX.
2. Connect the TX to the RX with Cat5e/6 cable.
3. Connect the RX to the HDMI displays with HDMI cable.
4. Connect the IR TX cable to the IR port of the TX.
5. Connect the IR RX cable to the IR port of the RX.
6. Plug in the included power supplies to turn on the TX and the RX.
NOTE: Point to many configurations require different IP addresses and MAC addresses for each receiver.
Ocean Matrix OMX-10HMIP0004 & OMX-11IPHM0003 Installation
SPECIFICATIONS
Protocol TCP/IP
Compliance HDMI, HDCP
Transmission
Distance 394 feet/120m over Cat5e/6
IR Frequency 38kHz-56kHz
Audio Format LPCM, 2 Channel Audio
Audio Sampling Rate 32kHz, 44.1kHz and 48kHz
1 Power Input
2 Reset (Insert pin and hold for 10 seconds. When
the Status LED goes out, reset is complete.)
3 IR-RX Port
4 HDMI Output
5 LED Signal Status Indicator
6 LED RJ45 Link Indicators
7 LED Receiver Indicator
8 LED Power Indicator
1 Power Input
2 Reset (Insert pin and hold for 10 seconds. When
the Status LED goes out, reset is complete.)
3 IR-TX Port
4 HDMI Input
5 RJ45 Ports
6 LED RJ45 Link Indicators
7 LED Transmitter Indicator
8 LED Power Indicator
OMX-10HMIP0004 TRANSMITTER
OMX-11IPHM0003 RECEIVER
SPECIFICATIONS
Video Format DTV
HDTV:480i/576i/480P/576P/720P/1080P
Power Consumption 5W Each Unit
Enclosure Black Powder-Coated Steel
Dimensions Each Unit
(LxWxH) 5.71 x 3.35 x 1.10 inches
Weight Each Unit 5.12 oz
Ocean Matrix
www.oceanmatrix.com
431 2 5
431 2 5
7 86
7 86

3
Ocean Matrix 10HMIP0004 & OMX-11IPHM0003 Installation
Transmitter
OMX-10HMIP0004
Receiver
OMX-11IPHM0003
Receiver
OMX-11IPHM0001
Receiver
OMX-11IPHM0001
HDMI Source
HDMI
Display
HDMI
Display
HDMI
Display
HDMI
Display
Receiver
OMX-11IPHM0003
Receiver
OMX-11IPHM0003
Receiver
OMX-11IPHM0003
Receiver
OMX-11IPHM0003
Point to Many Configuration Examples
Receiver
OMX-11IPHM0001
Transmitter
OMX-10HMIP0004
HDMI Source
Receiver
OMX-11IPHM0001
HDMI
Display
HDMI
Display
HDMI
Display
HDMI
Display
Receiver
OMX-11IPHM0001
Receiver
OMX-11IPHM0001
Ocean Matrix
www.oceanmatrix.com
Example 1
Example 2
HDMI Cable
Cat5e/6 Cable
HDMI Cable
Cat5e/6 Cable

4
SAFETY PRECAUTIONS
 To prevent fire or shock hazard, do not expose this equipment to dust or high humidity. Do not use in an
unprotected outdoor installation or in areas classified as overly damp or wet.
 The installation temperature should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme
changes of temperature over a short period of time.
 Do not place the unit on an unstable base and avoid heavy impact.
 Proper ventilation is required for permanent installation. Do not block or cover enclosure openings as they protect the unit from
overheating.
 Prior to cleaning, turn the power off and unplug the unit from all connections. Use a damp cloth. Do not use liquid or aerosol
cleaners.
 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
 Enclosure entry is dangerous. Never push objects of any kind, including liquids, through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock.
 Do not open or service this unit yourself as opening or removing covers may expose you to dangerous voltage and other hazards.
 There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or authorized repair
service company.
Rev1a
Ocean Matrix
812 Kings Highway •SaugerƟes, NY 12477
www.oceanmatrix.com
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Federal Communications Commission (FCC) Compliance Notices