Ocean Matrix OMX-01HMBT0010 User manual

OMX-01HMBT0010 HDBaseT 4K HDMI Extender Set
INSTALLATION & SPECIFICATIONS
1 Power LED Indicator
2 ON LED-Indicates working status
3 LINK LED Indicator
4 HDCP LED Indicator
Green-HDMI with HDCP
Flashing Green-No HDCP
Off-No HDMI Signal
5 Factory Use Only
7 8 96 10
Front
3 4 52
1 Power LED Indicator
2 Link LED Indicator
3 HDCP LED Indicator
Green-HDMI with HDCP
Flashing Green-No HDCP
Off-No HDMI Signal
4
HDMI IN 1 LED Indicator Orange-Connected to source
Green-Device is selected as source
5 HDMI IN 1-Connect source
Front
7
8
9
1 3
4
5
6
2
10
11
12
6 HDMI OUT-Connect display
7 HDBT IN-Connect to HDBT OUT on
TX
8 USB IN-Connect HID devices such as
mouse or keyboard to control device
connected to the TO PC on TX.
9 RS232-Connect RS232 device
10 Plug in Power Supply
7 HDMI IN 2-Connect second source
8 RESET-Press to reboot the TX
9 Factory Use Only
10 TO PC-Connect to Computer
11 DISPLAY ON/OFF via CEC/RS232
12 SOURCE SELECT
6 HDMI IN 2 LED Indicator
Orange-Connected to source
Green-Device is selected as source
ReceiverTransmitter
13 PoC IN/HDBT OUT-connect to HDBT IN on RX
14 DC OUT-Connect compatible device to be powered
15 RS232-Connect RS232 computer or controller
1
Back 1514
13
Ocean Matrix
www.oceanmatrix.com
Back
Typical Application
Control functions
via CEC on HDMI or
RS232 Connections

3
Ocean Matrix OMX—01HMBT0010
SIGNAL SWITCHING
RS232 CONTROL
Press SOURCE SELECT to switch to the next source device.
AUTO-SWITCHING: To enable auto-switching, press and hold SOURCE SELECT for 3 seconds. When a new input signal is de-
tected, the transmitter will automatically switch to this new signal. To exit this mode, press and hold SOURCE SELECT.
REBOOTING: Upon rebooting, the transmitter will retain the last setting for switching mode.
LOCAL TRANSMITTER CONTROL: Connect a control
device, such as a computer, to the TX RS232 port.
DISPLAY CONTROL
Press DISPLAY ON/OFF to turn the display on or off.
THIRD PARTY DEVICE CONTROL BY COMPUTER
1. Connect the computer to the RX RS232 port.
2. Connect third party device to the TX RS232 port.
THIRD PARTY DEVICE CONTROL
1. Connect the computer to the TX RS232 port.
2. Connect third party device, such as a
projector, to the RX RS232 port.
Ocean Matrix
www.oceanmatrix.com

4
Ocean Matrix
www.oceanmatrix.com
Ocean Matrix OMX—01HMBT0010
RS232 STANDARD SERIAL CONTROLLER TERMINAL
Download the control software. Find the download on the Ocean Matrix website on the OMX-01HMBT0010 product page.
1. Copy the control software file to the control PC
2. Set the following parameters:
 COM Number
 Baud Rate: 2400, 4800, 9600, 19200, 38400, 57600 or 115200
 Data Bit: 8
 Stop Bit: 1
 Parity Bit: None
RS232 COMMAND
Signal Switching
TRANSMITTER CONTROL
Set the following Commands:
 Baud Rate: 9600
 Data Bit: 8
Command Function Feedback Example
50701% Switch to HDMI IN 1 input. SWITCH TO HDMI1
50702% Switch to HDMI IN 2 input. SWITCH TO HDMI2
50710% Enable auto-switching mode. AUTO SWITCHING
50711% Disable auto-switching mode. MANUAL SWITCHING
50712% Get the signal switching mode. AUTO SWITCHING or MANUAL SWITCHING
 Stop Bit: 1
 Parity Bit: None
CEC Command—Display must Support CEC
Note: Not all displays/monitors with CEC adhere fully to all command functions.
Command Function Feedback Example
50730% Volume Up on Display CEC VOLUME INCREASE
50731% Volume Down on Display CEC VOLUME DECREASE
50732% Mute CEC VOLUME MUTE
50733% Display ON CEC DISPLAY ON
50734% Display OFF CEC DISPLAY OFF
HDCP Command
Command Function Feedback Example
50709% HDCP Mode HDCP: ON
HDCP: OFF
50713% HDCP Status HDCP 2.2
NO HCDP
Factory Default
Command Function Feedback Example
50617% Restore Factory Default FACTORY RESET
50699% Firmware Version VERSION Vx.x.x

5
SAFETY PRECAUTIONS
 To prevent fire or shock hazard, do not expose this equipment to dust or high humidity. Do not use in an
unprotected outdoor installation or in areas classified as overly damp or wet.
 The installation temperature should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme
changes of temperature over a short period of time.
 Do not place the unit on an unstable base and avoid heavy impact.
 Proper ventilation is required for permanent installation. Do not block or cover enclosure openings as they protect the unit from
overheating.
 Prior to cleaning, turn the power off and unplug the unit from all connections. Use a damp cloth. Do not use liquid or aerosol
cleaners.
 Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
 Enclosure entry is dangerous. Never push objects of any kind, including liquids, through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock.
 Do not open or service this unit yourself as opening or removing covers may expose you to dangerous voltage and other hazards.
 There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or authorized repair
service company.
Rev1a
Ocean Matrix
812 Kings Highway •SaugerƟes, NY 12477
www.oceanmatrix.com
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Federal Communications Commission (FCC) Compliance Notices
FEATURES
Extends Two-Way IR Signals
RS232 & CEC Pass Through
Transmission Distance: 1080P up to 230 Feet, 4K up to 131 Feet
Two-Way PoC
Rugged Black Powder-Coated Metal Enclosure
CE, FCC Certified
Includes: (1) 3Pin Terminal Block,(4) Mounting Ears & (4) Screws,,
(1) RS232 Cable (3Pin to DB9), (1) 24V/1.25A power supply
EDID Management
Supports ARC & Audio De-embedding – TOSLINK/SPDIF Out on Receiver
SPECIFICATIONS
Compliance HDMI 2.0, HDCP 2.2/1.4
Video Bandwidth 18Gpbs
HDMI Video Resolutions up to 4Kx2K@60Hz 4:4:4
Audio Formats PCM, Dolby Digital, Dolby True-HD,
DTS, DTS-HD
Frequency Response 20Hz-20KHz, +/- 3dB
Power Consumption 12W
Power Input 100-240VAC, 50/60Hz
Dimensions (HxWxD) 0.77 x 5.7 x 3.3 in
Weight TX 9.7 oz, RX 10.23 oz