Ocean Matrix OMX-01HMHM0007 User manual

OMX-01HMHM0007
Ocean Matrix 4K/60Hz 4:4:4 HDR HDMI
PoC Extender up to 164 Feet over Cat6

Zero latency transmission
Extend 4K@60Hz HDMI signals up to 50m over CAT6/6A/7 cable
Supports HDR10
PoC functionality
EDID passthrough and auto downscaling
HDMI loop out
IR passthrough
Lightning protection, surge protection, ESD protection
The Ocean Matrix OMX-01HMHM0007 is a 4K/60Hz 4:4:4 HDR HDMI extender that extends 4K
signal up to 50m and 1080p up to 70m over CAT6/6A/7 cable. With zero-latency transmission,
EDID passthrough, auto-downscaling, and an HDMI loop-out function, the OMX-01HMHM0007 is
the ideal extender for monitoring systems, education, conference rooms and home theaters.
Description:
Features:
Specifications:
Maximum Transfer Rate: 18Gbps
Maximum Transmission Bandwidth: 600MHz
Compatibility: HDMI 2.0 (deep color, 4K, HDR, YUV4:4:4), HDCP 2.2, HDCP 1.4
Supported Resolutions: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz ,720p@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz, 3840x2160@24/25/30/50/60Hz, 2048x1080, 1920x1440,
1920x1080, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900,
1024x768, 800x600
Transmission Distance: 4K - 50m / 1080p - 70m
Audio Formats: LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1CH/Dolby Atmos
IR Interface: TX: 1x3.5mm IR OUT Female / RX: 1x3.5mm IR IN Female
Power Supply: DC5V/500mA
Power Consumption: TX < 2.3W / RX < 1.5W
Working Temperature: -20°F - 140°F (-20°C - 60°C)
Storage Temperature: -22°F - 158°F (-30°C - 70°C)
Dimensions (LxWxH): TX & RX: 3 x 2.3 x 0.83in
Weight: TX 0.2813lbs / RX 0.2813lbs
Item Includes:
OMX-01HMHM0007 Extender Set (1 x Transmitter / 1 x Receiver)
1 x DC to USB Power Cable
1 x IR Blaster Extension Cable
1 x IR Receiver Extension Cable

Operation Controls and Functions:

Operation Controls and Functions:

Operation Controls and Functions:

The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged
(b) Objects or liquids have gotten into the unit
(c) The unit has been exposed to rain
(d) The unit does not operate normally or exhibits a marked change in performance; The unit has been
dropped or the cabinet is damaged.
(2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
(3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer. Unauthorized substitutes may result in fire, electric shock, or other hazards.
(4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is
in proper working condition.
Damage requiring service:
PRODUCT SERVICE
Always follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any openings or empty slots
in the unit, as you may damage parts inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
Do not allow anything to rest on the power cabling or allow any weight to be placed
upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufficient space for air to circulate around
the unit
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply.
Please keep the following in mind as you unpack and install the unit:
SAFETY PRECAUTIONS
812 Kings Highway | Saugerties, NY 12477 | 845-246-7500 | www.oceanmatrix.com
100% Employee Owned Division of Tower Products Incorporated
WARRANTY
1 Year