OEM Tools 24219 Service manual

UNPACKING
After unpacking the unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with the carrier.
DO NOT use the OEMTOOLS™Spare Tire Removal Set if
broken, bent, cracked or damaged parts (including labels)
are noted. Any Spare Tire Removal Set that appears
damaged in any way, operates abnormally or is missing
parts should be removed from service immediately. If you
suspect that the Spare Tire Removal Set was subjected
to shock load (a load that was dropped suddenly,
unexpectedly, etc.), immediately discontinue use until it has
been checked by a factory authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you use your Spare Tire Removal Set under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are
not known or not followed. The following safety instructions are to provide the user with the information necessary for safe use
and operation. Please read and retain these instructions for the continued safe use of your tool. Failure to follow instructions
listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows
these safety instructions as well.
Operating Instructions and Parts Manual 24219
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
[email protected]
SPARE TIRE
REMOVAL SET
Thank you very much for choosing an OEMTOOLS™Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS™cannot be responsible for issues
arising from modification. We strongly recommend that this product is not modified and/or used for any application other than that
for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
WARNING:This product can expose you to chemicals, including lead, which are known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Explanation of Safety Signal Words
WARNING:Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result
in property damage.
NOTES:Provide clarity and helpful information.
WARNING
1
5/19
2019 OEMTOOLS™

2
Operating Instructions and Parts Manual 24219
SPARE TIRE
REMOVAL SET
5/19
2019 OEMTOOLS™
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your tool. Read this manual carefully. Learn the
tool’s applications and limitations, as well as potential
hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
3. Keep children away. All children should be kept away
from the work area. Never let a child handle a tool
without strict adult supervision.
4. DO NOT operate this tool if under the influence of
alcohol or drugs. Read warning labels on prescriptions
to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, DO NOT
attempt to operate.
5. Use safety equipment. Eye protection should be worn at all
times when operating this tool. Use ANSI approved safety
glasses. Everyday eyeglasses are NOT safety glasses. Dust
mask, non-skid safety shoes, hard hat or hearing protection
should be used in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties,
rings, bracelets or other jewelry may present a potential
hazard when operating this tool. Keep all apparel clear
of the tool.
7. DO NOT overreach. Keep proper footing and balance
at all times when operating this tool.
8. Store idle tools out of the reach of children and
untrained persons. Tools may be dangerous in the
hands of untrained users.
9. Maintain tools with care.
10. Keep tools dry and clean.
11. Check for damage. Check your tool regularly. If part of
the tool is damaged, it should be carefully inspected
to make sure that it can perform its intended function
correctly. If in doubt, the part should be repaired. Refer
all servicing to a qualified technician. Consult your
dealer for advice.
12. DO NOT use a damaged tool. Tag damaged tools “Do
not use” until repaired.
13. Keep away from flammables. DO NOT attempt
to operate this tool near flammable materials or
combustibles. Failure to comply may cause serious
injury or death.
14. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous when
used on another tool.
15. Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
16. When servicing a tool, use only identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
17. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use this
product in a damp or wet location.
18. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS™for a replacement.
19. Before use, read and understand all warnings, safety
precautions, and instructions as outlined in the vehicle
manufacturer’s service manual. It is beyond the
scope of this manual to properly describe the correct
procedure and test data for each vehicle.
20. The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator must
understand that common sense and caution are factors
which cannot be built into this product, but must be
supplied by the operator.
21. Always perform vehicle service in a properly ventilated
area. Never run an engine without proper ventilation
for its exhaust. Stop work and take necessary steps
to improve ventilation in the work area if you develop
momentary eye, nose, or throat irritation as this
indicates inadequate ventilation.
DISPOSAL
At the end of the useful life of the Spare Tire Removal Set,
dispose of the components according to all state, federal
and local regulations.
PRODUCT DESCRIPTION
The OEMTOOLS™24219 Spare Tire Removal Set has
everything you need to remove spare tires stored on the
undercarrage of pickups, vans and SUVs.
PRODUCT SPECIFICATIONS
Product Dimensions: 32.5" L x 7.5" W x 0.5” D
Weight: 3.2 Lbs.
Product Material: Zinc-plated Steel
Case Material: Heavy Nylon
Number of Attachments: 5
SPECIFIC SAFETY INSTRUCTIONS
AND WARNINGS
1. Wear protective clothing, gloves and eyewear while
working with the Spare Tire Removal Set.

3
Operating Instructions and Parts Manual 24219
SPARE TIRE
REMOVAL SET
5/19
2019 OEMTOOLS™
APPLICATION CHART
1 2 3 4 5
Figure Description Quantity
1 Small Square
Attachment
Ford F-Series 2005-Newer*
2 Large Square
Attachment
Newer GM Suburbans, Tahoe*
Newer Dodge Pickups*
3 Hex Attachment Older Dodge Pickups*
Older Chevy HD Pickups*
4 Flat Blade
Attachment
Ford Trucks up to 2004,
E-Series Vans, Rangers*
GM Vans, Light Duty Trucks
1990-1999, S-10*
5 T-Shaped
Attachment
Toyota Trucks and SUVs*
Nissan Trucks and SUVs*
*May not fit all years/models
OPERATION
1. Use the application chart to select the correct
attachment for your vechicle.
2. Push the spring-loaded button on the shaft to release
the locking sleeve. Pull the locking sleeve back toward
the shaft to expose the threaded stud.
3. Screw the selected attachment (Step #1) to the
exposed threaded stud. Leave a 1/8" gap between the
shaft and the end of the attachment.
4. Return the locking sleeve to the original position, until
the spring-loaded button re-engages. Ensure the
locking sleeve is secure before use; the locking sleeve
should cover the bottom of the shaft during use.
5. Attach the handle to the opposite end of the shaft by
inserting the end of the shaft into the handle socket.
STORAGE
1. Always store the Spare Tire Removal Set in a well-
protected area where it will not be exposed to
inclement weather, corrosive vapors, abrasive dust, or
any other harmful elements.
Parts Diagram
8
6
1
2
3
4
57
Parts List
Figure Description Quantity
1Small Square Attachment 1
2Large Square Attachment 1
3Hex Attachment 1
4Flat Blade Attachment 1
5T-Shaped Attachment 1
6Shaft 1
7Handle 1
8Case 1
Note: Not all components of the Spare Tire Removal Set
are replacement items, but are illustrated as a convenient
reference for location and position in the assembly
sequence. The manufacturer and/or distributor have
provided the parts list and diagram in this manual as a
reference tool only.
Please read the following carefully.
OEMTOOLS™and/or its distributors have provided the
parts list and assembly diagram as a reference only.
Neither OEMTOOLS™nor its distributors make any
representation or warranty of any kind to the buyer and/
or user of this tool that he or she is qualified to do any
repairs or replace any parts of this product. OEMTOOLS™
and its distributors expressly state that all repairs or parts
replacement should be done by certified or licensed
technicians. The buyer assumes all risk and liability
arising out of his or her repairs or parts replacement to
the original production.
Shaft
Button
Button
Shaft
Shaft
Shaft
Shaft
Locking SleeveLocking Sleeve
Shaft
Handle
Attachment
Attachment
Approximate 1/8" Gap
Locking Sleeve
Locking Sleeve Hole
Threaded Stud

4
Operating Instructions and Parts Manual 24219
SPARE TIRE
REMOVAL SET
5/19
2019 OEMTOOLS™
OEMTOOLS™ONE YEAR WARRANTY
If for up to one year from the date of purchase of this OEMTOOLS™product, you find any defect in material or
workmanship, through normal usage, return it to the place of purchase, or to OEMTOOLS™for repair or replacement
at our discretion. In order to obtain this service, send your tool and proof of purchase, transportation pre-paid,
to OEMTOOLS™Q.A. Dept., 3580 E. Raines Road #3, Memphis, TN 38118. We will not be responsible for lost or
damaged goods during transportation; please insure your package. If our inspection verifies the defect, we will either
repair or replace the product at our election, or we may elect to refund the purchase price if we cannot readily and
quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is
no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of
returning the product.
OEMTOOLS™does not provide warranty for products labeled other than OEM®or OEMTOOLS™. OEMTOOLS™will
not provide any warranty for products subjected to abnormal use. Abnormal use includes, but is not limited to, abuse,
accident, alteration, neglect, and unauthorized or unreasonable use or repairs. This warranty does not cover bits,
blades, files, batteries, or calibration. We recommend that you maintain your tools and sharpen or replace blades, bits,
files, and batteries as necessary. OEMTOOLS™reserves the right to make any changes in construction or design at
any time without any obligation in incorporating such changes to tools or equipment previously sold.
OEMTOOLS™makes every effort to ensure that its products meet high quality and durability standards, and warrants
to the original purchaser that this product is free from defects in materials and workmanship for the period of one
year from the date of purchase. This warranty does not apply to damage due directly or indirectly to misuse, abuse,
negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear
and tear or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or
consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY
IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS. This warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state.
Don’t forget to register your new OEMTOOLS™product at www.oem-tools.com.
CONTACT US
3580 E. Raines Road, Suite 3, Memphis, TN 38118
Tel: [phone]
www.oem-tools.com