Ohio Steel HEAPED DUMP CART 3460HKD User manual

3460HKD
20 CUBIC FOOT
HEAPED DUMP CART
ASSEMBLY MANUAL
3460HKD
REPAIR PART LIST
CAUTION:
READ AND FOLLOW
ALL SAFETY RULES
AND INSTRUCTIONS
BEFORE USING
THIS EQUIPMENT
REV-NC
Ohio Steel Industries
Columbus, OH 43224 U.S.A.
Visit our website: www.ohiosteel.com
For missing parts or questions
Call 1-800-652-2321
FULL ONE-YEAR WARRANTY
If this product fails due to a defect in material or workmanship within one year from the date
of purchase, Ohio Steel will at its option repair or replace it free of charge. This warranty
excludes Tires and Wheels which are expendable and become worn during normal use.
Proof of purchase required .
This warranty does not cover:
· Repairs necessary because of operator abuse or negligence.
· Equipment use for commercial or rental purposes.
Contact Ohio Steel to arrange for product repair, or return this product to place of purchase
for replacement.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. This Warranty applies only while this product is in use in the United
States.
1
2
3
4
34 38
7
8
31
35
11
19
19
18
32
20
17
30
50
28K
28K
12
14
16
28
9
13
15
23
25
21
5
REF.NO. PART NO. AMT. DESCRIPTION REF.NO. PART NO. AMT. DESCRIPTION
1 7-1 1 Right Body Half 19 7-19 4 Axle Washer 1"
2 7-2 1 Left Body Half 20 55-20 2 Hub Cap
3 7-3 1 Front Gate 21 7-21 2 Wheel #3
4 7-4 2 Corner 23 55-23K 51 5/16"-18 Keps Nut
5 7-5 1 Rear Support Bar 25 55-25 51 5/16"-18 x 3/4 Pan Head
7 7-7 1 Tailgate 28 55-28 1 3/8"-16 X 3/4" Hex Head
8 7-8 1 Tailgate Rod 28K 55-28K 2 3/8"-16 Keps Nut
9 7-9 1 Front Support 30 55-30 1 Hitch Pin
11 7-11 1 Axle Holder 31 7-31 2 Cotter Pin 3/32 x 3/4
12 27-12A 1 Drawbar Assembly 32 7-32 2 Cotter Pin 1/8 x 1 1/2"
13 55-13A 1 Latch Post Bar 34 55-7A 1 Gate Retainer - Right
14 55-14A 1 Latch Bolt 3/8"-16x4"Hex 35 55-8A 1 Gate Retainer - Left
15 55-15A 1 Latch Spring 36 7-BBA 1 Hardware Bag
16 55-16A 1 Hitch Bracket 38 7-38 2 Reflector
17 7-17 1 Axle #2 39 7-39 1 Assembly Instruction
18 7-18 2 HDPE Spacer 2-1/16" 50 55-31 1 Hairpin Cotter

4
4
3
Step3. Loosely attach front gate and corners.
Square assembly and tighten all bolts.
9
11
Step2. Loosely attach front support and
axle holder.
1
2
Step1. Loosely assemble body halves
as shown.
7
Reflector
35
534
Hitch
Pin
Hair
Pin
8
Cotter
Pin
Step 5. Loosely attach rear support bar and gate retainers. Slide tailgate rod
through top holes in rear of body and secure with cotter pins. Insert
tail gate and tighten bolts. Add reflectors Insert hitch pin and secure
with hairpin cotter.
MAINTENANCE
Check tire pressure regularly, 30psi.•
Periodically check all bolts.•
Keep cart clean to prevent rust.•
Store inside a clean dry area.•
SAFETY INSTRUCTION
Do not carry passengers in cart.•
Do not tow cart on public roads.•
Never exceed LOAD CAPACITY of 1500lbs.•
Avoid sudden turns or maneuvers.•
When operating on slopes, use lowest•
ground speed and limit load to 200lbs.
Operate up and down slopes, never•
across the face.
Large blade screwdriver.
1/2" wrench and/or socket.
Pliers.
TOOLS REQUIRED
Hub Cap
Axle Washer
Axle Washer
Axle Spacer
Cotter Pin
21
12 11
17
Step 4. Center axle through axle holder & drawbar.
Place washer, spacer, wheel, and washer onto axle.
Lock in place with cotter pin. Bend ends of pin to lock.
REF. NO. QTY. DESCRIPTION
1 1 Right Body Half
21LeftBodyHalf
3 1 Front Gate
42Corner
5 1 Rear Support Bar
71Tailgate
81TailgateRod
9 1 Front Support
11 1 Axle Holder
12 1 Drawbar Assembly
17 1 Axle #2
21 2 Wheel #3
34 1 Gate Retainer - Right
35 1 Gate Retainer - Left
39 1 Assembly manual
BB 1 Hardware bag
CARTON CONTENTS