Ohio Steel 3040P User manual

READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS BEFORE USING THIS EQUIPMENT
3040P
10 cu ft POLY DUMP CART
6000181 - REV E 3/11

Read and understand all safety rules and operating instructions before using this
tractor attachment.
Follow all safety rules and operating instructions provided by your vehicle's
manufacturer when using attachment.
Never allow children or untrained persons to operate vehicle or attachment.
Do not exceed the vehicle manufacturer's towed weight limit.
Reduce vehicle speed and allow extra stopping distance when towing heavy
loads.
Reduce vehicle speed and towed weight when operating on slopes.
Operate up and down slopes, never across the face of slopes.
Do not carry passengers on vehicle or attachment.
Avoid sudden turns or maneuvers.
Do not tow attachment on public roadways.
Do not remove warning decals from product.
Check product for worn, loose, or damaged parts before each use. If any damage
is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or replace
fasteners as needed before using.
Do not exceed vehicle speed of 6 miles per hour when towing Dump Cart.
Do not exceed Dump Cart rated weight capacity of 325 pounds.
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
1
Safety Rules

9 (x1)
25 (x1)
23 (x1)
24 (x3)
1 (x1)
4 (x1)
3 (x4)
2 (x2)
8 (x2)
7 (x2)
5 (x1)
6 (x1)
11 (x2)
12 (x2) 22 (x2)
TOOLS REQUIRED FOR ASSEMBLY:
Large Flat Screwdriver • 1/2" Wrench or Socket •
19 (x32)
21 (x12)
20 (x34) 10 (x4)
2
Carton Contents

19
8
4
5
6
20
12
AH
AH
AK
SECTION AH-AH
2
20
21
1
19
BD
BD
20
19
21
22
Attach Front Support and Latch Angle loosely to Brace Supports
as shown using supplied hardware.
Attach Front Support Assembly loosely to body with hardware as shown.
Attach Undercarriage Axle Supports loosely to body
with hardware as shown.
* NO SCREW
3
Assembly Instructions
1
3
2

* NOTE: LOOSELY TIGHTEN
BOLTS AT THIS TIME
19
20
3
25
8
19
20
11
9
Attach two axle holders to the axle supports as shown using the supplied hardware
Attach latch angle to drawbar assembly with supplied
hardware as shown
Insert axle into undercarriage halfway as shown.
Attach spacer, drawbar assembly, and spacer
4
Assembly Instructions
4
6
5

* NOTE: TIGHTEN
ALL HARDWARE
AT THIS TIME
10
12
7
10
24
* NOTE: MAKE SURE
VALVE STEM IS
FACING OUT
23
24
Slide axle completely through undercarriage. Align drawbar with the
front support and pull handle to latch. Attach washers and spacers as shown.
Slide wheels and washers onto axle and secure with hairpins as shown.
Install hitch pin and hairpin to secure to attachment vehicle.
5
Assembly Instructions
7
9
8

How to Use Dump Cart:
Attach Dump Cart to your tractor using the supplied hitch pin. 1.
Do not exceed 325 pounds when loading material into the cart body. 2.
Distribute the weight of the load as evenly as possible in the cart body for 3.
best handling.
When hauling heavy loads, verify that your vehicle has adequate towing 4.
and braking capacity.
Do not exceed 6 miles per hour when towing Dump Cart. 5.
Before Using Dump Cart:
Check tire pressure and inflate to 30 psi if needed. 1.
Read all Safety Rules found on page 1. 2.
How to Empty Dump Cart:
Pull hand lever forward to release the latch mechanism. 1.
Angle cart body as desired to guide the material to preferred location. 2.
Lower the body and guide the latch into the drawbar and relatch. 3.
Periodic Maintenance:
Tighten fasteners as needed before each use •
Check tire pressure before each use •
Inspect parts for damage and replace if necessary •
6
Operating Instructions

If this product fails due to a defect in material or workmanship within TWO
YEARS from the date of purchase, we will at our option repair or replace it free of
charge. This warranty excludes tires and wheels, which are expendable and
become worn during normal use.
This warranty does not cover:
Repairs necessary because of operator abuse or negligence. •
Equipment used for commercial or rental purposes. •
Paint that is worn or faded due to normal use or exposure. •
To arrange for product repair call 1-800-652-2321, or return this product to place
of purchase for replacement.
This warranty gives you specific legal rights, and you may also have other rights
which may vary from state to state. This warranty applies only while this product
is in use in the United States.
In the space below record the purchase date of your Dump Cart.
Model Number 3040P
Purchase Date
Keep this Owner's Manual and your receipt in a safe place for future reference.
After the two year warranty period all replacement parts may be ordered by
calling 1-800-652-2321 .
When ordering replacement parts, always give the following information:
Product 10 cu ft POLY DUMP CART •
Model Number 3040P •
Part Number •
Part Description •
7
Warranty

119
21
22
21
19
21
2
20
19
20
3
20
910
12 7
10
24
19
11
5
6
4
20
19
13
88
20
19
18
20
17
15
23
14
16
24 18
19
26
28
27
25
29
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 6000186 1
2 6000028 2
3 6000029 4
4 6000025 1
5 6000022 1
6 6000023 1
7 6000027 2
8 6000024 2
9 6000030 1
10 3000721 WASHER, 3/4" SAE 4
11 6000105 SPACER, 3/4 x 1.25" 2
12 6000666 SPACER 2
13 401111 LATCH POST 1
14 401121 BRACKET, HITCH 1
15 300131 SPRING, LATCH 1
16 300052 HEX BOLT, 3/8-16 X 3/4" 1
17 300053 HEX BOLT, 3/8-16 X 4" 1
18 300061 HEX NUT, 3/8-16 C-LOCK 2
19 300054 TRUSS HD SCREW, 5/16-18 X 3/4" 32
20 6000418 34
21 3000711 WASHER, 5/16" USS 12
22
SL-PHMS 0.3125-
18x0.75x0.75-S
2
23 6000533 PIN, HITCH 1
24 300084 HAIRPIN COTTER, 0.093" X 2-5/16" 3
26 6000811 - 1
8
Repair Parts
REPLACEMENT PARTS ORDERING OHIO STEEL INDUSTRIES 1-800-652-2321

www.OHIOSTEEL.com
[phone]
Designed And Tested In Columbus, Ohio
MODEL # 3040P
2575 Ferris Road Columbus, OH 43224
[phone]
Manufactured In The U.S.A. From Domestic
And Imported Components