Oki MC160MFP User manual

1
Country/Region • Pays/Région • País/región • País/região
United States and Canada, Etats-Unis et
Canada, Estados Unidos y Canadá
Mexico, México
America Latina (otro),
Latin America (other)
Brasil, Brazil
Español
Información de Seguridad . . . . . . . . . . . . . . . . . 30
Garantía Limitada, Estados Unidos y Canadá . . . . 32
ServicioyApoyo........................ 34
Información reglamentaria . . . . . . . . . . . . . . . . . 37
Hojas de Información sobre Seguridad de los
Materiales (MSDS). . . . . . . . . . . . . . . . . . . . . . 40
Français
Informations sur la sécurité . . . . . . . . . . . . . . . . 15
Garantie limitée, États-Unis et Canada . . . . . . . . 17
Service et soutien . . . . . . . . . . . . . . . . . . . . . . . 19
Informations réglementaires . . . . . . . . . . . . . . . 20
Fiches technique santé-sécurité (MSDS) . . . . . . . 22
English
SafetyInformation ....................... 2
Warranty Information . . . . . . . . . . . . . . . . . . . . . 3
Service and Support . . . . . . . . . . . . . . . . . . . . . . 4
Regulatory Information . . . . . . . . . . . . . . . . . . . . 5
Material Safety Data Sheets (MSDS) . . . . . . . . . . . 7
Español
Información de Seguridad . . . . . . . . . . . . . . . . . 30
ServicioyApoyo........................ 35
Información reglamentaria . . . . . . . . . . . . . . . . . 37
Hojas de Información sobre Seguridad de los
Materiales (MSDS). . . . . . . . . . . . . . . . . . . . . . 40
English
SafetyInformation ....................... 2
Regulatory Information . . . . . . . . . . . . . . . . . . . . 5
Material Safety Data Sheets (MSDS) . . . . . . . . . . . 7
Español
Información de Seguridad . . . . . . . . . . . . . . . . . 30
ServicioyApoyo........................ 36
Información reglamentaria . . . . . . . . . . . . . . . . . 37
Hojas de Información sobre Seguridad de los
Materiales (MSDS). . . . . . . . . . . . . . . . . . . . . . 40
Português
Informações de segurança . . . . . . . . . . . . . . . . . 44
Informações sobre a garantia . . . . . . . . . . . . . . . 47
Informações normativas . . . . . . . . . . . . . . . . . . 48
Fichas de Informação de Segurança do Produto . . 51
Safety, Warranty and Regulatory Information . . . . . . . . . . . . . . . .2
Informations de sécurité, de garantie, et de réglementation . . . .15
Información sobre seguridad, garantía, y regulaciones . . . . . . . .30
Informações sobre segurança, garantia e normativas . . . . . . . . .44
English
SafetyInformation ....................... 2
Regulatory Information . . . . . . . . . . . . . . . . . . . . 5
Material Safety Data Sheets (MSDS) . . . . . . . . . . . 7
English
SafetyInformation ....................... 2
Regulatory Information . . . . . . . . . . . . . . . . . . . . 5
Material Safety Data Sheets (MSDS) . . . . . . . . . . . 7
MC160n MFP

2 - English
Safety Information,
120-Volt Models
Your OKI product has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should
take to avoid hurting yourself or damaging the product.
Carefully read the provided setup and operating
instructions.
Save all provided documentation for future reference.
Read and follow all warning and instruction labels on the
product itself.
Unplug the product before you clean it. Use only a damp
cloth; do not use liquid or aerosol cleaners.
Place your product on a rm, solid surface. If you put
it on something unsteady, it may fall and be damaged.
If you place it on a soft surface, such as a rug, sofa, or
cushion, the vents may be blocked, causing the product
to overheat.
Protect your product from overheating. Make sure no
obstructions block the openings of the product. Do not
put the product on or near a heat source (such as a
radiator or heat register). Keep the product out of direct
sunlight.
Always use this product in a well ventilated area.
Allow enough room around the product for adequate
ventilation and easy access to the paper trays. If you
put the product in any kind of enclosure, make sure the
enclosure is well ventilated.
Do not use your product near water. Do not spill liquid of
any kind into it.
Be certain that your power source matches the rating
listed on the back of the product. If you are not
sure, check with your dealer or with your local power
company.
Do not connect this product to an uninterruptible power
supply (UPS). For further information please contact Oki
Data at 1-800-OKI-DATA.
Your product has a grounded, three-prong plug as a
safety feature. This plug only ts into a grounded outlet.
If the plug does not t, the outlet may be an older,
non-grounded type. Contact an electrician to have the
outlet replaced. Do not use an adapter to defeat the
grounding.
Install the product near an easily accessed power outlet.
Avoid damaging the power cord. Do not put anything
on it or place it where it will be walked on. If the cord
becomes damaged or frayed, replace it immediately.
If you are using an extension cord or power strip with
the product, make sure that the total of the amperes
required by all the equipment on the extension is less
than the extension’s rating. The total ratings of all
equipment plugged into the outlet should not exceed 15
amperes.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Do not poke anything into the ventilation slots of the
product. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a re.
Aside from the routine maintenance described in the
documentation, do not try to service the product
yourself. Removing the cover may expose you to shocks
or other hazards.
Do not make any adjustments other than those
outlined in the documentation. You may cause damage
that will require extensive repair work. The provided
documentation explains how to get your product
serviced by qualied Oki Data technicians.
If anything happens that indicates that your product is
not working properly or has been damaged, unplug it
immediately and follow the procedures in the provided
documentation for having your product serviced.
Here are some of the things to look for.
The power cord or plug is frayed or damaged.
Liquid has been spilled into the product, or the product
has been exposed to water.
The product has been dropped, or the cabinet is
damaged.
The product does not function normally when you are
following the operating instructions.
Additional Safety Information for Tele-
communications Equipment
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk
of re, electric shock and injury to persons, including the
following:
Do not use this product near water—for example, near a
bathtub, washbowl, kitchen sink or laundry tub—in a wet
basement, or near a swimming pool.
Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.
Do not use the telephone to report a gas leak in the
vicinity of the leak.
Use only the power cord and batteries indicated in this
manual. Do not dispose of batteries in a re. They may
explode. Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS.
•
•
•
•
•
•
•
•
•
•
•
Safety, Warranty and Regulatory Information

3 - English
Limited Warranty, US and Canada
U.S. and Canada only
Oki Data Americas, Inc. (Oki Data) warrants this MC160n
MFP (hereinafter “the Product”) to be free from defects in
material and workmanship and will remedy any such defect
according to, the terms of this Limited Warranty.
Oki Data will repair or at its option, replace, with the same
or its functional equivalent, at no charge, any defective
component(s) of the Product for one (1) year from the date
of purchase.
This Limited Warranty only extends to the original
purchaser of the warranted item. This Limited Warranty is
not transferable. This Limited Warranty does not extend
to consumable items or supplies, such as toner cartridges,
image drums, ribbon cartridges, fuses, etc.
Overnight Exchange
US and Canada Only
Oki Data offers Overnight Exchange of the Product
under this Limited Warranty. Overnight Exchange is only
available in the United States and Canada and it does
not include the replacement or repair of the Product’s
consumable items or supplies.
If you choose to use our Overnight Exchange service,
call 1-800-654-3282 (1-800-OKI-DATA): our trained
personnel will try to solve your problem over the
phone. If they determine that your Product hardware is
defective, an exchange product will be shipped to you
via overnight carrier. Have your credit card available as
our representative will be asking for this information.
You will receive the exchange product the next business
day--or no later than the second business day.
Return the original Product to Oki Data by using the
same packaging materials you received with the
exchange product. The Product to be returned must be
made available for pickup by Oki Data’s representative
within two (2) business days of your receipt of the
exchange product: failure to do so may result in your
being charged the full price of the exchange unit.
Before you ship the Product, remove the toner/drum
assemblies to prevent damage to the Product during
shipment: failure to do so may result in your credit card
being charged for cleaning and/or repairs to the Product.
When Overnight Exchange is used, the returned machine
becomes the property of Oki Data, once it has been
picked up by Oki Data or its representative. Exchange
machines may be new or reconditioned, at the option of
Oki Data: the exchange machine becomes the property
of the customer when the returned machine has been
picked up by Oki Data’s designated carrier.
The exchange printer will be warranted for thirty (30)
days or the remaining warranty period of the returned
Product, whichever is longer.
To make a request or claim for service under this Limited
Warranty contact your local Oki Data authorized service
center, Oki Data at 1-800-654-3282 (1-800-OKI-DATA), or
www.okiprintingsolutions.com.
A written receipt for the Product, showing the date of
purchase, dealer’s name, and both the model and serial
numbers of this Product must accompany any request
or claim for work to be performed under this Limited
Warranty.
This Limited Warranty shall not apply to normal wear and
tear and shall not apply if the Product has been damaged
due to abuse, misuse, misapplication, accident, improper
storage, or installation, an unsuitable physical operating
environment, or as a result of service or modication by
any other than an authorized Oki Data service center.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN
THOSE ON THE FACE HEREOF AND DESCRIBED
ABOVE. NO WARRANTIES WHETHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL
EXTEND BEYOND THE RESPECTIVE WARRANTY
PERIODS DESCRIBED ABOVE.
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not
apply to you.
IN NO EVENT SHALL OKI DATA OR ITS AFFILIATES
BE LIABLE TO A PURCHASER OR ANY OTHER PERSON
FOR SPECIAL, COLLATERAL, PUNITIVE, INCIDENTAL
OR CONSEQUENTIAL DAMAGES INCLUDING LOST
PROFITS, BUSINESS REVENUE, GOODWILL OR
ANTICIPATED SAVINGS IN CONNECTION WITH OR
ARISING OUT OF THE PURCHASE OR USE OF THE OKI
DATA PRODUCT, WHETHER ARISING IN CONTRACT
OR IN TORT, WHETHER OR NOT CUSTOMER SHALL
HAVE INFORMED OKI DATA OF THE POSSIBILITY OR
LIKELIHOOD OF ANY SUCH DAMAGES.
Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above
exclusion may not apply to you.
ADDITIONAL WARRANTY DISCLAIMERS FOR ALL
PURCHASERS EXCEPT CONSUMERS:
WHEN ANY OKI DATA PRODUCT SHALL BE
PURCHASED BY ANY PERSON SUCH THAT THE OKI
DATA PRODUCT IS NOT A “CONSUMER GOOD” (AS
DEFINED IN THE UNIFORM COMMERCIAL CODE
ADOPTED IN THE STATE OF PURCHASE OR IN
OTHER APPLICABLE LAW), OKI DATA EXPRESSLY
DISCLAIMS ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
Additional information on obtaining service under this
Limited Warranty in the U.S. and Canada is available by
contacting the Oki Data dealer from whom the Product
was purchased, by contacting Oki Data directly at 1-800-
654-3282 (1-800-OKI-DATA), or by contacting one of the
service locations listed below. Spanish Only: call 1-856-
222-5276. Canada Only: call 1-905-238-4275.

4 - English
United States
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Phone: [phone]
Fax: [phone]
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East, Unit 1
Mississauga, Ontario
Canada L4W 4M8
Phone: [phone]
Fax: [phone]
This Limited Warranty applies to this Product. However,
the procedure for obtaining service may vary outside the
continental United States. Contact your Oki Data dealer for
such warranty service information.
This warranty gives you specic legal rights, and you may
also have other rights which vary from state to state.
Service and Support,
US and Canada
U.S. and Canada only
Oki Data is rmly committed to the satisfaction of our
customers. If you have a problem that your customer
documentation cannot solve, contact the listed sources for
service or support.
Oki Data Authorized Service Providers
For the most comprehensive, up-to-date listing of Oki
Data authorized Service Centers in the United States and
Canada:
In the U.S. go to www.okiprintingsolutions.com.
In Canada and the U.S., call 1-800-654-3282 (1-800-
OKI-DATA).
Oki Data Contact Locations
United States
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Phone: [phone]
Fax: [phone]
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East, Unit 1
Mississauga, Ontario
Canada L4W 4M8
Phone: [phone]
Fax: [phone]
Sales and Service Dealers
Consult the store location where you purchased your
machine, or contact Oki Data for the location of the nearest
Authorized Oki Data Service Dealer.
Prices and minimum charges may vary.
Proof of purchase is required for warranty work. Be sure
to retain your purchase documents.
Automated Services for Your Convenience
Quick Referrals
To get quick referrals for a local Sales and Service
Authorized Reseller, including products, parts and
consumable supplies, contact us at any time:
•
•
•
•
1-800-654-3282 (1-800-OKI-DATA)
www.okiprintingsolutions.com
Your Own Personal Solutions Center
You can easily create your own Personal Solutions Center
providing up-to-the-minute Oki information specically for
your product, including:
Product news
Manuals
Drivers and utilities
Material Safety Data Sheets
Searchable knowledge base
and much more!
Just take a few minutes setting it up once, then you
can check your Personal Solutions Center for the latest
information at any time.
Get started today by visiting http://MY.OKIDATA.com.
Customer Support Representatives
1-800-654-3282 (1-800-OKI-DATA)
Customer Support Representatives are available 24 hours
a day, 7 days a week. Please have the model number and
serial number for your machine handy. Be sure that you
are calling from a telephone close to your machine so you
can describe your problem accurately and follow up on
the suggestions of the Customer Support Representative
right while you are on the phone. Our Customer Support
Representatives are trained on all current OKI products.
They can answer your questions regarding:
Locations of sales and service dealers
Installation of your machine
Usage/normal maintenance of your machine
Error message interpretation/solutions
Parts and supplies identication
Consumer relations
Note: Customer Support Representatives are not trained
to provide assistance with the use of commercial
software packages. Please consult your software
user’s manual for times and availability of their
support.
•
•
•
•
•
•
•
•
•
•
•
•
•
•

5 - English
Regulatory Information
ENERGY STAR®
Oki Data has determined that this
MFP model meets the ENERGY STAR
guidelines for energy efciency. Look for
the ENERGY STAR logo on your printer.
Year 2000 Compliance
This product is Year 2000 Compliant. It contains
information technology that accurately processes date and
time data between the years 1999 and 2000, and carries
no issue for the September 9, 1999 (9999) programming
concern. This product, when used in combination with
products purchased from other manufacturers, whose
products properly exchange data and time information, will
accurately process the date and time.
Federal Communications Commission (FCC)
Declaration of Conformity
Product Identication
Product Name: MC160n MFP
Model No.: N35002A
Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Administrative Council for Terminal Attachment
Requirements for End Users
This device has been granted a registration number by the
Administrative Council for Terminal Attachment (ACTA),
under Part 68 and ACTA rules and regulations for direct
connection to the telephone lines. In order to comply
with these FCC rules, the following instructions must be
carefully read and applicable portions followed completely.
This equipment complies with Part 68 of FCC rules and
the requirements adopted by the ACTA. On the back
of the equipment is a label that contains, among other
information, a product identier in the format US:
AAAEQ##TXXXX. If requested, this information may
need to be supplied for the telephone.
The following USOC jacks may be used with this equip-
ment: RJ11C.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
1.
2.
3.
1.
2.
3.
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is de-
signed to be connected to a compatible modular jack
that is also compliant. See installation instructions for
details.
The REN is used to determine the quantity of devices
which may be connected to the telephone line. Ex-
cessive RENs on the telephone line may result in the
devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs should not
exceed ve (5.0). To be certain of the number of de-
vices that may be connected to the line, as determined
by the total RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN for
this product is part of the product identier that has the
format US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g., 03 is a
REN of 0.3). For earlier products, the REN is separately
shown on the label.
If the equipment, MC160n MFP, causes harm to the
telephone network, the telephone company will notify
you in advance that temporary discontinuance of service
may be required. But if advance notice isn’t practical,
the telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to le
a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facili-
ties, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens,
the telephone company will provide advance notice in
order for you to make the necessary modications to
maintain uninterrupted service.
If trouble is experienced with this equipment (MC160n
MFP), please contact the following for repair and/or
warranty information:
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mount Laurel, N.J. 08054-4620
Telephone:[phone] or
(800)-OKIDATA (800-654-3282)
If the equipment is causing harm to the telephone
network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
This equipment contains no user serviceable parts.
Please contact Oki Data for service.
This equipment cannot be used on public coin service
provided by the telephone company. Connection to Par-
ty Line Service is subject to state tariffs. Contact your
state Public Utility Commission, Public Service Commis-
sion, or Corporate Commission for information.
If your home has specially wired alarm equipment con-
nected to the telephone line, ensure the installation of
this MC160n MFP does not disable your alarm equip-
ment. If you have questions about what will disable
alarm equipment, consult your telephone company or a
qualied installer.
FCC Telephone Consumer Protection Act
The Telephone Consumer Protection Act of 1991 makes
it unlawful for any person to use a computer or other
electronic device, including FAX machines, to send any
message unless such message clearly contains in a margin
at the top or bottom of each transmitted page or on the
4.
5.
6.
1.
2.
3.

6 - English
rst page of the transmission, the date and time it is sent
and an identication of the business or other entity, or other
individual sending the message, and the telephone number
of the sending machine or such business, other entity, or
individual. (The telephone number provided may not be a
900 number or any other number for which charges exceed
local or long-distance transmission charges.)
To comply with this law, you must enter the following
information in your fax unit:
Date and time: see “Changing the Date and Time” under
Setting Your Terminal in the User’s Guide for instructions
on doing this.
Name and telephone number which identify the source of
your fax transmission: see Your fax number/your name
under Setting Your Terminal in the User’s Guide for
instructions on doing this.
FCC Radio Frequency Interference Statement for
120-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Plug the unit into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/television
technician for help.
Note: It is the responsibility of the user to obtain the
required shielded cable in order to ensure compliance
of this equipment with FCC regulations.
Changes or modications not expressly approved by Oki
Data may void your authority to operate this device.
California Requirement
Perchlorate Warning Applicable to Lithium Batteries
Sold and/or Distributed in California
Perchlorate Material: special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Industry Canada (IC) Radio Interference
Statement for 120-Volt Models
This Oki Data apparatus complies with the Class B limits for
radio interference as specied in the IC Radio Interference
Regulations.
•
•
•
•
•
•
•

7 - English
Material Safety Data Sheet
# 58395801
Black Toner: P/N 44250716
For more information, contact Oki Data at: 2000 Bishops Gate
Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information: call 1-800-654-3282; US and Canada
only.
Emergency First Aid Procedures _______
Toner inhaled.
Remove person to fresh air. Seek medical attention.
Toner swallowed (ingested)
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out mouth
and give one or two glasses of water or milk to drink.
Toner gets in the eyes.
Flush eyes with large quantities of cool water for 15 minutes,
keeping the eyelids open with ngers. If necessary, seek
medical attention.
Toner gets on the skin.
Wash toner off the skin with plenty of cool water and soap. If
necessary, seek medical attention.
Note: Small amounts of toner on skin or clothing can easily
be removed with soap and cold water. Hot water
makes toner harder to remove.
Hazardous Ingredients ______________
Carbon Black (1-10% by weight)
CAS#: 1333-86-4
OSHA TWA: 10 mg/m
3
ACGIH TLV: 10 mg/m
3
Other Major Ingredients (non-hazardous):
Styrene Acrylic Resin (75-85% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Wax 10-20% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Amorphous Silica (1-10% by weight)
CAS#: 7631-86-9
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Physical Data ______________________
Physical State: Solid.
Melting/Freezing Point: Not available.
Boiling Point: Not applicable.
PH: Not applicable.
Vapor Pressure: Not applicable.
Vapor Density (Air=1): Not applicable.
Evaporation Rate (Butyl Acetate=1): Not applicable.
Specic Gravity (H
2
O=1): 1.2
Solubility in Water: Insoluble in water.
Solubility in Solvents: Not available.
Coefcient of water/oil Distribution: Not available.
Appearance and Odor: Black powder, Almost odorless
Odor Threshold: Not available.
Fire and Explosion Hazard Data ________
Minimal re hazard. Large quantities may cause risk of dust
explosion.
Flash Point (Method Used): Not applicable.
Flammable Limits
Lower Explosive Limit: Not available.
Upper Explosive Limit: Not available.
Auto-Ignition Temperature: Not available.
Explosion Data
Sensitivity to Mechanical Impact: Not available.
Sensitivity to Static Discharge: Not available.
Extinguishing Media: CO
2
, water spray, foam and dry
chemical.
Special Fire Fighting Procedures: Fight re from upwind
position. Avoid inhalation of smoke or gases. Wear self-
contained breathing apparatus.
Hazardous Combustion Products: Not available.
Toxicological Properties______________
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.
Effects of Acute Exposure:
Ingestion: LD
50
: >2.500 (Rat)
Dermal: LD
50
: Not available.
Inhalation: LC
50
: >5.10 (Rat, 4 hour)
Eye Irritation: Non-Irritant (Rabbit)
Skin Irritation: Non-Irritant (Rabbit)
Exposure Limits: Not available.
Irritancy: Not available.
Sensitivity: Not available.
Effects of Chronic Exposure: No lung changes at all in the
lowest exposure level (1 mg/m
3
), the most relevant level
to potential human exposures. A minimal to mild degree
of brosis was noted in 22% of the animals at the middle
exposure level (4 mg/m
3
), and a mild to moderate degree
of brosis was observed in 92% of the rats at the highest
exposure level (16 mg/m
3
). The lung changes observed in
the higher exposure groups are interpreted in terms of “lung
overloading”, a series of generic responses to the presence
of large quantities of respirable, insoluble and relatively
benign dusts retained for extended time periods in the lungs.
Lung tumor frequency was unchanged among rats exposed
to toner at the three exposure levels, and for air-only control
rats.

8 - English
Carcinogenicity
IARC
Carbon Black: Group 2B, “Possible Carcinogen.“
NTP: No components are listed.
OSHA: Carbon black is designated hazardous according to
OSHA 29 CFR 1910.1200.
Reproductive Toxicity: Not available.
Teratogenicity: Not available.
Mutagenicity: Negative (AMES Test).
Name of Toxicoligically Synergistic Products: Not
available.
Reactivity Data ____________________
Stability: Stable except above 200°C (392°F).
Conditions to Avoid: Electric discharge, throwing into re.
Polymerization: Will not occur.
Hazardous Decomposition or Byproducts: CO, CO
2
, NO
x
and smoke.
Incompatibility: Not available.
Preventive Measures ________________
Personal Protective Equipment
Respiratory Protection: Not normally required. For large
spills, use dust respirator and goggles during cleanup.
Protective Gloves and/or Eye Protection: Not normally
required. For large spills, use rubber gloves and safety
goggles during cleanup.
Engineering Controls
Ventilation: Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic Practices:
None.
Spill Cleanup
Small Spills
Remove sources of ignition.
Carefully clean up the spill with a wet cloth, avoiding
inhalation of ne dust.
Large Spills
Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
Wear protective gear: respirator, rubber gloves, safety
goggles.
Vacuum the spill, then wipe up remainder with a wet
cloth.
Waste Disposal
Vacuum or sweep material and place in a bag and hold for
waste disposal. Use vacuum equipped with High Efciency
Particulate Air (HEPA) lter. Vacuum should be electrically
bonded and grounded to dispel static electricity. To avoid
dust generation, do not sweep dry.
Follow appropriate federal, state, and local regulations.
1.
2.
1.
2.
3.
•
•
Precautions
Precautions for Handling or Storage: Do not breathe dust.
Avoid contact with eyes.
Other Precautions: None.
Shipping Information
Special Shipping Information: Non hazardous. Handle
container carefully to avoid shock. Do not drop. Keep dry.
UN Number: None.
Hazards Class: None.
User’s Responsibility ________________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect of
your operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation.
Preparation Date of MSDS ____________
Date: October 1, 2009.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: [phone]
Fax: [phone]
http://www.okiprintingsolutions.com
my.okidata.com

9 - English
Material Safety Data Sheet
# 58395701
Cyan Toner: P/N 44250711, 44250715
For more information, contact Oki Data at: 2000 Bishops Gate
Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information: call 1-800-654-3282; US and Canada
only.
Emergency First Aid Procedures _______
Toner inhaled.
Remove person to fresh air. Seek medical attention.
Toner swallowed (ingested)
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out mouth
and give one or two glasses of water or milk to drink.
Toner gets in the eyes.
Flush eyes with large quantities of cool water for 15 minutes,
keeping the eyelids open with ngers. If necessary, seek
medical attention.
Toner gets on the skin.
Wash toner off the skin with plenty of cool water and soap. If
necessary, seek medical attention.
Note: Small amounts of toner on skin or clothing can easily
be removed with soap and cold water. Hot water
makes toner harder to remove.
Hazardous Ingredients ______________
No hazardous ingredients present.
Other Major Ingredients (non-hazardous):
Styrene Acrylic Resin (75-85% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Wax (10-20% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Organic Pigment (1-10% by weight)
CAS#: 147-14-8
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Amorphous Silica (1-10% by weight)
CAS#: 7631-86-9
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Titanium Dioxide (<1% by weight)
CAS#: 13463-67-7
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Physical Data ______________________
Physical State: Solid.
Melting/Freezing Point: Around 125°C (275°F) (Softening
Point).
Boiling Point: Not available.
PH: Not available.
Vapor Pressure: Not available.
Vapor Density (Air=1): Not available.
Evaporation Rate (Butyl Acetate=1): Not available.
Specic Gravity (H
2
O=1): 1.2
Solubility in Water: Insoluble in water.
Solubility in Solvents: Not available.
Coefcient of water/oil Distribution: Not available.
Appearance and Odor: Cyan powder, no odor.
Odor Threshold: Not available.
Fire and Explosion Hazard Data ________
Minimal re hazard. Large quantities may cause risk of dust
explosion.
Flash Point (Method Used): Not applicable.
Flammable Limits
Lower Explosive Limit: Not available.
Upper Explosive Limit: Not available.
Auto-Ignition Temperature: Not available.
Explosion Data
Sensitivity to Mechanical Impact: Not available.
Sensitivity to Static Discharge: Not available.
Extinguishing Media: In case of small re, use CO
2
. In case
of large re, shut off air by spraying with water or foam.
Special Fire Fighting Procedures: Fight re from upwind
position. Avoid inhalation of smoke or gases. Wear self-
contained breathing apparatus.
Hazardous Combustion Products: Not available.
Toxicological Properties______________
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.
Effects of Acute Exposure:
Ingestion: LD
50
: >2,500 (Rat)
Dermal: LD
50
: Not available.
Inhalation: LC
50
: >5.08 (Rat, 4 hour)
Eye Irritation: Minimal Irritant (Rabbit)
Skin Irritation: Non-Irritant (Rabbit)
Exposure Limits: Not available.
Irritancy: Not available.
Sensitivity: Non sensitizer (Guinea pig)
Effects of Chronic Exposure: Prolonged inhalation of
excessive dust may cause lung damage. It is attributed
to “lung overloading”, a generic response to excessive
amounts of any dust retained in the lungs for a prolonged
interval. Use of this product, as intended, does not result
in inhalation of excessive dust. In a study in rats by chronic
inhalation exposure to a typical toner, a mild to moderate
degree of lung brosis was observed in 92% of rats in
the high concentration(16 mg/m
3
) exposure group, and a
minimal to mild degree of brosis was noted in 22% of the

10 - English
animals in the middle (4 mg/m
3
) exposure group. But no
pulmonary change was reported in the lowest (1 mg/m
3
)
exposure group, the most relevant level to potential human
exposures.
Carcinogenicity
IARC: No components are listed.
NTP: No components are listed.
OSHA: No components are listed.
Reproductive Toxicity: Not available.
Teratogenicity: Not available.
Mutagenicity: Negative (AMES test)
Name of Toxicoligically Synergistic Products: Not
available.
Reactivity Data ____________________
Stability: Stable except above 200°C (392°F).
Conditions to Avoid: Electric discharge, throwing into re.
Polymerization: Will not occur.
Hazardous Decomposition or Byproducts: CO, CO
2
, NO
x
and smoke.
Incompatibility: Not available.
Preventive Measures ________________
Personal Protective Equipment
Respiratory Protection: Not normally required. For large
spills, use dust respirator and goggles during cleanup.
Protective Gloves and/or Eye Protection: Not normally
required. For large spills, use rubber gloves and safety
goggles during cleanup.
Engineering Controls
Ventilation: Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic Practices:
None.
Spill Cleanup
Small Spills
Remove sources of ignition.
Carefully clean up the spill with a wet cloth, avoiding
inhalation of ne dust.
Large Spills
Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
Wear protective gear: respirator, rubber gloves, safety
goggles.
Vacuum the spill, then wipe up remainder with a wet
cloth.
Waste Disposal
Vacuum or sweep material and place in a bag and hold for
waste disposal. Use vacuum equipped with High Efciency
Particulate Air (HEPA) lter. Vacuum should be electrically
bonded and grounded to dispel static electricity. To avoid
dust generation, do not sweep dry.
Follow appropriate federal, state, and local regulations.
1.
2.
1.
2.
3.
•
•
Precautions
Precautions for Handling or Storage: Do not breathe dust.
Avoid contact with eyes.
Other Precautions: None.
Shipping Information
Special Shipping Information: Non hazardous. Handle
container carefully to avoid shock. Do not drop. Keep dry.
UN Number: None.
Hazards Class: None.
User’s Responsibility ________________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect of
your operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation.
Preparation Date of MSDS ____________
Date: October 1, 2009.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: [phone]
Fax: [phone]
http://www.okiprintingsolutions.com
my.okidata.com

11 - English
Material Safety Data Sheet
# 58395601
Magenta Toner: P/N 44250710, 44250714
For more information, contact Oki Data at: 2000 Bishops Gate
Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information: call 1-800-654-3282; US and Canada
only.
Emergency First Aid Procedures _______
Toner inhaled.
Remove person to fresh air. Seek medical attention.
Toner swallowed (ingested)
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out mouth
and give one or two glasses of water or milk to drink.
Toner gets in the eyes.
Flush eyes with large quantities of cool water for 15 minutes,
keeping the eyelids open with ngers. If necessary, seek
medical attention.
Toner gets on the skin.
Wash toner off the skin with plenty of cool water and soap. If
necessary, seek medical attention.
Note: Small amounts of toner on skin or clothing can easily
be removed with soap and cold water. Hot water
makes toner harder to remove.
Hazardous Ingredients ______________
No hazardous ingredients present.
Other Major Ingredients (non-hazardous):
Styrene Acrylic Resin (70-80% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Wax (10-20% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Organic Pigment 1 (1-10% by weight)
CAS#: 147-14-8
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Organic Pigment 2 (1-10% by weight)
CAS#: 147-14-8
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Amorphous Silica (1-10% by weight)
CAS#: 7631-86-9
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Titanium Dioxide (<1% by weight)
CAS#: 13463-67-7
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Physical Data ______________________
Physical State: Solid.
Melting/Freezing Point: Around 125°C (275°F) (Softening
Point).
Boiling Point: Not available.
PH: Not available.
Vapor Pressure: Not available.
Vapor Density (Air=1): Not available.
Evaporation Rate (Butyl Acetate=1): Not available.
Specic Gravity (H
2
O=1): 1.2.
Solubility in Water: Insoluble in water.
Solubility in Solvents: Not available.
Coefcient of water/oil Distribution: Not available.
Appearance and Odor: Magenta powder, almost odorless.
Odor Threshold: Not available.
Fire and Explosion Hazard Data ________
Minimal re hazard. Large quantities may cause risk of dust
explosion.
Flash Point (Method Used): Not applicable.
Flammable Limits
Lower Explosive Limit: Not available.
Upper Explosive Limit: Not available.
Auto-Ignition Temperature: Not available.
Explosion Data
Sensitivity to Mechanical Impact: Not available.
Sensitivity to Static Discharge: Not available.
Extinguishing Media: In case of small re, use CO
2
. In case
of large re, shut off air by spraying with water or foam.
Special Fire Fighting Procedures: Fight re from upwind
position. Avoid inhalation of smoke or gases. Wear self-
contained breathing apparatus.
Hazardous Combustion Products: Not available.
Toxicological Properties______________
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.
Effects of Acute Exposure:
Ingestion: LD
50
: >2,500 (Rat)
Dermal: LD
50
: Not available.
Inhalation: LC
50
: >4.77 (Rat, 4 hour)
Eye Irritation: Minimal Irritant (Rabbit)
Skin Irritation: Non-Irritant (Rabbit)
Exposure Limits: Not available.
Irritancy: Not available.
Sensitivity: Non sensitizer (Guinea pig)
Effects of Chronic Exposure: Prolonged inhalation of
excessive dust may cause lung damage. It is attributed
to “lung overloading”, a generic response to excessive
amounts of any dust retained in the lungs for a prolonged
interval. Use of this product, as intended, does not result

12 - English
in inhalation of excessive dust. In a study in rats by chronic
inhalation exposure to a typical toner, a mild to moderate
degree of lung brosis was observed in 92% of rats in the
high concentration (16 mg/m
3
) exposure group, and a
minimal to mild degree of brosis was noted in 22% of the
animals in the middle (4 mg/m
3
) exposure group. But no
pulmonary change was reported in the lowest (1 mg/m
3
)
exposure group, the most relevant level to potential human
exposures.
Carcinogenicity
IARC: No components are listed.
NTP: No components are listed.
OSHA: No components are listed.
Reproductive Toxicity: Not available.
Teratogenicity: Not available.
Mutagenicity: Negative (AMES test)
Name of Toxicoligically Synergistic Products: Not
available.
Reactivity Data ____________________
Stability: Stable except above 200°C (392°F).
Conditions to Avoid: Electric discharge, throwing into re.
Polymerization: Will not occur.
Hazardous Decomposition or Byproducts: CO, CO
2
, NO
x
and smoke.
Incompatibility: Not available.
Preventive Measures ________________
Personal Protective Equipment
Respiratory Protection: Not normally required. For large
spills, use dust respirator and goggles during cleanup.
Protective Gloves and/or Eye Protection: Not normally
required. For large spills, use rubber gloves and safety
goggles during cleanup.
Engineering Controls
Ventilation: Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic Practices:
None.
Spill Cleanup
Small Spills
Remove sources of ignition.
Carefully clean up the spill with a wet cloth, avoiding
inhalation of ne dust.
Large Spills
Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
Wear protective gear: respirator, rubber gloves, safety
goggles.
Vacuum the spill, then wipe up remainder with a wet
cloth.
Waste Disposal
Vacuum or sweep material and place in a bag and hold for
waste disposal. Use vacuum equipped with High Efciency
Particulate Air (HEPA) lter. Vacuum should be electrically
1.
2.
1.
2.
3.
•
bonded and grounded to dispel static electricity. To avoid
dust generation, do not sweep dry.
Follow appropriate federal, state, and local regulations.
Precautions
Precautions for Handling or Storage: Do not breathe dust.
Avoid contact with eyes.
Other Precautions: None.
Shipping Information
Special Shipping Information: Non hazardous. Handle
container carefully to avoid shock. Do not drop. Keep dry.
UN Number: None.
Hazards Class: None.
User’s Responsibility ________________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect of
your operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation.
Preparation Date of MSDS ____________
Date: October 1, 2009.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: [phone]
Fax: [phone]
http://www.okiprintingsolutions.com
my.okidata.com
•

13 - English
Material Safety Data Sheet
# 58395501
Yellow Toner: P/N 44250709, 44250713
For more information, contact Oki Data at: 2000 Bishops Gate
Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information: call 1-800-654-3282; US and Canada
only.
For more information, contact Oki Data at: 2000 Bishops Gate
Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information: call 1-800-654-3282; US and Canada
only.
Emergency First Aid Procedures _______
Toner inhaled.
Remove person to fresh air. Seek medical attention.
Toner swallowed (ingested)
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out mouth
and give one or two glasses of water or milk to drink.
Toner gets in the eyes.
Flush eyes with large quantities of cool water for 15 minutes,
keeping the eyelids open with ngers. If necessary, seek
medical attention.
Toner gets on the skin.
Wash toner off the skin with plenty of cool water and soap. If
necessary, seek medical attention.
Note: Small amounts of toner on skin or clothing can easily
be removed with soap and cold water. Hot water
makes toner harder to remove.
Hazardous Ingredients ______________
No hazardous ingredients present.
Other Major Ingredients (non-hazardous):
Styrene Acrylic Resin (75-85% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Wax (10-20% by weight)
CAS#: Trade Secret.
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Organic Pigment (1-10% by weight)
CAS#: 147-14-8
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Amorphous Silica (1-10% by weight)
CAS#: 7631-86-9
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Titanium Dioxide (<1% by weight)
CAS#: 13463-67-7
OSHA TWA: Trade Secret.
ACGIH TLV: Trade Secret.
Physical Data ______________________
Physical State: Solid.
Melting/Freezing Point: Around 125°C (275°F) (Softening
Point).
Boiling Point: Not available.
PH: Not available.
Vapor Pressure: Not available.
Vapor Density (Air=1): Not available.
Evaporation Rate (Butyl Acetate=1): Not available.
Specic Gravity (H
2
O=1): 1.2
Solubility in Water: Insoluble in water.
Solubility in Solvents: Not available.
Coefcient of water/oil Distribution: Not available.
Appearance and Odor: Yellow powder, almost odorless.
Odor Threshold: Not available.
Fire and Explosion Hazard Data ________
Minimal re hazard. Large quantities may cause risk of dust
explosion.
Flash Point (Method Used): Not applicable.
Flammable Limits
Lower Explosive Limit: Not available.
Upper Explosive Limit: Not available.
Auto-Ignition Temperature: Not available.
Explosion Data
Sensitivity to Mechanical Impact: Not available.
Sensitivity to Static Discharge: Not available.
Extinguishing Media: In case of small re, use CO
2
. In case
of large re, shut off air by spraying with water or foam.
Special Fire Fighting Procedures: Fight re from upwind
position. Avoid inhalation of smoke or gases. Wear self-
contained breathing apparatus.
Hazardous Combustion Products: Not available.
Toxicological Properties______________
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.
Effects of Acute Exposure:
Ingestion: LD
50
: >2,500 (Rat)
Dermal: LD
50
: Not available.
Inhalation: LC
50
: >5.57 (Rat, 4 hour)
Eye Irritation: Minimal Irritant (Rabbit)
Skin Irritation: Non-Irritant (Rabbit)
Exposure Limits: Not available.
Irritancy: Not available.
Sensitivity: Non sensitizer (Guinea pig)
Effects of Chronic Exposure: Prolonged inhalation of
excessive dust may cause lung damage. It is attributed
to “lung overloading”, a generic response to excessive
amounts of any dust retained in the lungs for a prolonged
interval. Use of this product, as intended, does not result
in inhalation of excessive dust. In a study in rats by chronic

14 - English
inhalation exposure to a typical toner, a mild to moderate
degree of lung brosis was observed in 92% of rats in the
high concentration (16 mg/m
3
) exposure group, and a
minimal to mild degree of brosis was noted in 22% of the
animals in the middle (4 mg/m
3
) exposure group. But no
pulmonary change was reported in the lowest (1 mg/m
3
)
exposure group, the most relevant level to potential human
exposures.
Carcinogenicity
IARC: No components are listed.
NTP: No components are listed.
OSHA: No components are listed.
Reproductive Toxicity: Not available.
Teratogenicity: Not available.
Mutagenicity: Negative (AMES test)
Name of Toxicoligically Synergistic Products: Not
available.
Reactivity Data ____________________
Stability: Stable except above 200°C (392°F).
Conditions to Avoid: Electric discharge, throwing into re.
Polymerization: Will not occur.
Hazardous Decomposition or Byproducts: CO, CO
2
, NO
x
and smoke.
Incompatibility: Not available.
Preventive Measures ________________
Personal Protective Equipment
Respiratory Protection: Not normally required. For large
spills, use dust respirator and goggles during cleanup.
Protective Gloves and/or Eye Protection: Not normally
required. For large spills, use rubber gloves and safety
goggles during cleanup.
Engineering Controls
Ventilation: Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic Practices:
None.
Spill Cleanup
Small Spills
Remove sources of ignition.
Carefully clean up the spill with a wet cloth, avoiding
inhalation of ne dust.
Large Spills
Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
Wear protective gear: respirator, rubber gloves, safety
goggles.
Vacuum the spill, then wipe up remainder with a wet
cloth.
Waste Disposal
Vacuum or sweep material and place in a bag and hold for
waste disposal. Use vacuum equipped with High Efciency
Particulate Air (HEPA) lter. Vacuum should be electrically
bonded and grounded to dispel static electricity. To avoid
1.
2.
1.
2.
3.
•
dust generation, do not sweep dry.
Follow appropriate federal, state, and local regulations.
Precautions
Precautions for Handling or Storage: Do not breathe dust.
Avoid contact with eyes.
Other Precautions: None.
Shipping Information
Special Shipping Information: Non hazardous. Handle
container carefully to avoid shock. Do not drop. Keep dry.
UN Number: None.
Hazards Class: None.
User’s Responsibility ________________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect of
your operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation.
Preparation Date of MSDS ____________
Date: October 1, 2009.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: [phone]
Fax: [phone]
http://www.okiprintingsolutions.com
my.okidata.com
•

15 - Français
Informations sur la sécurité,
Modèles de 120 volts
Votre produit OKI a été conçue avec soin pour vous fournir
des années de rendement sûr et able. Comme pour tout
matériel électrique, un certain nombre de précautions de
base doivent être observées pour vous protéger de toute
blessure ou éviter tout dommage à le produit.
Lisez attentivement les directives d’installation et
d’utilisation fournies.
Conservez tous les documents pour ns de référence
future.
Lisez et observez les avertissements et directives des
étiquettes apposés sur le produit.
Débranchez le produit avant de la nettoyer. Utilisez
uniquement un chiffon humide; n’utilisez pas de
nettoyants liquides ou en aérosol.
Placez le produit sur une surface stable et solide. Sur
une surface instable, le produit peut tomber et être
endommagée. Évitez toute surchauffe de le produit.
Ne la placez pas sur une surface souple, comme une
couverture, un divan ou un coussin. Les aérateurs
pourraient être obstrués et provoquer une surchauffe de
le produit.
Protégez le produit contre la surchauffe. Vériez
qu’aucun aérateur n’est obstrué. Ne placez pas le
produit sur une source de chaleur (p. ex., radiateur ou
grille de chauffage) ou à proximité de celle ci. Protégez
le produit contre les rayons du soleil.
Utilisez toujours le produit dans un endroit bien ventilé.
Prévoyez assez d’espace autour de le produit pour
assurer une ventilation adéquate et un accès facile aux
bacs à papier. Si vous placez le produit dans une armoire
d’une quelconque nature, assurez-vous qu’elle est bien
ventilée.
N’utilisez pas le produit à proximité d’un point d’eau.
Évitez de renverser quelque liquide que ce soit sur le
produit.
Assurez-vous que la source d’alimentation correspond
aux exigences indiquées à l’arrière de le produit. En
cas de doute, communiquez avec votre détaillant ou
fournisseur d’électricité.
Ne branchez pas ce produit dans un système
d’alimentation sans coupure. Pour plus d’information,
contactez Oki Data au 1 800 OKI-DATA.
Pour des raisons de sécurité, le produit possède
une prise à trois broches de mise à la terre. Elle ne
s’adapte qu’à une prise murale reliée à la terre. Si
vous ne pouvez pas la brancher, votre prise de courant
est sans doute un ancien modèle sans prise de terre.
Communiquez avec un électricien pour la remplacer par
une prise mise à la terre. N’utilisez pas d’adaptateur
pour contourner la mise à la terre.
•
•
•
•
•
•
•
•
•
•
•
Le produit doit être installée à proximité d’une prise de
courant aisément accessible.
Évitez d’endommager le cordon d’alimentation. Évitez de
posez quoi que ce soit sur le cordon d’alimentation ou
de le placer dans une zone de passage. Si le câble est
endommagé ou efloché, remplacez-le immédiatement.
Si vous utilisez une rallonge électrique ou une barre
d’alimentation avec le produit, assurez-vous que
l’ampérage nécessaire à l’ensemble de l’équipement
relié est inférieur à l’ampérage maximum pris en
charge par la rallonge. L’ampérage maximum de tout
équipement branché sur une seule ligne électrique ne
doit généralement pas dépasser 15 ampères.
Importante! Un câble téléphonique comportant des ls
de calibre 26 AWG ou plus gros doit être utilisé avec cet
équipement.
N’enfoncez aucun objet dans les fentes de ventilation
situées sur les côtés de ll produit, au risque d’être
électrocuté ou de provoquer un incendie.
À l’exception de l’entretien de routine décrit dans la
documentation, n’effectuez aucune réparation sur le
produit. L’ouverture du capot peut vous exposer à des
risques d’électrocution ou autres.
N’effectuez aucun réglage autre que ceux indiqués
dans la documentation. Vous pourriez provoquer
des dommages à l’appareil nécessitant de lourdes
réparations. La documentation fournie contient les
informations requises pour faire réparer votre produit
par des techniciens qualiés Oki Data.
Si vous constatez le moindre signe indiquant le
fonctionnement inadéquat de le produit ou que celle-
ci a été endommagée, débranchez-la immédiatement
et observez ensuite la procédure décrite dans la
documentation fournie pour faire réparer le produit.
Vériez notamment les éléments suivants :
Le câble d’alimentation est endommagé ou efloché.
Du liquide a été renversé dans le produit, ou le produit a
été en contact avec de l’eau.
Le produit est tombée ou son boîtier a été endommagé.
Le produit ne fonctionne pas normalement après avoir
suivi les directives d’utilisation.
Information additio nnelle sur la sécurité
pour l’équipement de télécommunications
Lors de l’utilisation de votre équipement téléphonique,
prenez les précautions de sécurité nécessaires pour réduire
les risques d’incendie, d’électrocution et de blessures,
incluant les suivantes :
N’utilisez pas ce produit près de l’eau, par exemple près
d’une baignoire, d’un évier ou d’une cuve de lessive,
dans un sous-sol humide ou près d’une piscine.
Évitez d’utiliser un téléphone (autre qu’un modèle
sans l) durant un orage. Il y a un faible risque
d’électrocution dû à la foudre.
N’utilisez pas le téléphone pour signaler une fuite de gaz
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Informations de sécurité, de garantie, et de
réglementation

16 - Français
à proximité de la fuite.
Utilisez seulement le l d’alimentation et les piles
indiqués dans ce manuel. Ne jetez pas les piles au feu
car elles pourraient exploser. Vériez les règlements
locaux pour savoir s’il y a des instructions spéciales pour
l’élimination.
CONSERVEZ CES INSTRUCTIONS.
•

17 - Français
Garantie limitée, États-Unis et
Canada
États-Unis et Canada uniquement
Oki Data Americas, Inc. (Oki Data) garantit que
l’imprimante MC160n MFP (ci-après nommée l’« le
Produit ») ne présente aucun défaut de matériel ni de
fabrication, et qu’elle remédiera à tout défaut de ce type
conformément aux conditions de la présente Garantie
limitée.
Oki Data réparera ou, à sa discrétion, remplacera toute
pièce défectueuse de l’Produit avec la même ou son
équivalent fonctionnel, et ce, sans frais, pendant une
période de un (1) an à partir de la date d’achat de
l’Imprimante.
La présente Garantie limitée s’applique uniquement à
l’acheteur d’origine du produit sous garantie. La présente
Garantie limitée n’est pas transférable. La présente
Garantie limitée ne couvre pas les consommables et les
fournitures, notamment cartouches de toner, tambours
d’impression, rubans, fusibles, etc.
Échange le lendemain
États-Unis et Canada uniquement
Oki Data offre un service d’échange le lendemain de
l’Produit dans le cadre de la présente Garantie limitée.
Le service d’échange le lendemain est seulement offert
aux États-Unis et au Canada et ne comprend pas le
remplacement ou la réparation des consommables ou
des fournitures de l’Produit.
Si vous désirez utiliser le service d’échange le
lendemain, composez le 1 800 654-3282 (1 800 OKI-
DATA) : notre personnel qualié tentera de résoudre
votre problème par téléphone. S’il est déterminé que
l’Produit est défectueuse, une Produit de remplacement
vous sera envoyée par messagerie le lendemain. Ayez
votre carte de crédit en main car notre représentant
aura besoin de cette information. Vous recevrez une
Produit de remplacement le jour ouvrable suivant — ou
au plus tard le deuxième jour ouvrable.
Vous devez retourner l’Produit défectueuse à Oki
Data en l’emballant dans l’emballage de l’Produit de
remplacement L’Produit à retourner doit être prête
lorsque le représentant de Oki Data passera la cueillir,
soit dans un délai de deux (2) jours ouvrables suivant
la réception de l’Produit de remplacement. Si vous ne
respectez pas cette procédure, le prix de l’Produit de
remplacement vous sera facturé.
An d’éviter d’endommager l’Produit durant l’expédition,
retirer l’assemblage toner/tambour avant de l’expédier.
Si vous ne le faites pas, des frais de nettoyage et/ou
de réparation peuvent être facturés sur votre carte de
crédit.
Lorsque le service d’échange le lendemain est utilisé,
l’Produit retournée devient la propriété de Oki Data,
une fois celle-ci cueillie par Oki Data ou un de ses
représentants. Les Produits de remplacement peuvent, à
la discrétion d’Oki Data, être neuves ou remises à neuf :
l’Produit de remplacement devient la propriété du client
lorsque le service de messagerie choisi par Oki Data a
cueilli l’Produit retournée.
L’unité de remplacement et elle est garantie durant
trente (30) jours ou durant le reste de la période de
garantie de l’unité retournée, selon le délai le plus long.
Pour formuler une demande de réparation ou une
réclamation en vertu de la présente Garantie limitée,
communiquez avec le centre de réparation agréé Oki
Data de votre voisinage ou avec Oki Data en composant
le 1-800-654-3282 (1-800-OKI-DATA) ou www.
okiprintingsolutions.com.
Toute demande de réparation ou réclamation formulée au
titre de la présente Garantie limitée doit être accompagnée
d’un reçu indiquant la date d’achat, le nom du revendeur, le
modèle ainsi que le numéro de série de l’Produit.
La présente Garantie limitée ne s’applique à toute
Produit ayant subit une usure normale, et ne s’applique
pas si l’Produit a été endommagé suite à un emploi
abusif, à un mauvais usage, à un emploi injustié, à un
incident, au stockage inapproprié ou à une installation
physique inadéquate ou à une utilisation/stockage dans
un environnement inapproprié, ou si ce dommage est le
résultat d’une intervention ou d’une modication apportée
par un centre de réparation quelconque autre qu’un centre
de réparation agréé Oki Data.
IL N’EXISTE AUCUNE GARANTIE EXPRESSE AUTRE
QUE CELLES PRÉSENTÉES ET DÉCRITES CI-DESSUS.
AUCUNE GARANTIE EXPRESSE OU IMPLICITE,
Y COMPRIS MAIS SANS S’Y LIMITER, TOUTE
GARANTIE IMPLICITE DE QUALITÉ MARCHANDE
OU D’ADAPTABILITÉ À QUELQUE UTILISATION
QUE CE SOIT, NE POURRA SE PROLONGER AU-DELÀ
DES PÉRIODES DE GARANTIE CORRESPONDANTES
DÉCRITES CI-DESSUS.
Certains États et/ou provinces n’autorisant pas la limitation
de durée des garanties implicites, les limitations décrites
ci-dessus peuvent ne pas vous concerner.
EN AUCUN CAS OKI DATA OU SES SOCIÉTÉS
AFFILIÉES NE SERONT TENUES RESPONSABLES
PAR UN ACHETEUR OU TOUTE AUTRE PERSONNE DE
DOMMAGES SPÉCIAUX, ACCESSOIRES, PUNITIFS,
ACCIDENTELS OU CONSÉCUTIFS INCLUANT LES
PERTES DE GAINS, LES REVENUS COMMERCIAUX, LA
BONNE VOLONTÉ OU LES ÉCONOMIES ANTICIPÉES,
EN RELATION AVEC OU DÉCOULANT DE L’ACHAT OU
DE L’UTILISATION DU PRODUIT OKI DATA, QU’ILS
SURVIENNENT SOUS CONTRAT OU PRÉJUDICE, QUE
L’ACHETEUR AIT OU NON INFORMÉ OKI DATA D’UNE
TELLE POSSIBILITÉ OU VRAISEMBLANCE DE TELS
DOMMAGES.
Certains états ou provinces n’autorisent pas l’exlusion ou la
limitation relative aux dommages accidentels ou indirects,
auquel cas l’exclusion précédente ne s’applique pas.
AVIS DE GARANTIE SUPPLÉMENTAIRES POUR
TOUS LES ACHETEURS A L’EXCEPTION DES
CONSOMMATEURS :
LORSQUE TOUTE PRODUIT OKI DATA DOIT ÊTRE
ACHETÉE PAR UNE PERSONNE ET QUE CETTE

18 - Français
PRODUIT OKI DATA N’EST PAS IDENTIFIÉE COMME
ÉTANT UN « BIEN DE CONSOMMATION » (TEL QUE
DÉFINI DANS LE CODE COMMERCIAL UNIFORME
ADOPTÉ DANS L’ÉTAT OU LA PROVINCE D’ACHAT
OU DANS TOUTE AUTRE LOI APPLICABLE), OKI
DATA DÉCLINE EXPRESSÉMENT TOUTE GARANTIE
IMPLICITE, INCLUANT MAIS SANS S’Y LIMITER,
LES GARANTIES IMPLICITES DE QUALITÉ
MARCHANDE ET D’ADAPTABILITÉ POUR TOUTE
UTILISATION QUE CE SOIT.
Pour obtenir des renseignements supplémentaires
concernant les services offerts en vertu de la présente
Garantie limitée pour le Canada et les États-Unis, contactez
le revendeur de produits Oki Data auprès duquel le produit
a été acheté, directement Oki Data en composant le 1-800-
654-3282 (1-800-OKI-DATA) ou www.okiprintingsolutions.
com ou l’un des centres de réparations indiqués ci-après.
Espagnol uniquement : composez le 1 856 222-5276.
Canada uniquement : composez le 1 [phone].
États Unis
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Téléphone : 1-800-654-3282
Télécopieur : 1-856-222-5247
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East,
Unit 1
Mississauga, Ontario
Canada L4W 4M8
Téléphone : 1-800-654-3282
Télécopieur : 1-905-238-4421
La présente Garantie limitée s’applique à ce Produit
Oki Data. Toutefois, la procédure à suivre pour obtenir
de l’assistance peut varier à l’extérieur des États-Unis
continentaux. Veuillez communiquer avec le revendeur
Oki Data pour obtenir des renseignements concernant les
services sous garantie.
Cettte garantie vous accorde des droits légaux spéciques,
auxquels peuvent s’ajouter d’autres droits pouvants varier
d’un état à l’autre ou d’une province à l’autre.

19 - Français
Service et soutien, États-Unis et
Canada
États-Unis et Canada seulement
Oki Data s’engage résolument à donner entière satisfaction
à ses clients. Si vous rencontrez un problème que la
documentation ne peut résoudre, communiquez avec l’une
des ressources Oki Data pour obtenir du service après-
vente ou de l’assistance.
Fournisseurs de services agréés Oki Data
Pour obtenir la liste détaillée et mise à jour des centres de
service après-vente agréés d’Oki Data :
États-Unis : accédez à www.okiprintingsolutions.com.
États-Unis et Canada : composez le 1 800 654-3282 (1
800 OKI-DATA).
Pour contacter Oki Data
États Unis
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Téléphone : 1-800-654-3282
Télécopieur : 1-856-222-5247
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East,
Unit 1
Mississauga, Ontario
Canada L4W 4M8
Téléphone : 1-800-654-3282
Télécopieur : 1-905-238-4421
Distributeurs et service après-vente
Renseignez-vous auprès du magasin où vous avez acheté
l’appareil ou communiquez avec Oki Data pour connaître
l’adresse du revendeur ou du centre de réparation agréé
Oki Data le plus près de chez vous.
Les prix et frais minimaux peuvent varier.
Une preuve d’achat est requise pour les réparations
sous garantie. Veillez à conserver tous vos documents
d’achat.
Services automatisés
Références rapides
Pour obtenir rapidement des références concernant un
revendeur ou des services après-vente, incluant les
produits, les pièces et les consommables, communiquez
avec nous en tout temps :
1-800-654-3282 (1 800 OKI-DATA)
www.okiprintingsolutions.com
Votre centre de solutions personnalisées
Vous pouvez facilement créer votre propre Centre
de solutions personnalisées qui vous fournira les
informations les plus récentes d’Oki spéciques à
votre produit, notamment :
•
•
•
•
•
•
•
nouvelles sur les produits;
guides;
pilotes et utilitaires;
che de données de santé-sécurité; base de
connaissances pouvant être interrogée;
et plus encore!
Il suft de prendre quelques minutes pour le congurer
pour consulter votre Centre de solutions personnalisées et
obtenir les informations les plus récentes, et ce, n’importe
quand.
Visitez dès aujourd’hui http://MY.OKIDATA.com.
Représentants du Service à la clientèle
1 800 654-3282 (1 800 OKI-DATA)
Les représentants du Service à la clientèle sont disponibles
24 heures sur 24, 7 jours sur 7. Ayez sous la main le
numéro de modèle ainsi que le numéro de série du
produit. N’oubliez pas de communiquer avec nous depuis
un téléphone se trouvant à proximité de l’appareil pour
pouvoir décrire avec précision la nature du problème et
observer les suggestions du représentant du service à
la clientèle. Les représentants sont formés sur tous les
produits OKI courants, et peuvent répondre à vos questions
concernant :
l’emplacement des distributeurs et des centres de
réparation;
l’installation de votre appareil
Utilisation et l’entretien normal de votre appareil
Interprétation des messages d’erreur et les solutions
Identication des pièces et fournitures
Relations avec la clientèle
Note : Les représentants du Service à la clientèle ne
sont pas formés pour vous aider sur l’utilisation
des logiciels en vente dans le commerce. Veuillez
consulter votre manuel d’utilisateur du logiciel pour
connaître les services offerts par son fabricant.
•
•
•
•
•
•
•
•
•
•
•

20 - Français
Informations réglementaires
ENERGY STAR®
Oki Data a déterminé que le modèl MFP
répondent aux directives de ENERGY
STAR en matière d’économie d’énergie.
Vous trouverez le logo ENERGY STAR sur
votre imprimante.
Conformité an 2000
Le présent produit OKI est conforme à l’an 2000. Il
incorpore une technologie de l’information qui traite
précisément les données de date et d’heure entre les
années 1999 et 2000, et ne présente aucun problème
pour la programmation du 9 septembre 1999 (9999). Ce
produit, s’il est utilisé en combinaison avec des produits
d’autres fabricants et qui échangent correctement les
informations de date et d’heure, traitera précisément la
date et l’heure.
Federal Communications Commission (FCC)
Déclarations de conformité
Identication du produit
Nom de produit : MC160n MFP
N˚ de modèle: N35002A
Déclaration
Cet appareil a été déclaré conforme aux normes de la
partie 15 de la réglementation FCC. OL’utilisation de
cet appareil est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire d’interférences
et (2) l’utilisateur de l’appareil doit être prêt à accepter
toute interférence radioélectrique reçue, même si ces
interférences sont susceptibles de compromettre le
fonctionnement de l’appareil.
Partie responsable
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
CC Administrative Council for Terminal Attachment
- Exigences pour les utilisateurs naux
La Federal Communications Commission a délivré à cet
appareil un numéro d’enregistrement, conformément aux
règlements et dispositions de la Partie 68 sur la connexion
directe aux lignes téléphoniques.Ce dispositif a obtenu
un numéro d’enregistrement par l’Administrative Council
for Terminal Attachment (ACTA) selon la partie 68 et les
normes et réglementations de l’ACTA pour la connexion
directe aux lignes téléphoniques. An de respecter les
règlements de la FCC, les directives suivantes doivent être
lues attentivement et leurs parties applicables doivent être
appliquées dans leur intégralité.
Cet équipement est conforme à la partie 68 des
règlements de la FCC ainsi qu’aux exigences adop-
1.
2.
3.
1.
tées par l’ACTA. Une étiquette apposée à l’arrière
de l’appareil contient, entre autres informations, un
numéro d’identication de produit sous le format US :
AAAEQ##TXXXX. Ces informations doivent être com-
muniquées sur demande de la compagnie téléphonique.
Cet appareil peut être utilisé avec les prises homo-
loguées USOC suivantes : RJ11C.
La che et la prise utilisées pour connecter l’équipement
au câblage d’un réseau ou d’une installation télépho-
nique doivent être conformes aux règlements et exi-
gences applicables de la partie 68 de la FCC et des
exigences adoptées par l’ACTA. Un câble téléphonique
et une che modulaire conformes sont fournis avec
le produit. Il est conçu pour être branché à une prise
modulaire compatible également conforme. Voyez les
instructions d’installations pour les détails.
Le REN sert à déterminer le nombre d’appareils pouvant
être connectés à une même ligne téléphonique. Il est
possible que la sonnerie de plusieurs dispositifs ne soit
pas déclenchée par un appel entrant lorsqu’un nombre
total d’IES branchés à la ligne téléphonique est excessif.
Dans la plupart des zones (mais pas toutes), la somme
des REN ne doit pas dépasser cinq (5,0). Pour être
certain du nombre d’appareils pouvant être connecté à
une ligne, soit le total des REN, contactez la compagnie
téléphonique locale. Pour les produits approuvés après
le 23 juillet 2001, le REN dU produit est intégré au
numéro d’identication du produit sous le format US:
AAAEQ##TXXXX. Les chiffres représentés par ## con-
stituent le REN sans le point décimal (p. ex. : 03 signie
un REN de 0,3). Pour les produits antérieurs à cette
date, le REN est indiqué séparément sur l’étiquette.
Si l’appareil, MC160n MFP, nuit au réseau téléphonique,
la compagnie téléphonique vous en avertira à l’avance
qu’une interruption temporaire du service peut être
nécessaire. Si la notication préalable n’est pas pos-
sible, cette compagnie avertira le client dans les plus
brefs délais. Vous serez aussi informé de votre droit à
déposer une plainte auprès de la FCC si vous le jugez
nécessaire.
La compagnie téléphonique peut modier ses instal-
lations, son équipement, ses opérations ou ses procé-
dures, ce qui risque d’affecter le fonctionnement de
l’appareil. Dans ce cas, celle-ci vous enverra une noti-
cation préalable an que vous puissiez faire les modi-
cations qui s’imposent an de conserver un service
ininterrompu.
En cas de problème avec cet appareil (MC160n MFP),
vous pouvez obtenir des informations de réparation
et/ou de garantie à l’adresse suivante :
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mount Laurel, N.J. 08054-4620
Telephone:[phone] ou
(800)-OKIDATA (800-654-3282)
Si l’équipement cause des problèmes au réseau
téléphonique, la compagnie de téléphone peut demander
à l’utilisateur de débrancher l’équipement jusqu’à ce que
le problème soit résolu.
Cet appareil ne contient aucune pièce pouvant être
entretenue par l’utilisateur. Pour toute réparation ou
entretien, veuillez contacter Okidata.
Cet appareil n’est pas utilisable sur les taxiphones in-
2.
3.
4.
5.
6.
7.
8.
9.