Olympus HiQ+ User manual

HiQ+ Components: The HiQ+ Monopolar Laparoscopic Hand Instruments consists of three modular components and 2 sealing caps.
STEP 1
Insert the jaw insert into the insulated shaft
STEP 2
Anchor the jaw insert with your left hand then rotate the shaft clockwise a half-turn to lock
the jaw insert in place.
HiQ+ Laparoscopic Instruments
Assembly Guide
Jaw Insert
Handle
Insulated Shaft

Olympus is a registered trademark of Olympus Corporation, Olympus America Inc., and/or their affiliates.
136 Turnpike Road, Southborough, MA 01772
©2018 Olympus America Inc. All rights reserved.
Printed in USA OAIENE0418QRG25815
STEP 5
When properly inserted, close the handle to lock the system in place.
STEP 3
Completely open the handle.
STEP 4
Fully insert the proximal end of the jaw insert into the handle. If the jaw insert becomes dislodged
from the shaft, disassemble all components and restart the assembly process.