Olympus RecMic User manual

RecMic Configuration Tool
Installation Guide

Contents
Trademarks······················································································································································3
1Introduction················································································································4
2Prepare for installation ·····························································································5
2.1 System requirements····································································································································6
3Install RecMic Configuration Tool············································································7
4Administrative features···························································································11
4.1 Configure user settings for RecMic Configuration Tool······························································· 11
4.1.1 Create a CustomConfig.xml······················································································································ 12
4.2 Command line installation ······················································································································ 13
4.2.1 Language options········································································································································· 13
4.2.2 MSI properties for RecMic Configuration Tool·················································································· 14
4.2.3 Sample command lines······························································································································ 14
5Support contacts······································································································16

Trademarks
•Microsoft, Windows, and PowerPoint are trademarks or registered trademarks of Microsoft Corporation
in the United States and/or other countries.
•Nuance, Dragon, the Dragon logos, and Dragon NaturallySpeaking are trademarks or registered
trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries.
•All other company and product names mentioned in this document are trademarks or registered
trademarks of their respective owners.

1Introduction
RecMic Configuration Tool is software that supports your workflow by using Olympus RecMic to control
desktop applications. With this software, you can configure RecMic settings and assign functions that control
applications to RecMic buttons.
RecMic Configuration Tool supports the following devices:
RecMic 2 (RM series)
•RM-4110S
•RM-4100S
•RM-4015P
•RM-4010P
•RM-4000P
RecMic 1 (DR series)
•DR-2300
•DR-2200
•DR-2100
•DR-1200
This installation guide provides information on installing RecMic Configuration Tool.
For information about the features of RecMic Configuration Tool, refer to the online help after installation.
This guide uses Windows 10 to explain operating procedures. Depending on the version
of your OS, the screen display may be different.

2Prepare for installation
Before installing RecMic Configuration Tool:
•Make sure your computer meets the system requirements.
•Install pending Windows updates, and then restart the computer.
•Exit all open applications.

2.1 System requirements
Component
Requirement
OS
Microsoft®Windows®7
•Ultimate/Enterprise/Professional SP1 (x86/x64)
Microsoft®Windows®8.1
•Enterprise/Pro (x86/x64)
Microsoft®Windows®10
•Enterprise/Pro (x86/x64)
CPU
Microsoft®Windows®7: 1 GHz or higher
Microsoft®Windows®8.1: 1 GHz or higher
Microsoft
®
Windows
®
10: 1 GHz or higher
Memory
Microsoft®Windows®7: 1 GB or more (x86)/2 GB or more (x64)
Microsoft®Windows®8.1: 1 GB or more (x86)/2 GB or more (x64)
Microsoft
®
Windows
®
10: 2 GB or more
Hard disk space 30 MB or more
(A separate space is required to install .NET Framework.)
USB port
One or more free ports
.NET Framework
.NET Framework 4.6
Speech recognition
software
Dragon speech recognition software
•Dragon Professional/Legal Individual v14
•Dragon Professional/Legal Individual v15
RecMic Configuration Tool does not support virtualized environments.

3Install RecMic Configuration Tool
This topic provides a step-by-step procedure for installing RecMic Configuration Tool on a single computer.
You must have administrator privileges to install RecMic Configuration Tool.
To install RecMic Configuration Tool
1. Double-click setup.exe in the RCT_Installer folder to install. If the User Account Control
dialog box appears, click Yes.
2. In the language selection dialog box, select the language that you want to use during
installation, and click OK.
If you are prompted to install Microsoft .NET Framework 4.6, click Install. Please wait until this
installation is complete.
3. After the InstallShield Wizard starts, click Next.

4. On the License Agreement page, accept the license agreement to continue the installation,
and then click Next.
5. On the Destination Folder page, change the installation folder if required, and then click
Next.

6. On the Additional Options page, select options that you want to use, and then click Next.
Start automatically on Windows logon
Click this check box to start RecMic Configuration Tool automatically on Windows logon.
Create a shortcut on the desktop
Click this check box to create a desktop shortcut to start RecMic Configuration Tool.

7. On the Ready to Install the Program page, click Install.
The installation of RecMic Configuration Tool starts. This may take a few minutes.
8. When the installation process is complete, the completion page appears. Click Finish to close
the InstallShield Wizard.

4Administrative features
This chapter is intended for administrators that install RecMic Configuration Tool to multiple client computers.
4.1 Configure user settings for RecMic Configuration Tool
This topic describes how to use the CustomConfig.xml to configure user default settings before you install
RecMic Configuration Tool to your clients.
Configuring a user setting in this method is not necessarily permanent. It merely configures
the initial default settings. The user can change settings after RecMic Configuration Tool is
installed.
To configure and deploy user default settings
1. Copy all the files and folders from the RCT_Installer folder to a shared folder on the network.
For example, copy the files to \\Server\\Share\\RCT.
2. Create a CustomConfig.xml by using RecMic Configuration Tool.
For more information, refer to “Create a CustomConfig.xml”.
3. Copy the CustomConfig.xml to \\Server\\Share\\RCT. Make sure that the
CustomConfig.xml is in the same location as RecMicConfiguration.msi.
4. On the user’s computer, install RecMic Configuration Tool by running setup.exe from
\\Server\\Share\\RCT.
CustomConfig.xml is distributed to the computer. The settings for application control feature are
applied when the user first runs RecMic Configuration Tool. In addition, the device settings are
automatically uploaded to the device when the user first connects it to the computer.
To install RecMic Configuration Tool, users must be local administrators on their computers.
You can use computer startup scripts to install RecMic Configuration Tool if users do not
have administrator privileges.

4.1.1 Create a CustomConfig.xml
To create a CustomConfig.xml
1. Install RecMic Configuration Tool on an administrator’s computer.
For more information, refer to “Install RecMic Configuration Tool”.
2. On the Start menu, click Olympus RecMic Configuration Tool.
3. On the Device configuration tab and/or the Application control tab, change options as
needed.
For more information, refer to the RecMic Configuration Tool online help.
4. On the Application menu, click Export profile.
5. Select the configurations you want to export, and then click OK.
6. In the Export Profile dialog box, select the folder in which to save this file.
7. In the File name box, type CustomConfig.xml, and then click Save.

4.2 Command line installation
The command line installation is useful if you want to install RecMic Configuration Tool across a network to
multiple computers. This section describes information on how to use command line options.
4.2.1 Language options
When the installation of RecMic Configuration Tool is started from setup.exe, you can select the language
that you want to use during installation. This is also used as the default display language of RecMic
Configuration Tool.
You can specify the language when you use the command line installation.
Syntax
•To install using setup.exe, use the following syntax:
setup.exe /L<Language ID>
•To install using msiexec, use the following syntax:
msiexec /i RecMicConfiguration.msi TRANSFORMS=<path to MST>
The table below lists parameters for language options.
Language
Language ID
MST file name
English
1033
1033.mst
Français
1036
1036.mst
Deutsch
1031
1031.mst
Español
1034
1034.mst
Русский
1049
1049.mst
Svenska
1053
1053.mst
Čeština
1029
1029.mst

4.2.2 MSI properties for RecMic Configuration Tool
This topic describes the msiexec properties that are available for RecMic Configuration Tool.
Syntax
•To install using setup.exe, use the following syntax:
setup.exe /v"<PROPERTY>=<VALUE>"
•To install using msiexec, use the following syntax:
msiexec /i RecMicConfiguration.msi <PROPERTY>=<VALUE>
Option
Description
DEST=<installation_folder>
Specifies a full path to the installation folder.
By default, RecMic Configuration Tool is installed in:
For 64-bit:
C:\Program Files(x86)\OLYMPUS\RecMicConfigurationTool
For 32-bit:
C:\Program Files\OLYMPUS\RecMicConfigurationTool
AUTOSTART={YES | NO}
Specifies whether to start RecMic Configuration Tool
automatically on Windows logon.
The default is YES.
DESKTOPSHORTCUT
={
YES
|
NO
} Specifies whether to create a shortcut on the desktop.
The default is YES.
Names or paths that include spaces must be enclosed in quotation marks.
4.2.3 Sample command lines
This topic describes sample command lines.
Where \\Server\\Share\\RCT is the path of RecMic Configuration Tool installation package.
If you use the /qn option, no dialogs appear during installation.
It prevents the
installation from waiting for user interactions.
Command lines for setup.exe
•To install RecMic Configuration Tool with default settings:
"\\Server\Share\RCT\setup.exe" /s /v"/qn"
•To install RecMic Configuration Tool with the language option (the following command specifies the
default language to German):

"\\Server\Share\RCT\setup.exe" /L1031 /s /v"/qn"
•To install RecMic Configuration Tool without the AUTOSTART option (default is YES):
"\\Server\Share\RCT\setup.exe" /s /v"AUTOSTART=NO /qn"
Command lines for msiexec
•To install using setup.exe, use the following syntax:
msiexec /i "\\Server\Share\RCT\RecMicConfiguration.msi" /qn
•To install RecMic Configuration Tool with the language option (the following command specifies the
default language to German):
msiexec /i "\\Server\Share\RCT\RecMicConfiguration.msi" TRANSFORMS=1031.mst /qn
•To install RecMic Configuration Tool without the AUTOSTART option (default is YES):
msiexec /i "\\Server\Share\RCT\RecMicConfiguration.msi" AUTOSTART=NO /qn

5Support contacts
Inquiries regarding malfunctions
When making an inquiry, please let us know the following items of information and a detailed description of
the problem.
•Type of PC (manufacturer and model name)
•Memory capacity
•Hard disk space
•OS and version
•Connected peripheral devices
For malfunctions and other problems, please contact your dealer or distributor.
Other support
Various kinds of information, including product specifications, connection with PCs, OS supporting status, and
Q & A, are available on our Web site. For the latest information, visit
https://www.olympus-global.com/network/
The information provided may be subject to change without notice.

Copyright©2017 OLYMPUS CORPORATION