Omer More V565 Guide

Tipo di punto
Type of fastener
Manuale d’uso, manutezione
e parti di ricambio Parte 2
Use, maintenance
and spare parts manual Part.2
195MV565_V565_140916
0
Indice di modifica
Upgrade number
V565
WIRE
COLLATION
Dati tecnici
Lubrificazione consigliata:
Olio per utensili pneumatici
Applicazioni:
Sostegni, fabbricazione pallet/casse, travature,
coperture, strutture, sotto pavimento.
Sistema di funzionamento:
Grilletto-Duo (azionamento sequenziale singolo /
azionamento a contatto)
Caricamento
1.Sbloccare la chiusura per aprire porta e caricatore.
2.Regolare il livello del caricatore in modo che i chiodi
siano allineati con la linea guida.
3.Caricare i chiodi dall’alto del caricatore dentro il
sistema di alimentazione.
4.Chiudere il caricatore e assicurarsi che il
chiavistello sia chiuso correttamente.
Technical data
Recommended lubrications:
Pneumatic tool oil
Applications & suitability:
Cedar & derwood siding, sub-flooring, boxes, crates
and other wooden assemblies.
Actuating system:
Combi-Trigger (single sequential actuation / contact
actuation)
Filling the magazine
1. Release latch to open the door and magazine.
2. Adjust the level of the magazine base so that the
nails will feed in line with guides.
3. Load nails onto pivot in the magazine and full
forward so that the nails are inserted into the feeder
mechanism.
4. On closing the magazine ensure the latch is closed
properly.
Misure impiegabili mm (inch)
Usable lenghts mm (inch)
Capacità caricatore n° punti
Magazine capacity No. of fasteners
Pressione d’esercizio bar (psi)
Working pressure bar (psi)
Consumo aria litri/colpo a 7 bar
Air consumption litres/shot at 7 bar
Peso kg
Weight kg
Dimensioni (AxBxH) mm
Dimensions mm
Pressione sonora
Max A-Weighted surface impulse sound pressure level
Potenza sonora emessa
Max A-Weighted impulse sound power level
Vibrazione
Vibration
32÷65
(1-1/4”÷2-9/16”)
250÷350
5÷8
(70÷115)
2,97
2,54
320x130x273
85,2 dBA
98,2 dBA
2
4,23 m/s
PLASTIC
COLLATION
Ø 5,4 ÷ 6,1
Head dia: .240”
65
2-9/16”
32
1-1/4”
Ø 2,3 ÷ Ø 2,5
Shank dia: .092” ÷ .099”
Gauge: 13 ÷ 12½
16°
Ø 2,3 ÷ Ø 2,5
Shank dia: .092” ÷ .099”
Gauge: 13 ÷ 12½
45
1-3/4”
65
2-9/16”
16°
Ø 5,4 ÷ Ø 6,2
Head dia: .212” ÷ .244”
Dati tecnici - Technical data
Dotazioni - Equipment
Via Foresto, 42 - 31058 SUSEGANA (TV) ITALY
Tel. [phone] Fax [phone]
e-mail: [e-mail] www.omer.it
omers.p.a.
cod. 195MV565

Parti di ricambio - Spare parts
195MV565_V565_140916
Indice di modifica
Upgrade number
V565 co d. 19 5MV 565
150393
0
Ref. No. Part No. Description
091 2MV565-A091 Feed Bumper
092 2MV565-A092 Feed Piston Cap
093 2MV565-A093 C-Ring
094 2MV565-A094 Protective Casing
095 2MV57-A054 End Cap
096 2MV57-A052 Filter
097 2MV57-A051 C-Ring
098 2MV57-A072 Spring Base
099 2MV565-A099 Magazine Case
100 2MV565-A100 Hex. Soc. Hd. Bolt
101 2MV565-A101 Washer
102 2MCN2970-A443 Magazine Shaft Pin
103 2MV57-A073 Spring
104 2MV80-A085 Spacer
105 2MV80-A084 Spring Base
106 2MV565-A106 Magazine Cover
107 2MCN2550-A214 Spring
108 2MV565-A108 Gasket
109 2MV565-A109 Pin
110 2MV57-A087 Pu Retainer
111 2MV80-A096 Dust Shield Plug
113 2MV565-A113 Spacer
120 2MV57-A100 Trigger Valve Assy
K100 2MV565-K100 Kit O-Ring
19
22
20
18
21
44
42
17
1
2
3
4
5
7
8
6
108
11
12
15
14
13
9
10
16
001 2MV57-A001 Counter Sunk Screw
002 2MV565-A002 Bush
003 2MV565-A003 Deflector
004 2MV565-A004 Filter
005 2MV565-A005 Filter
006 2MV565-A006 Cap
007 2MV565-A007 Hex. Soc. Hd. Bolt
008 2MV565-A008 Protection
009 2MCN3165-A113 Seal Gasket
010 2MV565-A010 Seal
011 2MCN3165-A108 Washer
012 2MCN3165-A109 Compression Spring
013 2MV565-A013 Hd. Valve Piston
014 2MCN3165-A112 O-Ring
015 2MCN3165-A111 O-Ring
016 2MCN3165-A115 Collar
017 2MV565-A017 Bumper
018 2MV57-A019 Cylinder Ring
019 2MV565-A019 O-Ring
020 2MCN2357-A123 O-Ring
021 2MV565-A021 Cylinder
022 2MV565-A022 Cylinder Spacer
023 2MV565-A023 Body
024 2MV57-A058 Roll Pin
025 2MV57-A050 Handle Grip
031 2MV565-A102 Dual Trigger Assy
032 2MV565-A032 Pin
033 2MV565-A033 Pu Retainer
034 2MV565-A034 O-Ring
035 2MV565-A035 Safety Rod
036 2MV565-A036 Safety Spring
037 2MV565-A037 Dafety Guide
038 2MV565-A038 Spiral Pins
039 2MCN3165-A436 Adjust Regulator
040 2MV565-A040 Safety Guide
041 2MV565-A041 Safety
042 2MV565-A042 Driver Unit
044 2MCN2357-A119 O-Ring
045 2MV565-A045 C-Ring
046 2MV565-A046 O-Ring
047 2MV565-A047 Adjust Regulator
048 2MCN2970-A211 Pin
049 2MV57-A067 O-Ring
050 2MV57-A070 Plunger Cap
051 2MV57-A069 O-Ring
052 2MV57-A084 Trigger Valve Head
053 2MV57-A065 Plunger
054 2MV57-A066 O-Ring
055 2MV57-A064 Spring
056 2MV57-A063 O-Ring
057 2MV57-A062 O-Ring
058 2MV57-A061 Valve Plunger
059 2MV57-A060 O-Ring
060 2MV565-A060 Pu Retainer
061 2MV565-A061 Pin
062 2MV565-A062 Spring
063 2MV565-A063 Feed Finger
064 2MCN2970-A416 Pu Retainer
065 2MV565-A065 Plunger
066 2MV565-A066 Pin
067 2MV565-A067 Nose Piece
068 2MV565-A068 Pin
069 2MV565-A069 Dusty Cover
070 2MV565-A070 Safety Cover
071 2MV565-A071 Door
072 2MV80-A036 Pin
073 2MV565-A073 Check Pawl
074 2MV565-A074 Spring
075 2MV80-A038 Spring
076 2MV565-A076 Check Pawl
077 2MV565-A077 Pin
078 2MCN3165-A428 Hex. Soc. Hd. Bolt
079 2MV565-A079 Latch
080 2MV565-A080 Latch Spring
081 2MV565-A081 Pin
082 2MV565-A082 Lock Nut
083 2MCN3165-A402 O-Ring
084 2MCN2357-A108 Hex. Soc. Hd. Bolt
085 2MV565-A085 O-Ring
086 2MV565-A086 Spring
087 2MV565-A087 Feed Piston
088 2MV565-A088 O-Ring
089 2MV565-A089 Feed Piston Spring
090 2MV565-A090 Feed Piston Spring
67
84
77
76
75
74
73
64
68
71
80
83
60
72
34
78
82
70
69
93
92
89
91
90
88
87
85
66
86
61
62
63
64
65
60
81
79
46
106
105
103
104
99
102
98
82
101
100
51
49
50
48
59
57
58
56
55
53
54
52
23
109
32
33
110
24
25
97 96 44 95
31
107
37
36
35
39
47
45
41
40
38
46
94
120
111
113
2 VM 56 5-K 100
Kit Guarnizioni / Kit O-Rings
K100