omnicharge Omni 40 User manual

www.omnicharge.co
1Power & Menu
Button
User Manual
BEFORE USING THE OMNI 40
Calibrate the battery
1. Fully discharge the Omnicharge until it
cannot be turned on. Press the Power
Button and you should see an empty
battery icon on the screen.
To ensure a correct battery readout, calibrate the battery when you first receive the product and
periodically in the future.
2. Fully charge your Omnicharge to 100% to
finish the calibration. Once you see a fully
charged battery icon, you can power the
Omnicharge back on.
Note: When not in use, the Omnicharge should be stored at full battery and fully charged at least
every 6 months to avoid over depletion. Failure to do so can cause the battery to malfunction
and is not covered by warranty.
BUTTON FUNCTIONS
PRIMARY CONTROLS
• Long press to power On
• Long press to power Off
• Left Button: On/Off AC Outlet
• Right Button: On/Off HUB
MENU CONTROLS
• Double press to enter the menu
• Quick press to select
SCREEN
OLED screen with real time metrics
1. Status Icons
2. Power Input (watts)
3. Battery Power Output (watts)
4. Battery Temperature
5. DC Output Voltage
6. Battery Percentage
7. Time Remaining
65.02 W
34.00 W 0.00 V
20.3 °C
100%60:00
AC DC
6
7
5
1
2
43
USB-C PORTS
MAX OUTPUT 150W
The USB-C ports are always on and need no configuration. Simply plug your USB-C device
into any USB-C port to start charging.
Note: The USB-C and DC port share the same power circuit and cannot be used
at the same time.
RECHARGING YOUR OMNICHARGE
Connect a USB-C wall charger and it will
automatically start recharging the Omni 40.
If the Omnicharge does not detect incoming
power, try to plug in your USB-C charger while
the Omnicharge is turned off.
1) FROM THE USB-C PORT
USB-C port max input: 90W
To charge from the barrel port make sure
you have a compatible charger.
The Omni 40 uses a common 5.5 x 2.5mm
connector and accepts voltages in the
5V-25V range.
2) FROM THE BARREL PORT
DC Input 5V - 25V, Up to 5A, Max 90W
The DC output feature allows you to directly output DC power through the barrel port. To use
this feature you will need to know the voltage and amperage of your device and have a
compatible cable.
DC PORT
MAX OUTPUT 5A - 100W
5V - 25V
WITH 0.1V ACCURACY
Enabling DC Output
.............................................................................................................................................................................................................................
Once active, a DC icon will appear on the screen.
DC
Omnicharge keeps 4 voltage presets. You can press and hold the power button while
selecting a preset to customize the voltage and amperage.
Step 1 Step 2 Step 3
Warning: Using the wrong voltage may damage your device.
2. When AC/HVDC is active, the
following icons should appear on the
screen
Note: 150V HVDC is recommended
if you are using a switch mode
power supply, such as laptop's AC
power adapter.
Check our support page at
www.omnicharge.co for more
detailed information.
AC HV
DC
AC output HVDC output
3. Power any device
.............................................................................................................................................................................................................................
.............................................................................................................................................................................................................................
1. Choose 120V AC/150V HVDC mode in the menu
AC OUTLET
MAX OUTPUT 100W
EU model
230v
US model
120v
USB-A PORTS
MAX OUTPUT 27W
To change the AC output mode, double press the Power
Button to enter the menu and select Wall Socket.
1. Choose whether the USB
output is ON or OFF by default.
USB-A Ports: Quick Charge QC3.0 compatible, 27W Max
USB-C Main Port (Port 2): 100W Max
USB-C Ports 1&3: 30W Max
AC wall charger
3 hours
Solar (up to 45W)
3-6 hours
Car power port (12V)
3-6 hours
Laptop adapter
3 hours
......................
......................
......................
POWER YOUR NEXT ADVENTURE
Up To 8 Charges
Smartphone
Up To 10 Charges
DSLR Camera
Up To 4 Charges
Tablet
Up To 4 Charges
Drone
Up To 2 Charge
15" Laptop
Up To 16 Charges
Action Cam
Omni 40
And so much more
CameraLaptop DroneTV Projector
2OLED
Screen
PASS-THROUGH CHARGING
Pass-through charging means that you input power to the Omnicharge while outputting power
to your device (passing the power through the Omnicharge). All Omnicharge products support
pass-through charging. This means that you can input power through the USB-C or DC port,
and output to the AC, USB-A.
Note: The USB-C and DC port share the same power circuit and cannot be used at the same time.
AC OUTPUT
Button
4
3HUB
Button
Note: All the remaining USB-C ports and USB-A ports can be used to transfer files from
smartphones, flash drives, cameras or other standard USB-A or USB-C devices.
HOW TO USE HUB MODE
USB-C PORT IN/OUT
Use the Omni 40 as a USB hub and transfer files between your smartphones, flash drives,
cameras or laptops.
1. Connect the USB-C/HUB port (in the
centre) to a USB-C port on your laptop .
USB-C / HUB port
2. Initiate HUB mode by short pressing
the HUB button (Right button), and a
HUB icon will appear on the screen.
HUB
Button
• Left Button: Move up
• Right Button: Move down
HUB

SCREEN ICONS
AC AC OUTPUT
AC outlet is activated.
HV
DC HVDC OUTPUT
HVDC (high voltage DC) is activated.
DC ADJUSTABLE DC OUTPUT
Adjustable DC output is activated.
USB OUTPUT
USB ports are turned on.
RECHARGING
Your Omnicharge is being charged.
OPTIMAL CHARGING
Charging at maximum power.
SOLAR CHARGING
Charging from solar power.
.....................................................................................................
LOW TEMPERATURE PROTECTION
Battery's temperature is too low,
the charging circuit is shut off.
OVERPOWER PROTECTION
Device is drawing too much power. Omnicharge
will limit or cut off the output power.
OVERHEATING PROTECTION
Battery temperature is too high. Omnicharge
will limit or cut off its input and output power.
OVERVOLTAGE PROTECTION
Barrel input voltage exceeds the 25V limit.
Input charging circuit is shut off.
LOW POWER PROTECTION
If output is higher than input and the battery is
empty. Omnicharge will cut power until a
sufficient battery level has been reached.
................
...........................................................................................................
................
...........................................................................................................
.....................................................................................................
................
................
................
.....................................................................................................
...........................................................................................................
.....................................................................................................
...........................................................................................................
2. WALL SOCKET
Choose whether the AC outlet
will output 120V AC or 150V
HVDC.
3. USB
4. SCREEN OFF TIMER
Set the screen auto shut-off time .
The default setting is 5 min.
1. DC OUT
Turn on DC output. Set the voltage
and amperage by long pressing
the power button.
MENU NAVIGATION
TECHNICAL SPECS
GENERAL
Weight: 1.39 lbs (1050 g)
Dimensions: 9.5” x 2.7” x 2.5”(24.3 x 7.1 x 6.5 cm)
Combined output all ports: 150W
AC PORT
120V AC, 60Hz, 100W Max US version
230V AC, 50Hz, 100W Max EU version
BATTERY CAPACITY
12 cells, 142Wh ([email protected])
38,400mAh
OPERATING ENVIRONMENT
Temperature 0°C-40°C
Humidity 30-70%
Altitude ≤ 2000m
USB-C
Bidirectional Input / Output charging
INPUT: USB-PD 5V3A, 9V3A, 12V3A,
12V3A, 15V3A, 20V5A, 90W Max
OUTPUT: (Main / Port 2)5V3A, 9V3A,
12V3A, 15V3A, 20V5A, 100W Max
(Port 1 & 3)5V3A, 9V3A, 12V3A, 30W Max
DC PORT
Bidirectional Input/output charging
INPUT: 5~25V, up to 5A, 90W Max
OUTPUT: 5~25V, up to 5A, 100W Max
USB-A OUTPUT
Port1: (Single) 5V3A, 9V2A, 12V1.5A 18W Max
Port2: (Both) 5V each, total 5V4.8A
6. TEMPERATURE
Choose whether the temperature is
displayed in celcius or fahrenheit.
5. AUTO SHUT DOWN
Set the power auto shut-off time.
The default setting is 5 min.
7. BUTTON LIGHT
Choose whether the button
lights are on or off. The default
setting is on.
8. TIME REMAINING
Choose whether the time
remaining is displayed.
10. FACTORY RESET
Reset the Omnicharge to
factory settings.
11. ABOUT
Findthe model name, capacity,
firmware version, andserial
number information here.
9. LANGUAGE
Choose the screen language.
FREQUENTLY ASKED QUESTIONS
1. Can I carry my Omni Ultimate+ with me on the plane?
This depends on the airline. Many airlines allow up to two batteries between 100Wh - 150Wh with airline
approval. In most cases this just means that you need to fill out a form at check-in. If you are unsure,
consult with your airline prior to travel.
2. Can I charge the Omnicharge while powering my devices?
Yes, this is known as pass-through charging. The Omni Ultimate+ can input power from either USB-C or
DC port, and can output from all other ports at the same time. The DC and USB-C port share a charging
circuit. When pass-through charging, only one USB-C port may be used at a time.
3. My Omnicharge is overheating while recharging.
Fast charging generates a lot of heat. When recharging immediately after a heavy discharge, you may
experience an OT (over temperature) warning. This is normal behavior, the Omnicharge will resume
charging once it has reached a functional temperature.
4. Can I charge my Omnicharge from a solar panel?
Yes, the Omni Ultimate+ can be recharged using most portable solar panels. Make sure your solar panel
falls within the specs of the DC barrel port (5v-25v).
5. Why is my Omnicharge outputting power when nothing is connected?
This is perfectly normal behavior. The passive power draw can vary from 0.2W-1.5W
and is required for the onboard circuits and display.
6. What is USB PD (Power Delivery)?
USB PD is a unified charging standard that uses standardized voltages which allows one universal
USB-C charger to power other PD compatible devices like laptops, tablets, or phones.
JOIN OUR COMMUNITY TODAY
And get one of these accessories:
Fast
Charger
USB-C
Cable
Car
Charger Protective
case
SCAN QR CODE
To register your Omni 40
and claim your free accessory.
Visit https://www.omnicharge.co/community © 2022 Omnicharge.
is a trademark of Omnicharge Inc.
MADE IN CHINA
SAFETY AND HANDLING
Read all instructions and cautions carefully before use to avoid personal injury or damage to the unit
and any connected products.
1. Handling
Set up your Omnicharge on a hard, stable work surface which allows for adequate air ventilation
around the power bank. The Omnicharge may be damaged if dropped, burned, punctured, crushed,
exposed to heat or moisture. Do not use a damaged Omnicharge as it may cause injury.
2. High Temperature
Do not store the device in high-temperature environments, including heat caused by intense sunlight
or other forms of heat. Do not the place device in excessively hot environments like cars or near fire.
3. Shock or Fire Hazard
Omnicharge products with AC output generate the same potentially lethal AC power as a normal
household wall outlet. Please use it carefully just like using a normal AC wall outlet. DO NO insert
foreign objects into outputs or ventilation holes.
4. DC Output
Omnicharge products with DC output operate on a specified voltage. Check your device
specifications for the operating voltage before use. Improper use of DC output may harm your
device.
5. Battery
Your Omnicharge is not user serviceable, do not attempt to replace or modify the battery yourself,
this may damage the battery which can cause overheating, fire or injury. Improperly replaced
batteries may present a risk of leakage, explosion and personal injury. Any manipulation to the unit or
its components will void all warranties.
6. Recycling
The battery in your device should be serviced or recycled by an authorized service provider, and must
be recycled or disposed of separately from household waste. Dispose of batteries according to your
local environmental laws and guidelines. If no laws or regulations govern, dispose of your
Omnicharge in a waste bin for electronics.
This product is meant for use only in conjunction with appropriate devices. Please consult your
device packaging to determine whether this product is compatible with your particular device. The
manufacturer is not responsible for any damages to any device incurred through the use of this
product.
The manufacturer shall not in any way be liable to you or to any third party for any damages you or
any third party may suffer as a result of use, intended or unintended, or misuse of this product in
conjunction with any device or accessory other than the appropriate device for which this product
is designed.
The manufacturer shall not be responsible for any damages you or any third party may suffer as a
result of misuse of this product as outlined above.
You are responsible for product use with an unintended device and any damages resulting from
such use. You agree to indemnify the manufacturer for any resulting injuries to any third party(ies).
................
.....................................................................................................
...........................................................................................................
All Omnicharge products have gone through quality inspection. If you find
your Omnicharge or any Omnicharge accessory is demonstrating any
abnormal behavior, immediately stop all product use and contact us at:
[email protected], or visit our help center at
https://support.omnicharge.co
CUSTOMER SUPPORT
OMNICHARGE ONE-YEAR LIMITED
MANUFACTURER’S WARRANTY
Omnicharge warrants that its hardware product shall be free from defects in materials and
workmanship for one (1) year beginning from the date of original retail purchase. Omnicharge
does not warrant against normal wear and tear, nor damage caused by accident or abuse.
See www.omnicharge.co/warranty for specific warranty information about your product and
procedures to act on a warranty claim. Omnicharge’s entire liability and your exclusive remedy
for any breach of warranty shall be at Omnicharge’s option, to repair or replace a functional
equivalent of the product. You may be required to furnish proof of purchase details when making
a claim under this warranty. Warranty protections are in addition to rights provided under local
consumer laws and may vary among countries, states and provinces. See the full warranty
information to know your consumer rights and the additional protections provided by this
product warranty.
www.omnicharge.co/warranty
Choose whether your USB-A
ports are On/Off at start.
The default setting is on.