Omron JX - 1 Quick guide

1JX
JX
Compact & Complete
• V/f controlled inverter
• Side by side mounting
• Built-in EMC filter
• Built-in RS-485 Modbus
• Overload detection function (150% during 60s)
•PID
• Micro-surge voltage suppression
• Automatic energy saving
• Emergency shut-off
• Second motor setting
• Auto carrier-frequency reduction
• PTC thermistor input
• Cooling fan switch control
• PC configuration tool: CX-Drive
• CE, UL, cUL, RoHS
Ratings
• 200 V Class single-phase 0.2 to 2.2 kW
• 200 V Class three-phase 0.2 to 7.5 kW
• 400 V Class three-phase 0.4 to 7.5 kW
System configuration
Choke
LCD 2 lines
Remote Operator
Remote Operator
Extansion Cable
* Only needed for 3 phase 200V or to comply C1 on 3 phase 400V models
Output Reactor
RJ45 - USB Cable
CX-Drive
CX-One
*
MCCB
JX
Filter
AC Reactor
Motor
Ground
Power
Supply
DC Reactor

2Frequency inverters
Type designation
200 V class
400 V class
Specifications
Single-phase: JX@AB002 AB004 AB007 AB015 AB022 ---
Three-phase: JX@A2002 A2004 A2007 A2015 A2022 A2037 A2055 A2075
Motor
kW1
1. Based on a standard 3-Phase standard motor.
Applicable motor capacity 0.2 0.4 0.75 1.5 2.2 3.7 5.5 7.5
Output
characteristics
Inverter capacity kVA 200 V 0.4 0.9 1.3 2.4 3.4 5.5 8.3 11.0
240 V 0.5 1.0 1.6 2.9 4.1 6.6 9.9 13.3
Rated output current (A) 1.4 2.6 4.0 7.1 10.0 15.9 24.0 32.0
Max. output voltage Proportional to input voltage: 0…240 V
Max. output frequency 400 Hz
Power
supply
Rated input voltage
and frequency
Single-phase 200…240 V 50/60 Hz
3-phase 200…240 V 50/60 Hz
Rated input current (A) 1.8 3.4 5.2 9.3 13.0 20.0 30.0 40.0
Allowable voltage
fluctuation -15%…+10%
Allowable frequency
fluctuation +5%
Built-in filter EMC filter (C1 single phase)
Braking torque
At short-time
deceleration
At capacitor
feedback
Approx. 50%
50% for
3-phase
20 to 40% for
1-phase
Approx 20% to 40% Approx 20%
Cooling method Self cooling Forced-air-cooling
Three-phase: JX@A4004 A4007 A4015 A4022 A4040 A4055 A4075
Motor
kW1
1. Based on a standard 3-Phase standard motor.
Applicable motor capacity 0.4 0.75 1.5 2.2 4.0 5.5 7.5
Output
characteristics
Inverter capacity kVA 380 V 0.9 1.6 2.5 3.6 5.6 8.5 10.5
480 V 1.2 2.0 3.1 4.5 7.1 10.8 13.3
Rated output current (A) 1.5 2.5 3.8 5.5 8.6 13.0 16.0
Max. output voltage Proportional to input voltage: 0…480 V
Max. output frequency 400 Hz
Power
supply
Rated input voltage
and frequency 3-phase 380…480 V 50/60 Hz
Rated input current (A) 2.0 3.3 5.0 7.0 11.0 16.5 20.0
Allowable voltage
fluctuation -15%…+10%
Allowable frequency
fluctuation +5%
Built-in filter EMC filter C2 class
Braking torque
At short-time
deceleration
At capacitor
feedback
Approx. 50% Approx. 20% to 40% Approx. 20%
Cooling method Self cooling Forced-air-cooling
JX series
A: Standard specs
JXAB002-EF
Voltage:
B: Single-phase 200 VAC
2: Three-phase 200 VAC
4: Three-phase 400 VAC
Max. applicable motor output
002: 0,2 kW
~
075: 7,5 kW
F: Built-in EMC Filter
E: Europe standard

JX 3
Commom specifications
Specifications
Model number
JX@Specifications
Control functions
Control methods Phase-to-phase sinusoidal modulation PWM (V/f)
Output frequency range 0.5..400 Hz
Frequency precision Digital set value: ±0.01% of the max. frequency
Analogue set value: ±0.4% of the max. frequency (25 ±10 ºC)
Resolution of frequency set value Digital set value: 0.1 Hz
Analogue set value: 1/1000 of maximum frequency
Resolution of output frequency 0.1Hz
Overload capability 150% rated output current for one minute
Frequency set value 0 to 10 VDC (10KΩ), 4 to 20mA (250Ω), frequency setting volume (selectable), RS485 Modbus
V/f Characteristics Constant/ reduced torque
Functionality
Inputs signals
FW (forward), RV (reverse), CF1 to CF4 (multi-step speed), JG (jogging), DB (external DC injection braking), SET (2nd func-
tion), 2CH (2-step acceleration/deceleration), FRS (free run), EXT (external trip), USP (USP function), SFT (soft lock), AT
(analog current input function selection), RS (reset), PTC (thermistor input), STA (3-wire startup), STP (3-wire stop), F/R (3-
wire forward/reverse), PID (PID selection), PIDC (PID integral reset), UP (UP of UP/DWN function), DWN (DWN of UP/DWN
function), UDC (data clear of UP/DWN function), OPE (forced OPE mode), ADD (frequency addition), F-TM (forced terminal
block), RDY (operation ready), SP-SET (special setting), EMR (emergency shutoff)
Output signals
RUN (signal during operation), FA1 (frequency arrival signal 1), FA2 (frequency arrival signal 2), OL (overload warning sig-
nal), OD (PID excess deviation signal), AL (alarm signal), DC (analog input disconnection detection signal), FBV (PID FB
status output), NDc (network error), LOG (logical operation result), ODc (communication option disconnected), LOC (light
load signal)
Standard functions
AVR function, V/f characteristic selection, upper/lower limit, 16-step speeds, starting frequency adjustment, jogging
operation, carrier frequency adjustment, PID control, frequency jump, analog gain/bias adjustment, S-shape acceleration/
deceleration, electronic thermal characteristics/level adjustment, retry function, simplified torque boost, trip monitor, soft lock
function, frequency conversion display, USP function, 2nd control function, motor rotation speed UP/DOWN, overcurrent
suppression function
Analogue inputs 2 analogue inputs 0 to 10V (20KΩ), 4 to 20mA (250Ω)
Accel/Decel times 0.01 to 3000s (line/curve selection), 2nd accel/decel setting available
Display Status indicator LED’s Run, Program, Power, Alarm, Power, Hz, Amps, Volume Led indicator
Digital operator: Available to monitor frequency reference, output current, output frequency
Protection functions
Motor overload protection Electronic Thermal overload relay and PTC thermistor input
Instantaneous overcurrent 180% of rated current
Overload 150% for 1 minute
Overvoltage 790V for 400V type and 395 for 200V type
Momentary power loss Following items are selectable: Alarm, 0 Hz start, frequency output at interruption, maximum frequency
Cooling fin overheat Temperature monitor and error detection
Stall prevention level Selectable level applicable only at constant speed or during acceleration and constant speed
Ground fault Detected at power-on
Power charge indication On when power is supplied to the control part
Ambient conditions
Degree of protection IP20
Ambient humidity 90% RH or less (without condensation)
Storage temperature -20 ºC..+65 ºC (short-term temperature during transportation)
Ambient temperature −10°C to 50°C (Both the carrier frequency and output current need to be reduced at over 40°C.)
Installation Indoor (no corrosive gas, dust, etc.)
Installation height Max. 1000 m
Vibration 5.9 m/s2(0.6G), 10 to 55 Hz (Complies with the test method specified in JIS C0040 (1999).)

4Frequency inverters
IP 20 type 0.2 to 7.5 kW
Rasmi footprint Filters
Filter only needed by the 1-phase 200V or 3-phase 400V to comply with C1 EMC class.
Dimensions
Voltage class Max. applicable
motor output kW Inverter model JX@Figure Dimensions in mm
W1 H1 W H D t1 D1 Weight
Single-phase
200 V
0.2 AB002 1 67 143 80 155 95.5
2.6
13 0.8
0.4 AB004 1109.5 27 0.9
0.75 AB007 2
98 176 110 189
130.5 28 1.5
1.5 AB015 2 157.5 6 55 2.3
2.2 AB022 2 2.4
Three-phase
200 V
0.2 A2002 1
67 143 80 155
95.5
2.6
13 0.8
0.4 A2004 1 109.5 27 0.9
0.75 A2007 1 132.5 50 1.1
1.5 A2015 2
98 176 110 189 157.5 6 55
2.2
2.2 A2022 2 2.4
3.7 A2037 2
5.5 A2055 2 164 235 180 250 167.5 1.6 77.5 4.2
7.5 A2075 2
Three-phase
400 V
0.4 A4004 2
98 176 110 189
130.5 2.6 28 1.5
0.75 A4007 2
157.5 6 55
2.3
1.5 A4015 2
2.42.2 A4022 2
4.0 A4040 2
5.5 A4055 2 164 235 180 250 167.5 1.6 77.5 4.2
7.5 A4075 2
Figure 1 Figure 2
6
5
5
W
H1
W1
H
t1
D1
1.9 D
H1
5
H
W1
W
5
6
t1
D1
D
1.9
Rasmi model Dimensions Weight
KG
W H L X Y M
1x200 V
AX-FIJ1006-RE 81 40 193 183 57 M4 0.5
AX-FIJ1010-RE 112 47 226 216 88 M4 0.6
AX-FIJ1026-RE 112 47 226 216 88 M4 0.8
3x200 V
AX-FIJ2006-RE 81 50 193 183 57 M4 1.0
AX-FIJ2020-RE 112 50 226 216 88 M4 1.3
AX-FIJ2040-RE 182 55 289 279 150 M5 2.3
3x400 V
AX-FIJ3005-RE 112 45 226 216 88 M4 0.9
AX-FIJ3011-RE 112 45 226 216 88 M4 1.1
AX-FIJ3020-RE 182 45 289 279 150 M4 1.7

JX 5
Input AC Reactor
DC Reactor
Output AC Reactor
Chokes
Voltage Reference Dimensions Weight
Kg
AB2 C2 D E F
200V
AX-RAI02800080-DE 120 70 120 80 52 5.5 1.78
AX-RAI00880175-DE 120 80 120 80 62 5.5 2.35
AX-RAI00350335-DE 180 85 190 140 55 6 5.5
400V
AX-RAI07700042-DE 120 70 120 80 52 5.5 1.78
AX-RAI03500090-DE 120 80 120 80 62 5.5 2.35
AX-RAI01300170-DE 120 80 120 80 62 5.5 2.50
Voltage Reference Dimensions Weight
Kg
AB C D E F G H
200V
AX-RC21400016-DE
84 113
96
101 66 5 7.5 2
1.22
AX-RC10700032-DE
AX-RC06750061-DE 105 1.60
AX-RC03510093-DE
AX-RC02510138-DE 116 1.95
AX-RC01600223-DE 108 135 124 120 82 6.5
9.5
9.5 3.20
AX-RC01110309-DE 120 152 136 135 94 7 - 5.20
AX-RC00840437-DE 146 6.00
400V
AX-RC43000020-DE
84 113
96
101 66 5 7.5 2
1.22
AX-RC27000030-DE 105 1.60
AX-RC14000047-DE
AX-RC10100069-DE 116 1.95
AX-RC06400116-DE 108 135 133 120 82 6.5
9.5
9.5 3.70
AX-RC04410167-DE 120 152 136 135 94 7 - 5.20
AX-RC03350219-DE 146 6.00
Voltage Reference Dimensions Weight
Kg
AB2 C2 D E F
200V
AX-RAO11500026-DE 120 70 120 80 52 5.5 1.78
AX-RAO07600042-DE 120 70 120 80 52 5.5 1.78
AX-RAO04100075-DE 120 80 120 80 62 5.5 2.35
AX-RAO03000105-DE 120 80 120 80 62 5.5 2.35
AX-RAO01830180-DE 180 85 190 140 55 6 5.5
AX-RAO01150220-DE 180 85 190 140 55 6 5.5
AX-RAO00950320-DE 180 85 205 140 55 6 6.5
400V
AX-RAO16300038-DE 120 70 120 80 52 5.5 1.78
AX-RAO11800053-DE 120 80 120 80 52 5.5 2.35
AX-RAO07300080-DE 120 80 120 80 62 5.5 2.35
AX-RAO04600110-DE 180 85 190 140 55 6 5.5
AX-RAO03600160-DE 180 85 205 140 55 6 6.5
X
H
YW
Ø m
L
Ø d
Reference D
diameter
Motor
KW
Dimensions Weight
Kg
L W H X Y m
AX-FER2102-RE 21 < 2.2 85 22 46 70 - 5 0.1
AX-FER2515-RE 25 < 15 105 25 62 90 - 5 0.2

6Frequency inverters
Standard connections
Terminal Block Specifications
Installation
Terminal Name Function (signal level)
R/L1, S/L2, T/N/L3
Main circuit power supply input Used to connect line power to the drive.
Drives with single-phase 200 V input power use only terminals R/L1 and N (T/L3), terminal
S/L2 is not available for these units
U/T1, V/T2, W/T3 Inverter output Used to connect the motor
PD/+1, P/+ External DC reactor terminal Normally connected by the short-circuit bar. Remove the short-circuit bar between +1 and
P/+2 when a DC reactor is connected.
P/+, N/- Regenerative braking unit connection
terminal Connect optional regenerative braking units (If a braking torque is required)
Grounding For grounding (grounding should conform to the local grounding code.)
Inverter
R (L1)
S (L2)
T/N (L3)
PCS
P24
U/T1
V/T2
W/T3
Motor
Note:
To connect the DC reactor,
remove the short-circuit bar.
For Source logic
5
4
4.7 kΩ
3
2
1
L
PD/+1
DC reactor
P/+
N/-
11
24 V DC
CM2
10 kΩ
250 Ω
10 V DC
L
OI
O
H
AM
Frequency
meter
Frequency
setting unit
1 to 2 kΩ
4 to 20 mA DC
Power supply input
Relay output
Common
AL1
AL2
AL0
RY
3-phase 200 V AC
1-phase 200 V AC
3-phase 400 V AC

JX 7
Control Circuit
Side by side mounting
Type No. Signal name Function Signal level
Digital
input
signals
PCS Input power supply
External power supply terminal for input signal (input)
...At sink logic
Internal power supply output terminal for input signal (output)
...At source logic
24 VDC ±10%
P24 Internal 24 VDC 24 VDC internal power supply 24 VDC ±10% 30 mA
1Multi-function Input selection 1 Factory setting: Forward/ Stop
2Multi-function Input selection 2 Factory setting: Reverse/ Stop
3Multi-function Input selection 3 Factory setting: Fault reset
4Multi-function Input selection 4 Factory setting: Emergency stop fault
5Multi-function Input selection 5 Factory setting: Multi-step speed reference 1
LMulti-function Input selection common -- --
Analog input
signal
HFrequency reference power supply 10 VDC 10 mA max
OVoltage frequency reference signal 0 to 10 VDC (10 KΩ)
OI Current frequency reference signal 4 to 20 mA (250 Ω)
LFrequency reference common --
Digital output
signals
AL2 NC output Factory default relay settings
Under normal operation: AL2-AL0 Closed
Under abnormal operation or power shutdown: AL1-AL0 Open
250 VAC 2.5 A
30 VDC 3 A
AL1 NO output 250 VAC 1 A
30 VDC 1 A
AL0 Relay Output common
11 Multi-function output terminal Factory setting: Frequency arrival signal at a constant speed 27 VDC
50 mA max
CM2 Output signal common --
Monitor
Signal
AM Analog frequency monitor/Analog output
current monitor Factory setting: Analog frequency monitor 0 to 10 VDC 1 mA

8Frequency inverters
Input AC Reactor
DC Reactor
Output AC Reactor
3 phase 200 V class 400 V class
Max. applicable
motor output kW Reference Current value A
Inductance
mH
Max. applicable
motor output kW Reference Current value A
Inductance
mH
0.1 to 1.5 AX-RAI02800080-DE 8.0 2.8 0.4 to 1.5 AX-RAI07700042-DE 4.2 7.7
2.2 to 3.7 AX-RAI00880175-DE 17.5 0.88 2.2 to 4.0 AX-RAI03500090-DE 9.0 3.5
5.5 to 7.5 AX-RAI00350335-DE 33.5 0.35 5.5 to 7.5 AX-RAI01300170-DE 17.0 1.3
200 V class 400 V class
Max. applicable
motor output kW Reference Current value A
Inductance
mH
Max. applicable
motor output kW Reference Current value A
Inductance
mH
0.2 AX-RC21400016-DE 1.6 21.4 -
0.4 AX-RC10700032-DE 3.2 10.7 0.4 AX-RC43000020-DE 2.0 43.0
0.7 AX-RC06750061-DE 6.1 6.75 0.7 AX-RC27000030-DE 3.0 27.0
1.5 AX-RC03510093-DE 9.3 3.51 1.5 AX-RC14000047-DE 4.7 14.0
2.2 AX-RC02510138-DE 13.8 2.51 2.2 AX-RC10100069-DE 6.9 10.1
3.7 AX-RC01600223-DE 22.3 1.60 4.0 AX-RC06400116-DE 11.6 6.40
5.5 AX-RC01110309-DE 30.9 1.11 5.5 AX-RC04410167-DE 16.7 4.41
7.5 AX-RC00840437-DE 43.7 0.84 7.5 AX-RC03350219-DE 21.9 3.35
200 V class 400 V class
Max. applicable
motor output kW Reference Current value A
Inductance
mH
Max. applicable
motor output kW Reference Current value A
Inductance
mH
0.1 to 0.4 AX-RAO11500026-DE 2.6 11.50 0.4 to 1.5 AX-RAO16300038-DE 3.8 16.30
0.75 AX-RAO07600042-DE 4.2 7.60 2.2 AX-RAO11800053-DE 5.3 11.80
1.5 AX-RAO04100075-DE 7.5 4.10 4.0 AX-RAO07300080-DE 8.0 7.30
2.2 AX-RAO03000105-DE 10.5 3.00 5.5 AX-RAO04600110-DE 11.0 4.60
3.7 AX-RAO01830160-DE 16.0 1.83 7.5 AX-RAO03600160-DE 16.0 3.60
5.5 AX-RAO01150220-DE 22.0 1.15
7.5 AX-RAO00950320-DE 32.0 0.95
MCCB
Power supply
AC reactor JX
R/L1U
V
W
X
Y
Z
S/L2
T/L3
Power
supply
JX
DC reactor
R/L1
+1 P/+2
MCCB
S/L2
T/L3

JX 9
JX
Ordering information
Specifications Model
Voltage class Max. applicable motor output kW Rated output current (A) Standard
Single-phase 200 V
0.2 1.4 JX-AB002-EF
0.4 2.6 JX-AB004-EF
0.75 4 JX-AB007-EF
1.5 7.1 JX-AB015-EF
2.2 10 JX-AB022-EF
Three-phase 200 V
0.2 1.4 JX-A2002-E
0.4 2.6 JX-A2004-E
0.75 4 JX-A2007-E
1.5 7.1 JX-A2015-E
2.2 10 JX-A2022-E
3.7 15.9 JX-A2037-E
5.5 24 JX-A2055-E
7.5 32 JX-A2075-E
Three-phase
400 V
0.4 1.5 JX-A4004-EF
0.75 2.5 JX-A4007-EF
1.5 3.8 JX-A4015-EF
2.2 5.5 JX-A4022-EF
4.0 8.6 JX-A4040-EF
5.5 13 JXA4055-EF
7.5 16 JXA4075-EF
Choke
A
BB
LCD 2 lines
Remote Operator
Remote Operator
Extansion Cable
A
A
CC C C
A
Output reactor
BD
A
USB Cable CX-Drive
CX-One
MCCB
JX
Filter
AC Reactor
Motor
Ground
Power
Supply
DC Reactor
* Only needed for 3phase 200V or to comply C1 on 3phase 400V models
*

10 Frequency inverters
A Line filters
AInput AC Reactors
ADC Reactors
AChokes
AOutput AC Reactors
BAccessories
DComputer software
Inverter Line filter Rasmi
Voltage Model JX-@Reference Rated current (A) Weight (kg)
1-Phase 200 VAC
AB002 / AB004 AX-FIJ1006-RE 6 0.5
AB007 AX-FIJ1010-RE 10 0.6
AB015 / AB022 AX-FIJ1026-RE 26 0.8
3-Phase 200 VAC
A2002 / A2004 / A2007 AX-FIJ2006-RE 6 1.0
A2015 / A2022 / A2037 AX-FIJ2020-RE 20 1.3
A2055 / A2075 AX-FIJ2040-RE 40 2.3
3-Phase 400 VAC
A4004 / A4007 /A4015 AX-FIJ3005-RE 5 0.9
A4022 /A4040 AX-FIJ3011-RE 11 1.1
A4055 / A4075 AX-FIJ3020-RE 20 1.7
Inverter AC Reactor
Voltage Model JX-@Reference
3-Phase 200 VAC
A2002 / A2004 / A2007 AX-RAI02800080-DE
A2015 / A2022 / A2037 AX-RAI00880175-DE
A2055 / A2075 AX-RAI00350335-DE
1-Phase 200 VAC
AB002 / AB004
Under developmentAB007
AB015 / AB022
3-Phase 400 VAC
A4004 / A4007 / A4015 AX-RAI07700042-DE
A4022 / A4040 AX-RAI03500090-DE
A4055 / A4075 AX-RAI01300170-DE
200V single phase 200V 3-phase 400V 3-phase
Inverter DC Reactor Inverter DC Reactor Inverter DC Reactor
JX-AB002 AX-RC10700032-DE JX-A2002 AX-RC21400016-DE -
JX-AB004 AX-RC06750061-DE JX-A2004 AX-RC10700032-DE JX-A4004 AX-RC43000020-DE
JX-AB007 AX-RC03510093-DE JX-A2007 AX-RC06750061-DE JX-A4007 AX-RC27000030-DE
JX-AB015 AX-RC02510138-DE JX-A2015 AX-RC03510093-DE JX-A4015 AX-RC14000047-DE
JX-AB022 AX-RC01600223-DE JX-A2022 AX-RC02510138-DE JX-A4022 AX-RC10100069-DE
-
JX-A2037 AX-RC01600223-DE JX-A4040 AX-RC06400116-DE
JX-A2055 AX-RC01110309-DE JX-A4055 AX-RC04410167-DE
JX-A2075 AX-RC00840437-DE JX-A4075 AX-RC03350219-DE
Model Diameter Description
AX-FER2102-RE 21 For 2.2 KW motors or below
AX-FER2515-RE 25 For 7.5 KW motors or below
Inverter AC Reactor
Voltage Model JX-@Reference
200 VAC
A2001 / A2002 / A2004
AB001 / AB002 / AB004 AX-RAO11500026-DE
A2007/AB007 AX-RAO07600042-DE
A2015 / AB015 AX-RAO04100075-DE
A2022 / AB022 AX-RAO03000105-DE
A2037 AX-RAO01830160-DE
A2055 AX-RAO01150220-DE
A2075 AX-RAO00950320-DE
400 VAC
A4004 / A4007 / A4015 AX-RAO16300038-DE
A4022 AX-RAO11800053-DE
A4040 AX-RAO07300080-DE
A4055 AX-RAO04600110-DE
A4075 AX-RAO03600160-DE
Types Model Description Functions
Digital
operator
3G3AX-OP05 LCD remote
operator
2 Line LCD remote opera-
tor with copy function,
cable length max. 3m.
3G3AX-CAJOP300-EE Remote operator
cable
3 meters cable for con-
necting remote operator
Accessories
3G3AX-PCACN2 USB converter /
USB cable
RJ45 to USB connection
cable
3G3AX-CTB020-EE RJ45 T-Branch
cable
T cable for RS-422
connection
Types Model Description Installation
Software
CX-drive Computer
software
Configuration and monitor-
ing software tool
CX-One Computer
software
Configuration and monitor-
ing software tool
Types Model Description Functions

JX 11
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. I110E-EN-01B