Omron F3SG-R Series Operating and maintenance instructions

Safety Light Curtain
F3SG-□RE Series
© OMRON Corporation 2015-2016 All Rights Reserved.
Original instructions 8900153-0B
Quick Installation Manual
http://www.ia.omron.com/f3sg-r
Document Title Cat. No.
Safty Light Curtain F3SG-R Series User's Manual Z352-E1

1F3SG-RE
Quick Installation Manual
Introduction
Thank you for purchasing the F3SG-RE Series Safety Light Curtain (hereinafter referred to as the "F3SG-
RE"). This document contains simple instructions to install the F3SG-RE.
Please download the F3SG-RE User's Manual for full contents of the instructions from our website at:
http://www.ia.omron.com/f3sg-r
Table of Contents
1. What is Included ................................................................................................................................1
2. System Components .........................................................................................................................2
3. F3SG-RE Setup Procedure Example ................................................................................................2
4.Wiring Examples ................................................................................................................................3
4-1. Long Mode ................................................................................................................................3
4-2. Short Mode................................................................................................................................3
5. Mounting and Beam Alignment .........................................................................................................4
5-1. Mounting with Standard Fixed Brackets (F39-LGF)..................................................................4
5-2. Mounting with Standard Adjustable Brackets (F39-LGA)..........................................................6
6. Operation Check ...............................................................................................................................9
Suitability for Use/Contact Information ..................................................................................................9
1. What is Included
For ratings/specifications, input/output circuit, LED indicator status and troubleshooting, refer to Safety Light Curtain F3SG-R
Series User's Manual.
Product Quantity
F3SG-RE main unit
Emitter x 1, Receiver x 1
Standard Fixed Bracket
The number of brackets included depends on protective height of the F3SG-RE.
Less than 1,280 mm: 2 sets
1,280 mm or longer and up to 2,270 mm: 3 sets
2,350 mm or longer and up to 2,510 mm: 4 sets
Troubleshooting Guide Sticker 1
Safety Precautions 4
Quick Installation Manual 1

2
F3SG-RE
Quick Installation Manual
2. System Components
3. F3SG-RE Setup Procedure Example
Indicator
Beam
Emitter
Receiver
Power Cable
(Black)
Power Cable
(Gray)
Extension cable
Beam center-line mark
1. Top-beam-state indicator (Blue)
2. Operating range indicator (Green)
3. Power indicator (Green)
4. Lockout indicator (Red)
9. Internal error indicator (Red)
10. Lockout indicator (Red)
11. Stable-state indicator (Green)
12. ON/OFF indicator (Green/Red)
13. Communication indicator (Green)
14. Bottom-beam-state indicator (Blue)
<Emitter> <Receiver>
Setup
Wiring
Mounting/Beam Alignment
Operation check
Done
. . . . . . page 3
. . . . . . page 4
. . . . . . page 9

3F3SG-RE
Quick Installation Manual
4.Wiring Examples
For input/output circuit and other examples than below, refer to Safety Light Curtain F3SG-R Series User's Manual.
4-1. Long Mode
4-2. Short Mode
IN1 IN2
+24 V
0 V
OSSD1 : Black OSSD2 : White Operating Range Select Input : White 24 VDC : Brown Not used : Black 24 VDC : Brown 0 VDC : Blue
Receiver
Emitter
0 VDC : Blue
DC
Power
Supply
Safety
Controller *1 *2
*1. Refer to F3SG-R Series User's Manual for more information.
*2. The safety controller and the F3SG-RE must share the
power supply or be connected to the common terminal of
the power supply.
+24 V
0 V
OSSD1 : Black OSSD2 : White Operating Range Select Input : White 24 VDC : Brown Not used : Black 24 VDC : Brown 0 VDC : Blue
Receiver
Emitter
0 VDC : Blue
DC
Power
Supply
Safety
Controller *1 *2
IN1 IN2
*1. Refer to F3SG-R Series User's Manual for more information.
*2. The safety controller and the F3SG-RE must share the
power supply or be connected to the common terminal of
the power supply.
Wiring Operation check
Mounting/Beam Alignment

4
F3SG-RE
Quick Installation Manual
5. Mounting and Beam Alignment
5-1. Mounting with Standard Fixed Brackets (F39-LGF)
■Dimensions (Check position)
P
51
24.85
F
D C2 (Protective height for 14 mm)
F
A
150 max
150 max
150 max150 max
25
15
24.85
6.4
9.2
51
66
35
C1 (Protective height for 30 mm)
A
51
2-M5 or M6
2-M5 or M6
35
40
Standard Fixed
Bracket
Standard Fixed
Bracket
(F39-LGF)
(F39-LGF)
50.35
F3SG-RE30 Series
Dimension A C1
Dimension C1 4-digit number of the type name
(Protective height)
Dimension D C1-50
Dimension P 20
Protective height
(C1)
Number of Standard
Fixed Brackets *1 Dimension F
0190 to 1230 2 *2 1000 mm max.
1310 to 2270 3 1000 mm max.
2350 to 2510 4 1000 mm max.
F3SG-RE14 Series
Dimension A C2+30
Dimension C2 4-digit number of the type name
(Protective height)
Dimension D C2-20
Dimension P 10
Protective height
(C2)
Number of Standard
Fixed Brackets *1 Dimension F
0160 to 1200 2 *2 1000 mm max.
1280 to 2080 3 1000 mm max.
[ Unit : mm ]
< Screw: M5 or M6 >
[Backside mounting]
*1. The number of brackets required to mount either one of emitter and receiver.
*2. Mounting an emitter or receiver with one bracket is possible for the models of protective height of 0160 to 0270. In this case, locate
this bracket at half the Dimension A (or at the center of the sensor length).
Refer to Safety Light Curtain F3SG-R Series User's Manual for dimensions of side mounting.
Check
position
Step1
Mount
Step2
Wiring Operation check
Mounting/Beam Alignment

5F3SG-RE
Quick Installation Manual
■Mounting
Note: Although this chapter uses the figures of the F3SG-RA series safety light curtain, the mounting proce-
dure of the F3SG-RE series is the same as the F3SG-RA series.
1. Loosen the screw.
2. Lightely tighten the screw.
3. Adjust the mounting position and secure the bracket.
4. Secure the bracket to the wall.
Screws to mount the brackets to the wall are not included.
hook
Hexagon socket head
cap screw (M3 x 15) Fixed Bracket
<Backside mounting> <Side mounting>
Optical surface
of F3SG-RE
Optical surface
of F3SG-RE
Fixed Bracket
Fixed Bracket
Slide the hook
in the groove
Slide the hook
in the groove
<Backside mounting> <Side mounting>
Adjust the bracket
to mounting position
Tightening torque:
2.0 N•m (recommended)
Adjust the bracket
to mounting position
<Backside mounting> <Side mounting>
Check
position
Step1
Mount
Step2
Wiring Operation check
Mounting/Beam Alignment

6
F3SG-RE
Quick Installation Manual
5-2. Mounting with Standard Adjustable Brackets (F39-LGA)
■Dimensions (Check position)
P
72
24.85
F
D C2 (Protective height for 14 mm)
F
A
150 max
150 max
150 max 150 max
25
15
24.85
9.2
6.4
72
84
35
C1 (Protective height for 30 mm)
A
72
2-M5 or M6
2-M5 or M6
35
48.6
Standard Adjustable
Bracket
Standard Adjustable
Bracket
(F39-LGA)
(F39-LGA)
50.35
F3SG-RE30 Series
Dimension A C1
Dimension C1 4-digit number of the type name
(Protective height)
Dimension D C1-50
Dimension P 20
Protective height
(C1)
Number of Standard
Adjustable Brackets *1 Dimension F
0190 to 1230 2 *2 1000 mm max.
1310 to 2270 3 1000 mm max.
2350 to 2510 4 1000 mm max.
F3SG-RE14 Series
Dimension A C2+30
Dimension C2 4-digit number of the type name
(Protective height)
Dimension D C2-20
Dimension P 10
Protective height
(C2)
Number of Standard
Adjustable Brackets *1 Dimension F
0160 to 1200 2 *2 1000 mm max.
1280 to 2080 3 1000 mm max.
[ Unit : mm ]
< Screw: M5 or M6 >
[Backside mounting]
*1. The number of brackets required to mount either one of emitter and receiver.
*2. Mounting an emitter or receiver with one bracket is possible for the models of protective height of 0160 to 0270. In this case, locate
this bracket at half the Dimension A (or at the center of the sensor length).
Refer to Safety Light Curtain F3SG-R Series User's Manual for dimensions of side mounting.
Check
position
Step1
Mount
Step2
Align
beams
Step3
Wiring Operation check
Mounting/Beam Alignment

7F3SG-RE
Quick Installation Manual
■Mounting and Beam Alignment
Note: Although this chapter uses the figures of the F3SG-RA series safety light curtain, the mounting proce-
dure of the F3SG-RE series is the same as the F3SG-RA series.
1. Loosen the screws and adjust the angle.
2. Lightely tighten the screw.
3. Adjust the mounting position and secure the bracket.
4. Secure the bracket to the wall.
Screws to mount the brackets to the wall are not included.
hexagon socket head
cap screw (M3 x 15)
hook
hexagon socket head
cap screw (M3 x 15)
<Backside mounting> <Side mounting>
Optical surface
of F3SG-RE
Optical surface
of F3SG-RE
Adjusta
Bracket
Adjustable
Bracket
Slide the hook
in the groove
Slide the hook
in the groove
Adjust the bracket
to mounting position
Tightening torque:
2.0 N•m (recommended)
Adjust the bracket
to mounting position
<Backside mounting> <Side mounting>
<Backside mounting> <Side mounting>
Check
position
Step1
Mount
Step2
Align
beams
Step3
Wiring Operation check
Mounting/Beam Alignment

8
F3SG-RE
Quick Installation Manual
5. Perform beam alignment according to the indicators.
Angle adjustment range: ±15°
6. Securely tighten the remaining screws.
<Receiver>
TOP(Blue)
BTM(Blue)
STB(Green)
<Receiver> <Receiver><Emitter>
TOP(Blue)
BTM(Blue)
STB(Green)
<Backside mounting> <Side mounting>
<Enlarged view> Hexagon socket head
cap screw (M3x15)
Tightening torque:
2.0 N•m (recommended)
Check
position
Step1
Mount
Step2
Align
beams
Step3
Wiring Operation check
Mounting/Beam Alignment

9F3SG-RE
Quick Installation Manual
6. Operation Check
After wiring, mounting and beam alignment are done, check the operation of the F3SG-RE. Attach the
included Troubleshooting Guide Sticker nearby, if necessary.
LED INDICATOR MAJOR CAUSE
LOCKOUT
Blinking Once
INTERNAL
ON/OFF
LONG
POWER
LOCKOUT
Blinking Twice
POWER
LOCKOUT STB
Error of internal circuit
Error of OSSD lines
Error of Operating Range Select Input line
Error of emitter
Error due to abnormal power supply or noise
Error due to noise
Error due to vibration or ambient light
ON/OFF, COM, or
INTERNAL
For more information, visit
TROUBLESHOOTING [EN]
http://www.ia.omron.com/f3sg-r
Blinking OFF
8600128-9A(5)
http://www.ia.omron.com/f3sg-r
Refer to Safety Light Curtain F3SG-R Series User's Manual or the web site for troubleshooting.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product,
machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all
cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
Suitability for Use
In the interest of product improvement, specifications are subject to change without notice.
Regional Headquarters
OMRON EUROPE B.V.
(Representative and Importer in EU)
Wegalaan 67-69, NL-2132 JD Hoofddorp
THE NETHERLANDS
Tel: [phone] / FAX: [phone]
OMRON SCIENTIFIC TECHNOLOGIES INC.
6550 Dumbarton Circle
Fremont, CA 94555 U.S.A.
Tel: [phone] / Fax: [phone]
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: [phone] / Fax: [phone]
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: [phone] / Fax: [phone]
OMRON Corporation Industrial Automation Company (Manufacturer)
Contact: www.ia.omron.com
Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 JAPAN




Suitability for Use /Conta ct I nfor mati on
Wiring Operation check
Mounting/Beam Alignment