One Forall URC-6131 User manual

6-DEVICE PVR
Universal Remote Control
User’s Guide
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 1

TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . 9
Programming DVD Player/VCR Combo Control. . . . . . . . 10
Searching For Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Programming Master Power. . . . . . . . . . . . . . . . . . . . . . . . 12
Programming The Power Key For Master Power. . . . . . . . . . . . 12
Operating Master Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Clearing Master Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Using Keymover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Programming Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Restoring Keymoved Keys To Default Settings. . . . . . . . . . . . . 14
Restoring A Single Keymoved Key. . . . . . . . . . . . . . . . . . . . . . 14
Restoring All Keymoved Keys In A Single Mode . . . . . . . . . . . . . 15
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Locking Volume Control To One Mode
(Global Volume Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Unlocking Volume Control For A Single Device
(Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . .16
Unlocking All Volume Control
(Restoring Default Setting ). . . . . . . . . . . . . . . . . . . . . . . . . . 17
Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setup Codes for Audio Receivers . . . . . . . . . . . . . . . . . . . . . . 17
Setup Codes for Cable Boxes (Converters) . . . . . . . . . . . . . . . 18
Setup Codes for CD Players . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setup Codes for DVD Player/VCR Combos. . . . . . . . . . . . . . . . 21
Setup Codes for PVRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setup Codes for PVR/Satellite Receiver Combos. . . . . . . . . . . 22
Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . . . 22
Setup Codes for TVs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setup Codes for TV/DVD Player Combos. . . . . . . . . . . . . . . . . 27
Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 27
Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
About Upgrading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Upgrade Exclusions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 2

INTRODUCTION
TheOneForAll6-DevicePVRUniversalRemote
Control(URC-6131)isdesignedtoremotelyoperate
uptosixhomeentertainmentdevicesandfeatures
intuitiveandeasy-tousebuttonstooperatePVR
(PersonalVideoRecorders)andDVDcomponents.Its
sophisticatedtechnologywillallowyoutoconsolidateall
of youroriginal homeentertainmentremotecontrols
intooneeasy-to-useproduct.Advancedfeaturesinclude:
• IntuitivebuttonstoalloweasyaccesstoyourPVRor
DVR(DigitalVideoRecorder)functionsand menus
• Directcodesetupforeasydeviceprogramming
• StepandSetcodesetupandCodeVerificationforan
alternate waytoprogramdevices
• MasterPower functionformasteron/off controlof
allof your equipmentwith asingle keystroke
• VolumeLocktolockvolumecontrolstoonemodeor
individualmodes
• DeviceKeyRe-Assignmenttoremotelycontrol
asecond(duplicate)device
• Color-codedkeystoquicklylocatepopularfunctions
• Codelibraryforpopularvideoandaudiodevices
TheURC-6131 remotecontrolrequirestwo(2) new
AAalkalinebatteries(notincluded)andsomeeasy
programmingtocontrolyourdevices.Forbestresults,
pleasereadandperformallinstructionslistedhere.
Also,keeptheseinstructionsfor futurereference.
3
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 3

4
FEATURES AND FUNCTIONS
Usetheillustrationbelowtolocatefeaturesonthe
OneForAll6-DevicePVRUniversalRemoteControl
(URC-6131) andthenstudytheKey Charts (onthenext
threepages)tolearnhow theyfunction.
Tofindoutwhattype of devicescanbe controlledby
eachdevicekeyafterprogramming,seetheDevice
Table on page7.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 4

5
Key Charts Whenthe LED (redlight)blinks,the
remotecontrolisworkingand(after
programming)issendingsignals.
Press TV,PVR,DVD,CBL/SAT,AUD,
orVCR oncetoselect adesired
homeentertainmentdevice
tocontrol.AlsoseetheDeviceTable
onpage7.
Press POWER once toturnon oroff
theselecteddevice.For master
powercontrol,seeProgramming
Master Power onpage12.
Press MENU oncetodisplayyour
selecteddevice’smainmenu.For
PVRs,usePVR Menu.
UseINFO todisplaythecurrent
channelandprograminformation.
UseGUIDE todisplayyourselected
device’sprogramguideorsetup
menu.
UseEXIT toexitfrom yourselected
device’sguide ormenu.
Usethecursorkeystomovethe
cursorintheprogramguideand
menuscreens.
UseSELECTto chooseoptionsfrom
yourselecteddevice’smenuorguide.
IntheAUD mode,useSELECT to set
thesurroundsound.Use▲(or▼)
toadjustthevolumehigher(or
lower).Use (or )toadjustthe
balanceleft(orright).
UseVOL+ (orVOL-)toraise(or
lower)thesoundvolume.
UseCH+ (orCH-)toselectthenext
higher(orlower)channel.
Press Mute oncetoturnthesound
off or on.
Use tocommandyourPVRto
instantlyreplaythelast7seconds
of aprogramyouareviewing.
continuedonnextpage...
▲
▲
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 5

6
FEATURES AND FUNCTIONS
Key Charts (continued)
Press Prev. once torecall thelast-
viewedchannelandtopageback
onescreenonthemainmenu.
IntheAUD mode,usePrev. to select
thereceiverband.
Use or toperformtheThumbs
DownorThumbs Upfeatureon
yourTivo/PVRdevice.
Press PVR Menu oncetoturnthe
PVR’smain menuonoroff.
Use tocommandyourPVR to
skiporadvancethrougharecorded
programsceneorcommercial.
Usethetransportkeystocontrol
yourVCR,PVR,DVDplayer,orVOD
(VideoOn Demand)if availableon
yourcableorsatelliteservice.
Press REC twicetorecordaPVRor
VCRprogram.
UseAudio/CC to select analternate
audiochannel(e.g.,Spanish)or
closed captions,if availableonyour
cable/satelliteserviceorDVD.
Press SUBT. once toturnsubtitles
onor off,if available.
UseANGLE/SLEEP to performthe
anglefunctiononyourDVDplayer
ortosetthesleeptimerona
selecteddeviceif equippedwith
thisfeature.
Use forslowmotionplayback
onaVCR,PVR,orDVDplayer
equippedwiththis feature.Press
PLAY tocancelslowmotion.
Usethekeypad(1~9and0) to
directlyselectchannels(e.g.,009
or031).
IntheAUD mode,usethekeypad
(1~9and0)toselectaudiosources
1through10.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 6

7
Press ENTER onceafter entering
thechannelnumbersonsomeTVs.
UseTV/VID toswitchtheTV’sinput
toviewTVorvideoprograms.
UsePIP toswitchthePicture-In-
Picturefeature onoroff (if available
onyourTV).
UseSwap to switch imagesand
soundbetweenthemainand
windowpictures.
UseMove to movethewindow
picturetodifferentpositionsinthe
mainpicture.
UseSET forallprogramming
sequences.
Device Table
NOTE:Pleaserefertothetablebelowwhenperformingthe
instructionsin“ProgrammingDevice Control”onpage9 or
“ProgrammingDVDPlayer/VCRComboControl”onpage10.
Afterprogramming,theOne ForAll 6-DevicePVR
Universal Remote Control will be able to control the
followingtypes of devices:
NOTE:AudioReceiver/DVDPlayerCombos(i.e.,Home
TheaterInA Box)arelistedin“SetupCodesForAudio
Receivers”onpages17and18.
DEVICE KEY CONTROLS THESE TYPES OF DEVICES
Televisions
PVRs(PersonalVideoRecorders)
CableBoxes(Converters),SatelliteReceivers,
orSatellite/PVRCombos
VCRsorTV/VCRCombos
DVDPlayer,DVDPlayer/VCRCombos,or
TV/DVD PlayerCombos
AudioReceiversorCDPlayers
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 7

INSTALLING BATTERIES
1. Ontheremotecontrol’sback,pushthetab
andlift off thebatterycover.
2. Obtaintwo(2)newAAalkalinebatteries.
Matchthe+and–marksonthebatteries
tothe+and–marksinthebatterycase,
theninsertthenewbatteries.
3. Pressthebatterycoverbackintoplace.
Thetabshouldclickwhenthecoveris
locked.
4. Testtheremotecontrolbypressing
anymodekey(e.g.,TV).If thebatteries are
insertedcorrectly,theLED (redlight)will
blinkonce.
NOTE:Whenbatteriesneedreplacement,theremotecontrol
will stopoperating. Removetheoldbatteriesandinsertnew
ones within 10minutestoensure allof yourprogramming
information isrestored.
8
❶
❸
❷
❷
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 8

PROGRAMMING DEVICE CONTROL
TheOneForAll6-DevicePVRUniversalRemoteControl
ispreprogrammedatthefactorytooperateanRCATV,
VCR,andsatellitereceiver,aPhilipsTivoPVR,aToshiba
DVDplayer,andaPioneeraudioreceiver/amplifier.To
controldevicesotherthanthedefaultbrands,perform
thefollowingsteps;otherwiseskipthissection:
NOTE:ForDVDPlayer/VCRCombo control,seethenextpage.
1. Turnonadesireddevice(e.g.,VCRor
DVD player)and,if applicable, insert
media(e.g.,cassetteordisc).
NOTE:Pleasereadsteps2through4 completely
beforeproceeding.Highlight orwritedownthe
codes anddeviceyouwish to programbefore
startingstep 2.
2. Ontheremotecontrol,pressadevicekey
once(i.e.,TV,PVR,DVD,CBL/SAT,AUD,orVCR).
NOTE:To programcontrolof acableboxor
satellitereceiver,press CBL/SATonce.
NOTE:To programcontrolof aCDplayeror
audioreceiver,pressAUD once.
NOTE:To program controlof aTV/VCR Combo,
pressVCR once.Afterprogramming,youwill be
abletocontrolchannelselection,volume,and
VCRfunctions.
NOTE:To program controlof aTV/DVD Player
Combo,pressDVDonce.Afterprogramming,
youwillbeabletocontrolchannelselection,
volume,andDVD functions.
3. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
4. UsetheManufacturer’s Codes(startingon
page17) tolocatethe typeof deviceand
brandnameandthenenterthefirstfour-
digitcodeforyour device.If performed
correctly,theLED willblinktwice.
NOTE:If theLED didnotblinktwice,repeatsteps
2through4andenterthesamecodeagain.
5. Aimtheremotecontrolatthedeviceand
pressPOWER once.Thedeviceshouldturn
off.If itdoesnot,repeatsteps2 through 5,
tryingeachcodeforyourbranduntilyou
findonethatworks.If itstill doesn’t work,
trySearchingForYourCodeonpage11.
NOTE:If thedevicedoes nothavea POWER
key,pressthe (Play)key.
continuedon nextpage...
9
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 9

PROGRAMMING DEVICE CONTROL
(continued)
6. Repeatsteps1through5(ontheprevious
page)foreach deviceyou wantto control.
For future reference,write downeach
workingdevicecodeinthefollowingboxes:
TV Code:
PVR Code:
DVD Code:
CBL/SAT Code:
AUD Code:
VCR Code:
PROGRAMMING DVD PLAYER/VCR
COMBO CONTROL
1. TurnontheDVDPlayer/VCRComboand
insertaDVD.
NOTE:Pleasereadsteps2 through4completely
beforeproceeding.Highlightorwrite downthe
codes anddeviceyouwishtoprogrambefore
startingstep 2.
2. Ontheremotecontrol,pressDVD.Next,
pressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
3. UsetheSetupCodesFor DVDPlayer/VCR
Combos(onpage21)tolocatethebrand
nameandthenenterthefirstfour-digit
codefor yourdevice.If performed
correctly,theLED willblinktwice.
NOTE:If theLED didnotblinktwice,repeatsteps
2through4andenterthesamecodeagain.
4. Aimtheremotecontrolatthedeviceand
pressPOWER once.Itshouldturnoff.If it
doesnot,repeatsteps2through4,trying
eachcodeforyourbranduntilyoufindone
thatworks.If itstill doesnotwork,try
SearchingForYourCodeonthenextpage.
NOTE:If thedevicedoes nothavea POWER
key,pressthe (Play)key.
10
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 10

5. If you’ve locateda setupcodethatworks,
butitalsohasaseparateVCRcode,you’ll
alsoneedtoprogramitintotheremote
control to accessVCR controls as follows:
a. PressVCR once.Thenpressandhold
theSET keyuntiltheLED blinkstwice.
b. EntertheVCRcodeforyourDVD
Player/VCR Combo.If correct,theLED
willblinktwice.
NOTE:IfaseparateVCRsetupcodeisnotlisted,
youcanusetheVCRkeytoprogramaseparate
VCRdeviceoranotherdevice(see“Re-Assigning
DeviceKeys”onpage15)
6. For future reference,write down the
workingDVDPlayer/VCRcombocodein
thebelowboxes:
DVD/VCR Code:
VCR Code:
(if used)
SEARCHING FOR YOUR CODE
If yourdevicedoesnotrespond totheremotecontrol
aftertrying allcodeslistedfor yourbrand,orif your
brandisnotlistedatall,trysearchingforyourcode.
Forexample,tosearchfora codeforyourTV:
1. Ontheremotecontrol,pressTV once.
2. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
3. Enter9- 9-1.TheLED willblinktwice.
4. AimtheremotecontrolatthetheTVand
slowlyalternatebetweenpressingPOWER
andTV.StopwhentheTVturnsoff.
NOTE:Inthesearchmode,theremotecontrol
willsendIRcodesfromitslibrarytotheselected
device,startingwiththemostpopularcodefirst.
5. Tolockinthecode,pressandreleaseSET.
TheLED willblinktwice.
6. Tosearchforthecodesof yourother
devices,repeatsteps1through5,but
substitutetheappropriatedevicekeyfor
thedeviceyouaresearchingfor.
11
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 11

CHECKING THE CODES
If youhavesetuptheremotecontrolusingthe
SearchingForYourCodeprocedure(ontheprevious
page),youmayneedtofindoutwhichfour-digitcode
isoperatingyour equipment.
Forexample,tofindoutwhichcodeisoperatingyourTV:
1. Ontheremotecontrol,pressTV once.
2. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
3. Enter9- 9-0.TheLED willblinktwice.
4. Toviewthecodeforthefirstdigit,press1
once.Wait3seconds,counttheLED
blinks(e.g.,threeblinks=3) andwrite
downthenumberin theleftmostboxin
theTVcodeboxesonpage10
NOTE:If acodedigitis“0”,theLED will not
blink.
5. Repeatstep4threemore timesfor
remainingdigits.Use2forthesecond
digit,3forthethirddigit,and4for the
fourthdigit. Writedownthecodedigitsin
theremainingTVcodeboxesonpage10.
6. Tocheckforcodesof otherdevices,repeat
steps1through5,butsubstitutethe
appropriate devicekeyforeachdeviceyou
arechecking.Writedownthedevice’scode
digitsintheappropriatecodeboxeson
page10.
PROGRAMMING MASTER POWER
Initsdefaultstate,thePOWER keyontheURC-6131
remote control will individually power your home
entertainmentdevicesonoroff.However,youcanalso
programaMaster Power functionontothePOWER key
thatwillsequentially turn onoroff allthedevices with
asinglekeypress.
Programming The Power Key For Master Power
1. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
12
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 12

2. Enter9-9-5.TheLEDwillblinktwice.
ThenpressPOWER once.
3. Forthefirstdeviceyouwantinthepower
onsequence,pressitsdevicekey(e.g.,
CBL/SAT) once.
4. Repeatstep3uptofive moretimestoadd
desireddevicestothepower-onsequence.
5. Tosavethesettingsand exittheprogram,
pressandholdSET untiltheLED blinks
twice,thenreleaseSET.
Operating Master Power
1. Afterprogramming,pointtheremote
controlatthedevicesandpressPOWER
foratleast2secondstosequentiallyturn
onor off yourdevices.
NOTE:WhenPOWER is pressedforlessthan
2seconds,a powercommandwillonlybesent
tothecurrently-selecteddevice.Thisallowsyou
tostillindividuallypowerdevicesonor off.
2. Youwillsee thedevicesturnonoroff
accordingtoyourprogrammedsequence.
NOTE:Thecurrently-selecteddevicewillalways
turnon first,followedby the remaining
programmedsequence.Afterthemasterpower
sequencehasbeencompleted,theremotecontrol
willbesettocontrolthefirstpowered-ondevice.
NOTE:If oneor more devicesdoes not havea
POWERkey,thepoweroff/onsequencemaybe
slightlydelayedwhentheremotecontrolsignals
thedevice(s).Thisactionisnormal.
Clearing Master Power
1. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
2. Enter9-9-5.TheLEDwillblinktwice.
ThenpressPOWER once.
3. PressandholdSET untiltheLED blinks
twice,thenreleaseSET.MasterPoweris
nowcleared.
13
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 13

USING KEYMOVER
TheOneForAll6-DevicePVRUniversalRemote
Control includes a Keymover feature that allows you to
map(orcopy)keys from onemode(i.e.,sourcemode)
toanothermode(i.e.,destinationmode).
NOTE:Thefollowingkeyscannotbeusedasa sourceor
destination:TV,PVR,DVD,CBL/SAT,AUD,VCR,andSET.
Programming Keymover
Forexample,if yourVCRdoesnothavevolumecontrol,
youcanmapthosekeys(i.e.,VOL+,VOL-,andMute)
fromtheTVmodetotheVCRmodeasfollows:
1. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
2. Enter9-9-4.TheLED willblinktwice.
3. Forthesourcemode,pressTV once.
4. Forthesourcekey,pressVOL+ once.
5. Forthedestinationmode,pressVCR once.
6. Forthedestinationkey,pressVOL+ once.
7. TheLED willblinktwiceindicatingthe
keymoved sequence is correct.
8. Repeatsteps1 through7twicemoreto
mapremainingvolumecontrolkeys,
substituting VOL- andMute assourceand
destinationkeysin steps4and6.
Uponcompletionof theaboveprocedure,youcan now
useyourOneForAll6-DevicePVRUniversalRemote
ControltocontroltheTV’svolumeandmuteinthe
VCRmode,aswellasin theTVmode.
Restoring Keymoved Keys to Default Settings
Restoring A Single Keymoved Key
1. Pressadevicekeythathasakeymovedkey.
2. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
3. Enter9-9-4.TheLED willblinktwice.
4. Pressthedestinationkeytwice(wherethe
keymovedkey isstored).TheLED will
blinktwice.
14
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 14

Restoring All Keymoved Keys In A Single Mode
1. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
2. Enter9-9-4.TheLED willblinktwice.
3. Pressthedestinationmodetwice(where
keymovedkeysarestored).TheLED will
blinktwice.
RE-ASSIGNING DEVICE KEYS
TheOneForAll6-DevicePVRUniversalRemoteControl
canbesettocontrolasecondTV,PVR,VCR,DVDplayer,
orotherdevice.Forexample,tocontrolaTV,acablebox,
andtwoVCRs,youwillneedtore-assigntheunused
DVDkeytooperatethesecondVCRasfollows:
1. Ontheremotecontrol,pressandholdSET
untiltheLED (redlight)blinkstwice,then
releaseSET.
2. Enter9- 9-2.TheLED willblinktwice.
3. PressVCR once,then pressDVD once.The
LED willblinktwice.
4. TheDVD keyisnowreadytobe
programmedforyoursecondVCR.See
ProgrammingDeviceControlon page 9.
Tore-assignotherdevicekeystotheDVD key,repeat
steps1through4withasequencefromthebelowchart:
NOTE:Only one device can beassignedto an unused device
key atatime.
To Re-Assign Device Perform Sequence
DVD as2ndTV key: SET -9-9-2- TV -DVD
DVD as2ndCBL/SAT key: SET -9-9- 2-CBL/SAT -DVD
DVD as2ndPVR key: SET -9-9-2-PVR -DVD
DVD as2ndAUD key: SET -9-9-2-AUD -DVD
Youcanalsore-assignanotherunuseddevicekeyby
substitutingitforthe DVD keyaboveandperformingthe
sequence.Forexample,tore-assignanunusedAUD key
asasecondVCR key,perform SET -9-9-2-VCR -AUD.
Whenare-assignmentisdone,theLED willblinktwice
toconfirmyourchoice.Atthattime,youwillneedto
programtheremotecontrolforthenewdevice(see
ProgrammingDeviceControlonpage9).
15
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 15

CHANGING VOLUME LOCK
TheOneForAll6-DevicePVRUniversalRemote
Controlissetatthefactoryforindependentvolume
control of each selected device.
However,youmaychangetheVolumeLocksettingto
GlobalVolumeLock so that adevice’svolumewill be
lockedtoonemode(e.g.,tocontrolTVvolumeinall
othermodes).Afterthat,if desired,youcanperform
IndividualVolume Unlock onaselecteddevicetosetits
volume control for independent operation.
Locking Volume Control To One Mode
(Global Volume Lock)
1. PressandholdSET untiltheLED (redlight)
blinkstwice,thenreleaseSET.
2. Enter9-9-3andthenpressany
modekeyonce(e.g.,TV).TheLEDwill
blinktwice.
3. Now,whenyoupressVOL+,VOL-,orMute,
thevolumeof theselecteddevice(e.g.,TV)
will be controlled regardless of the mode
you have selected.
Unlocking Volume Control For A Single Device
(Individual Volume Unlock)
1. AfterperformingGlobalVolumeLock(see
above),pressadesiredmodekeywhere
youwantvolume to beunlocked(e.g.,
AUD) and controlled within its own mode.
2. PressandandholdSETuntiltheLED (red
light)blinkstwice,thenreleaseSET.
3. Enter9-9-3andthenpressVOL- once.
TheLED willblinkfourtimes.
4. If desired,repeatsteps1 through 3
(of thissection)foreachdevicethatyou
want volumetobeunlocked.
5. Now,afteryouselectadevicethathas
volumeunlocked (e.g.,AUD),pressing
VOL+,VOL-,orMute,will control the
device’svolumeonlyin itsownmode.
16
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 16

Unlocking All Volume Control (Restoring
Default Setting)
NOTE:Performingthese instructions will restoreindependent
volume control forallprogrammeddevices (e.g.,TVvolume
controlinTVmode,VCRvolumeinVCRmode,etc.).
1. Ontheremotecontrol,pressandholdSET
untiltheLED(redlight)blinkstwice,then
releaseSET.
2. Enter9-9-3andthenpressVOL+ once.
TheLED willblinkfourtimes.
3. Volume willagainbeindependently
controlledaccordingtoitsdefaultstates
forallprogrammeddevices.
MANUFACTURER’S CODES
Setup Codes For Audio Receivers
ADC 0531
Aiwa 1089,1405,0121,0158,0189,1388
Alco 1390
Anam 1609
ApexDigital 1257
Audiotronic 1189
Audiovox 1390
Bose 1229
Capetronic 0531
Carver 1089,1189,0189
Denon 1104,1360
Harman/Kardon 0110,0189
JBL 0110,1306
JVC 0074
KLH 1390
Kenwood 1313,1027,1570,1569,0027
Koss 1366
Linn 0189
MCS 0039
Magnavox 1089,1189,0189,0531
Marantz 1089,1189,0039,0189
Musicmagic 1089
Onkyo 0135,0842,1298 continuedon nextpage...
17
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 17

MANUFACTURER’S CODES
Setup Codes For Audio Receivers (continued)
Optimus 1023,0531,0670
Panasonic 1518,0039,0309
Philips 1089,1189,1269,0189
Pioneer 1023,0014,0150,0531,0630,1384
PolkAudio 0189
Proscan 1254
Quasar 0039
RCA 1023,1254,0531,1390,1609
Samsung 1295
Sansui 1089,0189
Sherwood 1653
Sony 1058,1258,1158,0158,1558,1658,1758
Soundesign 0670
Stereophonics 1023
Sunfire 1313
Technics 1308,1309,1518,0039,0309
Thorens 1189
Venturer 1390
Victor 0074
Wards 0014,0158,0189
Yamaha 0176,1176
Setup Codes For Cable Boxes (Converters)
ABC 0003,0008,0014,0017
Americast 0899
Bell&Howell 0014
BellSouth 0899
Director 0476
GeneralInstrument 0476,0003,0276,0810
GoldStar 0144
Hamlin 0009,0273
Jerrold 0476,0003,0276,0014,0810
Memorex 0000
Motorola 0476,0276,0810
Pace 0237
Panasonic 0000,0107
Paragon 0000
Philips 0305,0317
Pioneer 0877,0144,0533,1877
Pulsar 0000
Quasar 0000
Regal 0273,0279
Runco 0000
Samsung 0144
18
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 18

ScientificAtlanta 0877,0008,0017,0477,1877
Sony 1006
Starcom 0003
Supercable 0276
Torx 0003
Toshiba 0000
Zenith 0000,0525,0899
Setup Codes For CD Players
Aiwa 0157
Burmester 0420
CaliforniaAudioLabs 0029,0303
Carver 0157,0179,0437
Classic 1297
DKK 0000
DMXElectronics 0157
Denon 0873,0003
Fisher 0174,0179
GPX 1296
Garrard 0393,0420
Genexxa 0032
Harman/Kardon 0157,0173
Hitachi 0032
JVC 0072,1294
Kenwood 0681,0826,0626,0028,0037,0190
Koss 1317
Krell 0157
Linn 0157
MCS 0029
MTC 0420
Magnavox 0157
Marantz 0626,0029,0157,0180
Miro 0000
Mission 0157
NSM 0157
Nikko 0174
Onkyo 0868,0101
Optimus 1063,0000,0032,0037,0145,0179,0420,0437
Panasonic 0029,0303
Parasound 0420
Philips 0626,0157
Pioneer 1063,1062,0032
PolkAudio 0157
Proton 0157
QED 0157
Quasar 0029 continuedonnextpage...
19
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 19

MANUFACTURER’S CODES
Setup Codes For CD Players (continued)
RCA 1062,0032,0053,0179
Realistic 0179,0180,0420
Rotel 0157,0420
SAE 0157
Sansui 0157
Sanyo 0179
Sharp 0861,0037,0180
Sherwood 1067,0180
SonicFrontiers 0157
Sony 0490,0000,0100,0185
Soundesign 0145
TDK 1208
Tascam 0420
Teac 0174,0180,0393,0420
Technics 0029,0303
Victor 0072
Wards 0157,0053
Yamaha 0888,0036,0187,1292
Yorx 0461
Setup Codes For DVD Players
Aiwa 0641
ApexDigital 0672,0717,0755,0794,0796,0797,0830,1100
Audiologic 0736
B&K 0655,0662
BlueParade 0571
Broksonic 0695
DVD2000 0521
Daewoo 0784
Denon 0490,0634
Emerson 0591
Enterprise 0591
Fisher 0670
GE 0522,0717,0815
GPX 0699,0769
GoVideo 0715,0783
Gradiente 0651
Greenhill 0717
Harman/Kardon 0582,0702
Hitachi 0573,0664
Hiteker 0672
JBL 0702
JVC 0558,0623,0867
KLH 0717
20
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 20