Onespace 50-2401ES User manual

MODEL # 50-2401ES
SUPPLIER CODE: PMEX
2 Drawer Cabinet, Espresso
ASSEMBLY INSTRUCTIONS
For fastest service onclaims, requests for replacement parts, or
questions, please visit our website at
www.comfortproducts.net/support
e-mail: [e-mail]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
1 OF 12
OneSpace is a Trademark of Comfort Products, Inc.
™

HARDWARE KIT
STOCK # 51-2401HA
PART DESCRIPTION QTY.
STOCK NO. PART DESCRIPTION QTY. STOCK NO.
2 OF 12
REPLACEMENT PARTS
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED .
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE
UNIT IS FINISHED WITH A LAMINATE PAPER FOIL.
A
B
C
D
E
F
H
Desktop 51-2401ESC
51-2401ESA
Left side
panel 1
Right side
panel 51-2401ESB 1
Bottom leg
51-2401ESD
1
1
SM drawer
front
51-2401ESE 4
Bottom
panel
SM left side
panel
51-2401ESF
51-2401ESH
1
1
ISM right side
panel 51-2401ESI 1
JSM back side
panel 51-2401ESJ 1
KLG left side
panel 51-2401ESK 1
LLG right side
panel 51-2401ESL 1
MLG back
panel 51-2401ESM 1
GLG drawer
front 51-2401ESG 1
N
Back
panel 51-2401ESN 1
ZDrawer bottom
panel 51-2401ESZ 2
- THE FOLLOWING TOOLS ARE NOT INCLUDED
*Please look for part number on the side of the part. It either is stamped or has a labeled sticker.
PART DESCRIPTION QTY.
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
BOLT
SHORT
16
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE
PART WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.

Fix sixteen wooden dowels (1) to panels (A), (B), (H), (I), (K) & (L) using a rubber mallet.
STEP 1
STEP 2

5 OF 12
Step 3:
Screw two drawer slides (3-CL) on to the left side panel (A) using four euro screws (4).
Then Screw two drawer slides (3-CR) on to the right side panel (B) using four euroscrews (4).
(Make sure all rollers are towards the bottom of panels A and B.)
4
33
X 8pcs
Part # 4 4
Part # 3-CL (DRAWER SLIDE - CL) X 2pcs Part # 3-CR (DRAWER SLIDE - CR) X 2pcs
Bottom

6 OF 12
Step 5:
X 8pcs
Attach four bottom legs (E) to bottom panel (D) using eight CSK screws (6)
in predrilled holes.
6
Part # 6
Step 4:
Screw bottom panel (D) to left side panel (A) & right side panel (B)
with four Unitar screw (5) using predrilled
holes. (Make sure the unshed side of panel D is faceing back).
X 4
Part # 5
5
E
Back

7 OF 12
Step 7: Attach the back panel (N) to the cabinet by aligning back panel with edges of the top and
sides of cabinet. Then use twenty-two Nail pins (8) and a rubber hammer to x the back
panel (N) to the cabinet. (DO NOT Hammer too hard, tight nails will cause drawers to be hard to
open).
X 22pcs
Part # 8
8
Step 6:
Attach desktop to cabinet by aligning the Minix bolts (2) into predrilled holes.
Then press four Cams (7) to the bottom of the holes and making sure the arrow on top of each Cam (7)
is pointing up. Turn the Cam clockwise to lock the cam into the Minix bolt (2).
X 4pcs
Part # 7
7
13
2
Caution:
Do not over tighten
cams.

8 OF 12
Step 9: Slide drawer bottom panels (Z) into both big and small drawers using the grooves
of the side drawer panels. (Be sure nished side of bottom panels facing up or inside drawer).
Small drawer assembly :
Attach SM back panel (J) to SM side drawer panels (H and I) by aligning grooves with the SM
drawer back. Then x with four CSK screws (6).
Large drawer assembly :
Attach LG back panel (M) to LG side drawer panels (L and K) by aligning grooves with the LG
drawer back. Then x with four CSK screws (6).
X 8pcs
Part # 6
6
Step 8: Small drawer assembly :
Attach two SM side drawer panels (H and I) to SM drawer front (F) aligning Minix bolts,
then press Cams (7) to the bottom of the holes and making sure the arrow on top of each
Cam (7) is pointing towards the Minix bolt. Turn the Cam clockwise to lock the cam into the
Minix bolt (2).
Large drawer assembly :
Next attach two LG side drawer panels (K and l) to LG drawer front (G) aligning Minix bolts,
then press Cams (7) to the bottom of the holes and making sure the arrow on top of each
Cam (7) is pointing towards the Minix bolt. Turn the Cam clockwise to lock the cam into the
Minix bolt (2).
X 4pcs
Part # 7
13
7
7
13

9 OF 12
Step 10: Attach Aluminum handle and two handle screws (9) to each drawer.
X 4pcs
Part # 9
X 2pcs
Part # 9
9
9

10 OF 12
Step 11:
X 8pcs
Attach two drawer slides (10-DR and 10-DL) to the bottom of each drawer using eight
short screws (11)
Part # 11
11
10
10
1. 2.
THIRD
LAST HOLE
THIRD
HOLE
Part # 10-DR (DRAWER SLIDE - DR) X 2pcs Part # 10-DL (DRAWER SLIDE - DL) X 2pcs
11

• DO NOT stand on the desk. Do not use the desk as a stepladder.
•
• Every 6 months, check all bolts and screws to ensure they are tight.
• This products is California 93120 Compliant for Formaldehyde.
12 OF 12
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR W ARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products' authorized dealers
as shown by
the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort
Products' option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and does not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product modi cation, intentional damage, re, misuse, negligence, or exposure
to the elements;
labor or assembly cost. This warranty does not cover the cost of transportation or labor . In no event shall Comfort
Products be liable in either tort or contract for any loss
or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty
is NOT applicable to end user customers who use Comfort Products for rental purposes. This warranty applies only to end-
user customers in the United States.
All warranties are limited to the original purchaser for normal use. The weight capacity is de ned as 100
Comfort Products, Inc.
P.O. Box 999
Memphis, TN 38101
www.comfortproducts.net
[e-mail]
pound s for the table and 20 pounds for the shelves. For claims or questions concerning this warranty, please visit:
www.comfortproducts.net or e-mail us at: [email protected]
MODEL: # 50-2401ES