Onespace STANTON 50-1001WO User manual

7
STANTON COMPUTER DESK, WHITE OAK
ASSEMBLY INSTRUCTIONS
MODEL 50-1001WO
SUPPLIER CODE: HMOF
For fastest service on claims, requests for replacement parts,
www.comfortproducts.net/support
e-mail: [e-mail]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
or questions, please visit our website at:

2 of 6
CONTENTS
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
PART DESCRIPTION STOCK# QTY.
1Desktop 51-1001DTWO 1
2Keyboard Tray 51-1001 KTWO 1
3 Back Board 51-1001BBWO 1
4 Bottom Shelf 51-1001BSWO 1
5Left Stand 51-1001LSW 1
6Right Stand 51-1001RSW 1
7 Extenders 51-1001EXW 4
PARTS
PART DESCRIPTION QT Y.
AM5 X 60MM 4
B M6 X 90MM 4
CM4 X 12MM 4
D Hex Wrench 1
E M5 X 55MM 4
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART
WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED .
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOL BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- THE FOLLOWING TOOL IS NOT INCLUDED.
Extra Hardware Pack 1
51-1001M6W
51-1001M8W
2
2
Front Leg Cap
Back Leg Cap
8
9
HARDWARE
STOCK # 51-1001WOHA

5
A
6
3
A
7
B
7
B
7
B
7
B
1
3 of 6
ASSEMBLY INSTRUCTION
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
STEP 2
Position the four extenders (7) as shown in the diagram.
Attach the desktop (1) using four screws (B) as shown.
STEP 1
Attach back board (3) to right stand (6) and left stand (5)
using four (A) screws as shown.
CAUTION: DO NOT overtighten screws
A x 4
B x 4
7 x 4
8
8
9
9
Next attach two back leg caps (9) to the back of stands (5)
and (6). Also attach two front leg caps (8) to the front of
stands (5) and (6).
9 x 2 8 x 2

C
C
2
E
4
E
EE
4 of 6
ASSEMBLY INSTRUCTION
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
STEP 3
Attach bottom shelf (4) using four screws (E) as shown.
STEP 4
Attach keyboard tray (2) using four screws (C) as shown.
NOTE: You will need a phillips head screwdriver.
E x 4
C x 4

5 of 6
STEP 5
Make sure all screws are securely fastened.
CAUTION: DO
NOT overtighten screws. Check screws every 6 months to
ensure they are still tight.
ASSEMBLY INSTRUCTION
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED

Comfort Products, Inc.
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
email: [email protected]
www.comfortproducts.net
• DO NOT stand on the desk. Do not use the desk as a stepladder.
•
• Every 6 months, check all bolts and screws to ensure they are tight.
• This products is California 93120 Compliant for Formaldehyde.
6 of 6
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR W ARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products' authorized dealers
as shown by
the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort
Products' option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product modi cation, intentional damage, re, misuse, negligence, or exposure
to the elements;
labor or assembly cost. This warranty does not cover the cost of transportation or labor . In no event shall Comfort
Products be liable in either tort or contract for any loss
or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty
is NOT applicable to end user customers who use Comfort Products for rental purposes. This warranty applies only to end-
user customers in the United States.
All warranties are limited to the original purchaser for normal use. The weight capacity is de ned as 100
pounds (unless otherwise
speci ed). For claims or questions concerning this warranty, please visit www. comfortproducts.net /support. e-
mail :
[e-mail]
MODE L : # 50-1001 WO