Onespace 50-2401ES User manual

MODEL # 50-2401ES
SUPPLIER CODE: PMEX
ASSEMBLY INSTRUCTIONS
OneSpace is a Trademark of Comfort Products, Inc.
™
2 Drawer Cabinet
For fastest service on claims, requests for replacement parts, or
questions, please visit our website at
www.comfortproducts.net/support
e-mail: [email protected]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE

2 OF 12
A
B
C
D
E
E
E
E
Y
F
H
I
J
Z
ZG
K
L
M
Cabinet top maximum
weight capacity
=40lbs
Drawer maximum
weight capacity
=20lbs

3 OF 12
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART
WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
PART DESCRIPTION QTY
STOCK NO
1
51-2401ESA
Side Panel Left
A
PART DESCRIPTION QTY
STOCK NO
HARDWARE KIT
STOCK # 51-2401HA
PART DESCRIPTION QTY
16
Wood Dowel (D6 x 30mm)
1
8
Euro Screw (M6 x 9mm)
2
2
3
4
5
6
2
Unitar Screw (M6.3 x 40mm)
8
Drawer Slide
(350mm) (L)
Drawer Slide
(350mm) (R)
Drawer Slide
(350mm) (DL)
4
1
51-2401ESB
Side Panel Right
B
1
51-2401ESC
Cabinet top
C
1
51-2401ESD
Bottom Panel
D
4
51-2401ESE
Bottom Leg
E
1
51-2401ESF
Small Drawer Front
F
1
51-2401ESG
Large Drawer
Front
G
1
51-2401ESH
Small Drawer
Side Left
H
1
51-2401ESI
Small Drawer
Side Right
I
1
51-2401ESJ
Small Drawer Back
J
1
51-2401ESK
Large Drawer
Side Left
K
1
51-2401ESL
Large Drawer
Side Right
L
1
51-2401ESM
Large Drawer
Back
M
1
51-2401ESN
Back Panel
N
2
51-2401ESZ
Drawer Bottom
Z
7CSK Screw (M4 x 30mm) 8
CSK Screw (M3.5 x 15mm) 8
8
8
CSK Screw (M4.7 x 38mm) 8
9
Cam (12 x 15)
10
Nail Pin 22
Metal Rod
(M5 x 355mm) 2
11
Aluminium Handle (7050) 2
12
Handle Screw (M4 x 20mm) 4
13
2
2
14
Drawer Slide
(350mm) (DR)
15
16
Allen Key (M4) 1
17

Fix the eight Minifix Bolts (2) to the bottom of the Desktop (C) and to the Drawer Front Panels (F) and (G)
using the predrilled holes.
4 OF 12
Part 1 x16
Part 2 x8
A
B
HI
K
L
F
G
C
Fix sixteen Wood Dowels (1) to Panel (A), Panel (B), Panel (H), Panel (I), Panel (K) and Panel (L) using a
rubber hammer.

Screw two Left Drawer Slides (3) to the Left Side Panel (A) and then two Right Drawer Slides (4)
to the Right Side Panel (B) using eight Euro Screws (5).
Part 3 (L) x 2pcs
Part 4 (R) x 2pcs
Part 6 x 4pcs
Part 5 x 8pcs
Part 17 x 1pcs
5 OF 12
Screw the Bottom Panel (D) to the Left Side Panel (A) and Right Side Panel (B) with Unitar Screws (6)
using predrilled holes.
A
B
A
B
D

6 OF 12
Part 8 x 4pcs
Attach four Bottom Legs (E) to the Bottom Panel (D) using eight CSK Screws (7) and the predrilled holes.
Part 7 x 8pcs
Insert four Cams (8) as shown making sure the arrows are pointing up. Attach the Cabinet Top (C) to the
assembled part by lowering the Minifix Bolts (2) into the predrilled holes. Turn the Cams (8) clockwise to
lock them into the Bolts (2).
A
B
D
E
E
E
E
A
B
C
D

Attach the Back Panel (N) to the cabinet by aligning the Back Panel with the edges of the cabinet.
Then use twenty-two Nail Pins (9) and a hammer to fix the Back Panel (N) to the cabinet.
Step 7:
Step 8:
Part 9 x 22pcs
7 OF 12
Part 10 x 8pcs
Small Drawer Assembly:
Attach the Small Drawer Back (J) to the Small Drawer Side Left (H) and Small Drawer Side Right (I) by
aligning the grooves and then securing with four CSK Screws (M4.7 x 38mm) (10).
Attach the Large Drawer Back (M) to the Large Drawer Side Left (K) and Large Drawer Side Right (L) by
aligning the grooves and then securing with four CSK Screws (M4.7 x 38mm) (10).
Large Drawer Assembly:
D
N
B
J
H
IM
K
L

8 OF 12
Step 9:
Step 10:
Small Drawer:
Large Drawer:
Slide the Drawer Bottom Panels (Z) into both the Small and Large drawers using the grooves of the side
drawer panels. (Be sure the finished side of the Bottom Panel (Z) is facing up/inside the drawer).
Insert the Metal Rods (11) into the Large Drawer Back (M) using predrilled holes.
M
Z
L
K
J
H
I
Z
Part 11 x 2pcs
Part 8 x 4pcs
M
L
K
G
F
J
H
I
Z
Z
Insert two Cams (8) as shown making sure the arrows are pointing toward the holes for the bolts. Attach
the Small Drawer Front (F) to the Small Drawer Side Left (H) and Small Drawer Side Right (I) by inserting
the Minifix Bolts (2) into the predrilled holes. Turn the Cams (8) clockwise to lock them into the bolts.
Insert two Cams (8) as shown making sure the arrows are pointing toward the holes for the bolts. Attach
the Large Drawer Front (G) to the Large Drawer Side Left (K) and Large Drawer Side Right (L). Insert the
Minifix Bolts (2) into the predrilled holes while at the same time aligning the Metal Rods with the holes in
the Drawer Front. Turn the Cams (8) clockwise to lock them into the Bolts.

9 OF 12
Step 11:
Step 12:
Attach a Right Drawer Slide (14-DR) and Left Drawer Slide (15-DL) to the bottom of each drawer using
four CSK Screws M3.5 x 15mm (16).
Attach an Aluminium Handle (12) to each drawer using two Handle Screws (13).
F
G
H
I
JM
K
Part 12 x 2pcs
Part 13 x 4pcs
Part 14 x 2pcs
Part 15 x 2pcs
Part 16 x 8pcs
F
G
L
Z
Z
I

10 OF 12
Step 13:
Insert the large drawer into the bottom slot of the cabinet by aligning slides. Then insert the smaller
drawer into the upper slot.
A
C
F
G