Onespace 50-41201 User manual

MODEL # 50-41201
SUPPLIER CODE: PMEX
ASSEMBLY INSTRUCTIONS
OneSpace is a Trademark of Comfort Products, Inc.
™
4 Cube Organizer, White
1 OF 10
For fastest service onclaims, requests for replacement parts, or
questions, please visit our website at
www.comfortproducts.net/support
e-mail: [email protected]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE

2 OF 10
Shelf maximum
weight capacity
=10lbs
Top maximum
weight capacity
=40lbs
1
2
3
4
5
6
7
8
8

3 OF 10
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART
WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
PART DESCRIPTION QTY
STOCK NO
1
51-41201A
Side Panel Left
1
1
51-41201B
Side Panel Right
2
1
51-41201C
Top Panel
3
1
51-41201D
Bottom Panel
4
PART DESCRIPTION QTY
STOCK NO
1
51-41201E
Shelf Panel
5
1
51-41201F
Center Panel
Top
6
1
51-41201G
Center Panel
Bottom
7
2
51-41201H
Back Panel
8
HARDWARE KIT
STOCK # 51-41201KIT
PART DESCRIPTION QTY
12
Minix Bolt 24mm
A
12
Cam
B
10
Dowel M6 x 30mm
C
D
E
F
8
CSK Screw (M4.7 x 38mm)
Allen Key (M4)
12
Cam Caps
1

Start assembling by xing the Dowels (C) to Side Panel Left (1), Side Panel Right (2), Shelf Panel (5)
Center Panel Top (6) and Center Panel Bottom (7).
Using a phillips head screwdriver, x the Minix Bolts (A) to Side Panel Left (1), Side Panel Right (2),
Top Panel (3) and Shelf Panel (5).
12
5
6
7
Part # C x 10
Part # A x 12
1
2
53
4 OF 10

Use two CSK Screws (D) to attach the Shelf Panel (5) and Center Panel Top (6). Make sure that the grooves
for the Back Panel are aligned. (These grooves are on the sides not shown in the drawing below).
Insert the Minix Cams (B) into the Center Panel Bottom (7). Attach the Center Panel Bottom (7)
to the Shelf Panel (5). While doing this make sure that the grooves for the Back Panel are aligned.
Tighten the two Minix Cams (B) clockwise and then cover them with Cam Caps (E).
6
5
Part # D x 2pcs
Part # B x 2pcs
6
5
7
Part # E x 2pcs
5 OF 10

1
75
6
Insert the Minix Cams (B) into the Shelf Panel (5). Attach Side Panel Left (1) to the Shelf Panel (5).
While doing this make sure that the grooves for the Back Panel are aligned. Tighten the two Minix
Cams (B) clockwise and cover them with Cam Caps (E).
Insert the Minix Cams (B) into the Shelf Panel (5). Attach Side Panel Right (2) to the Shelf Panel (5).
While doing this make sure that the grooves for the Back Panel are aligned. Tighten the two Minix
Cams (B) clockwise and cover them with Cam Caps (E).
Part # B x 2pcs
Part # E x 2pcs
Part # B x 2pcs
Part # E x 2pcs
1
2
5
6
7
6 OF 10

Slide in one Back Panel (8) with the nished side facing inside the cube.
Use six CSK Screws (D) to attach the Bottom Panel (4) to Side Panel Left (1), Side Panel Right (2) and
Center Panel Bottom (7). Make sure that the groove in the Bottom Panel (4) is aligned with the panel
which you have just inserted.
Part # D x 6pcs
8
7
1
2
6
Step 7:
Step 8:
1
2
7
4
7 OF 10
8

8 OF 10
Step 9:
Step 10:
1
2
6
8
Slide in the other Back Panel (8) with the nished side facing inside the cube.
Insert the Minix Cams (B) into the Side Panel Left (1), Side Panel Right (2) and Center Panel Top (6)
and attach the Top Panel (3). Tighten the six Minix Cams (B) clockwise and cover with Cam Caps (E).
Part # B x 6pcs
Part # E x 6pcs
3
1
1
6
4

9 OF 10

•
•
•
•
10 OF 10
DO NOT stand on the desk. Do not use the desk as a stepladder.
ed.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products, Inc.
P.O. Box 999
Memphis, TN 38101
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers
as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product mo sure
to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user
customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity is de
10 pounds for the shelves and 40 pounds for the top panel. For claims or questions concerning this warranty, please visit:
www.comfortproducts.net or email us at: [email protected]
MODEL: # 50-41201
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
www.comfortproducts.net
[email protected]
OneSpace is a Trademark of Comfort Products, Inc.
™