Open Plan Systems TRAINING TABLE User manual
TRAINING TABLE
PARTS OVERVIEW
Table Top (Sold separately)
Work Surface Support Bracket
Screw Holes
Screw Cover
Support Bar (attached to modesty panel)
Forward Legs
Folding Layer
Modesty Panel
Rear Legs
TRAINING TABLE
ASSEMBLY GUIDE
STEP 1:
1. Secure forward and rear legs using (4)
screw A and Allen Wrench A.
Screw A (4)
Screw C (2)
Allen wrench A
Screw B (4)
Allen wrench B
Screw Cover (2)
1
2
3 6
4
5
STEP 2:
1. Attach modesty panel to the legs using
the secure screws from Step 1 with Allen
Wrench A.
STEP 3:
1. Attach support bar to modesty panel using (4)
Screw B.
2. Attach Screw Covers to conceal screws.
STEP 4:
1. Attach work surface support bracket to both sides
of base using (2) Screw C and Allen Wrench B.
STEP 5:
1. Secure table top to base.
NOTE: Do not tighten screws before all screws are in place.
Table of contents
Other Open Plan Systems Indoor Furnishing manuals
Open Plan Systems
Open Plan Systems L2 Lumen User manual
Open Plan Systems
Open Plan Systems XPAND REACH Single Station Spine Fabric... User manual
Open Plan Systems
Open Plan Systems E-TABLE-2S-HOME-OFFICE User manual
Open Plan Systems
Open Plan Systems XPAND REACH User manual
Open Plan Systems
Open Plan Systems XPAND REACH User manual
Open Plan Systems
Open Plan Systems E-TABLE-2S-T-LEG User manual
Open Plan Systems
Open Plan Systems OPS-B14 IMPACT User manual
Open Plan Systems
Open Plan Systems MOTIVATE - MID BACK 820 User manual
Open Plan Systems
Open Plan Systems PGHM User manual
Open Plan Systems
Open Plan Systems XPAND UP User manual
