Oregon Scientific RMR202 User manual

EN
9
Indoor and Outdoor Thermometer with Atomic Time
Model:RMR202 / RMR202A
USER MANUAL

EN
1
Indoor and Outdoor Thermometer
with Atomic Time
Model:RMR202 / RMR202A
USER MANUAL
CONTENTS
Overview .....................................................................2
Front View ..............................................................2
Back View ..............................................................2
Remote Sensor .......................................................3
Getting Started ...........................................................3
Insert Batteries ........................................................3
Remote Sensor...........................................................3
Sensor Data Transmission...................................... 4
Clock ...........................................................................4
Clock Reception ......................................................4
Manually Set Clock .................................................4
Temperature and Humidity........................................ 5
Ice Warning .............................................................5
Reset...........................................................................5
Precautions................................................................5
Specifications ............................................................6
About Oregon Scientific ...........................................6
EU-Declaration of Conformity ..................................6
FCC Statement...........................................................6
Declaration of Conformity........................................7

EN
2
OVERVIEW
FRONT VIEW
4
1
2
3
6
8
510
9
7
1. Remote sensor reception indicator
2. Clock signal reception indicator
3. Indoor temperature
4. MODE:Change settings / display
5. / :Increase / decrease setting; activate /
deactivate clock reception signal
6. Outdoor temperature
7. Time zone (RMR202A only)
8. Clock with weekday
9. MEM:View current, maximum and minimum
temperature / humidity
10. Ice alert LED indicator
BACK VIEW
1. °C / °F:Select temperature unit
2. RESET:Reset unit to default settings
3. EU / UK:Select the nearest radio signal (RMR202
only)
3


EN
3
REMOTE SENSOR
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5. CHANNEL switch
GETTING STARTED
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
LOCATION MEANING
Clock / alarm Main unit batteries low
Outdoor temperature Sensor batteries low
and humidity area
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment.
2. Select a channel then press RESET.
3. Close the battery door.
4. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 1.5 m (5 ft) and which can shield it from direct
sunlight or wet conditions for an accurate reading.
1.5 m (5 ft)

EN
4
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold + MODE.
The sensor reception icon in the remote sensor area
shows the status:
ICON DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be
found.
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal.
RMR202:
Slide EU / UK to select the signal received.
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
RMR202A:
• WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
To enable / disable signal reception:
Press and hold to enable or to disable signal
reception.
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
If signal reception is unsuccessful, place your unit next
to a window, press and hold to force another signal
search.
Clock signal reception indicator:
STRONG
SIGNAL
WEAK
SIGNAL NO SIGNAL
MANUALLY SET CLOCK
To set the clock manually, disable the signal reception first.
1. Press and hold MODE.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format,

EN
5
hour, minute, year, calendar mode (day – month /
month – day), month, day and language.
RMR202: Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
RMR202A: Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
NOTE The language options are English (E), German
(D), French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with seconds /
weekday / calendar.
TEMPERATURE AND HUMIDITY
To toggle temperature unit:
Press °C / °F.
To auto-scan between sensors:
Press and hold + MEM to display each sensor’s data
for 3 seconds.
To end press .
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
ICE WARNING
If the channel 1 sensor falls between 3°C to -2 °C (37°F
to 28°F), LED indicator will flash, and will stop flashing
once the temperature is out of this range.
RESET
Press RESET to return to the default settings.
PRECAUTIONS
• Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
• Do not cover the ventilation holes with any items such
as newspapers, curtains etc.
• Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
• Do not tamper with the unit’s internal components.
This invalidates the warranty.
• Only use fresh batteries. Do not mix new and old
batteries.
• Images shown in this manual may differ from the
actual display.
• When disposing of this product, ensure it is collected
separately for special treatment.
• Placement of this product on certain types of wood
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture
manufacturer's care instructions for information.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
• Please note that some units are equipped with a

EN
6
battery safety strip. Remove the strip from the battery
compartment before first use.
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
SPECIFICATIONS
TYPE DESCRIPTION
MAIN UNIT
L x W x H 77 x 41.5 x 116.5mm
(3.03 x 1.63 x 4.59 in)
Weight 241g(8.5 oz)
without battery
Temperature range -5°C to 50°C
(23°F to 122°F)
Resolution 0.1°C (0.2°F)
Signal frequency 433 MHz
Power 2 x UM-4 (AAA) 1.5 V
batteries
REMOTE UNIT (THN132N)
L x W x H 96 x 50 x 22 mm
(3.78 x 1.97 x 0.87 in)
Weight 62g (2.22 ounces)
Transmission range 30m (98 ft) unobstructed
Temperature range -20°C to 60°C
(-4°F to 140°F)
Power 1 x UM-3 (AA) 1.5 V
batteries
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn
more about Oregon Scientific products. If you’re in
the US and would like to contact our Customer Care
department directly, please visit: www2.oregonscientific.
com/service/support
OR
Call 1-800-853-8883.
For international inquiries, please visit: www2.
oregonscientific.com/about/international
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Indoor
and Outdoor Thermometer with Atomic Time (Model:
RMR202 / RMR202A) is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC. A copy of the signed and dated Declaration of
Conformity is available on request via our Oregon Scientific
Customer Service.
COUNTRIES RTTE APPROVAL COMPLIED
All EC countries,Switzerland CH
and Norway N
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)

EN
7
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact
for support or sales. Please call our customer service
number (listed on our website at www.oregonscientific.
com, or on the warranty card for this product) for all
inquiries instead.
We
Name: Oregon Scientific, Inc.
Address: 19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
Telephone No.: 1-800-853-8883
declare that the product
Product No.: RMR202 / RMR202A
Product Name: Indoor and Outdoor Thermometer with
Atomic Time
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate,Phase 1,41
Man Yue St., Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference
that may cause undesired operation.

ES
1
Termómetro interior y exterior con
hora atómica
Modelo: RMR202 / RMR202A
MANUAL DE USUARIO
CONTENIDOS
Resumen.....................................................................2
Vista Frontal ............................................................2
Vista Trasera........................................................... 2
Sensor Remoto .......................................................3
Para Empezar .............................................................3
Cómo Introducir Las Pilas .......................................3
Sensor Remoto ..........................................................3
Transmisión de datos del sensor ............................4
Reloj ............................................................................4
Recepción del reloj.................................................. 4
Ajuste Manual Del Reloj.......................................... 5
Temperatura y humedad ........................................... 5
Aviso De Hielo......................................................... 5
Reinicio....................................................................... 6
Precaucion..................................................................6
Ficha Técnica .............................................................6
Sobre Oregon Scientific............................................ 7
EU-Declaración De Conformidad ............................. 7

ES
2
RESUMEN
VISTA FRONTAL
4
1
2
3
6
8
510
9
7
1. Indicador de recepción del sensor remoto
2. Indicador de recepción de la señal del reloj
3. Temperatura interior
4. MODE: Cambiar configuración / pantalla
5. / :Subir o bajar ajuste ; activar o desactivar la
señal de recepción del reloj
6. Temperatura exterior
7. Zona horaria (sólo RMR202A)
8. Reloj con día de la semana
9. MEM: Visualizar temperatura / humedad máxima,
mínima y actuales
10. Indicador de alerta de hielo LED
VISTA TRASERA
1. °C / °F:Selección de unidad de temperatura
2. RESET:La unidad vuelve a los ajustes
predeterminados
3. EU / UK:Seleccionar la señal de radio más cercana
(sólo RMR202)
3
