Oricom secure 910 User manual

1
Contact details for Oricom Support and Express Warranty Claims in Australia
Oricom International Pty Ltd
Unit 1, 4 Sovereign Place
South Windsor, NSW 2756 Australia
(Monday to Friday 8am to 6pm AEST)
Email: [email protected]
Phone: [phone] or 02 4574 8888
Web: www.oricom.com.au
Fax: [phone]
Contact details for New Zealand
Email: [email protected]
Phone: [phone]
(Monday to Friday 10am to 8pm NZST)
Web: www.oricom.co.nz
Ref: 23012014

2
USER GUIDE
Baby Monitor
Secure 910
KEEP THIS USER GUIDE FOR FUTURE REFERENCE
Always retain your proof of purchase in case of warranty service and register your product
on line at:AUSTRALIA: www.coricom.com.au NEW ZEALAND: www.oricom.co.nz

2
SAFETY INFORMATION
TABLE OF CONTENTS
NEEd HELp?
If you need assistance setting up or using your Oricom product
now or in the future, call Oricom Support.
Australia 1300 889 785 or 02 4574 8888
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10am – 8pm NZST
SAFETY INFORMATION 3
YOUR BABY MONITOR 5
GETTING STARTEd 6
OpTIONAL BATTERIES 8
USING YOUR MONITOR 9
pARENT UNIT MENUS 13
TROUBLESHOOTING 17
CARE ANd MAINTENANCE 18
CUSTOMER SUppORT 19
EXpRESS WARRANTY 20

3
SAFETY INFORMATION
TABLE OF CONTENTS
Important Safety Information
• It is very important that you read the User Guide carefully as it contains detailed
information you will need to get the most from your Oricom baby monitor. If you
have any issues setting up or using your Oricom baby monitor please call our
Customer Support team. Our dedicated local team are more likely to be able to
help you than the retailer where you made your purchase.
• Your Oricom baby monitor is designed to be an aid and should not be used as
a substitute for responsible and proper adult supervision of a child.
• The baby monitor has been designed to provide some added reassurance in the
form of sound transmission for those times when you are not in the same room
as your baby provided you always stay within hearing range of the baby monitor
during use. Your baby monitor is not a medical device, nor a device to prevent
cases of Sudden Infant Death Syndrome (SIDS) or "cot death", and you should
not rely on it for your baby's wellbeing. It is important that you regularly check
on your baby personally.
• Make sure the baby unit, parent unit and mains adaptor cables are kept out
of reach of your baby and other young children at all times, at least one metre
away.
• Never place the baby unit or parent unit inside your baby’s cot, bed or playpen.
• Never cover the parent or baby units with clothes, towels or blankets or any
other item. Never use or place your parent or baby unit in or near moisture or
water (e.g. near bath or pool). Immersing in water could cause electric shock
and even death.
• The installation location plays an important role in ensuring proper operation.
Therefore, maintain a distance of at least one metre from other electronic equip-
ment, such as microwave ovens or hi.fi devices, otherwise they could cause
interference. During continual use the baby unit power adaptors may become
warm to the touch. This is normal and should not be a concern.
Risk of suffocation!
Keep all packaging materials and protective foils out of reach of children.
Warning
!
Do not place the AC Adaptor cable in a high “wear and tear” location. Never use a frayed or
compromised cord.
Warning
!

4
YOUR BABY MONITOR
SAFETY INFORMATION
Battery safety
• Batteries represent a hazard to health and the environment! They contain toxic,
ecologically hazardous heavy metals. Do not dispose of batteries in a fire as
they may explode. Dispose of batteries according to local regulations, never in
your household rubbish.
• Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries.
If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens,
immediately flush the affected areas with water, and seek medical assistance.
• Do not modify, remanufacture, attempt to insert foreign objects into the battery,
or immerse or expose it to water or other liquids. Batteries may explode if dam-
aged.
• Improper use or use of unapproved batteries may present a risk of fire, explo-
sion, or other hazard, and may invalidate any approval or warranty.
• If you believe the battery is damaged, remove product from the charger and
stop using the product. Contact Oricom for assistance. Never use a damaged
battery.
Disposal
Always dispose of your products at the end of their life in accordance with your lo-
cal waste disposal requirements.
Packaging materials all cardboard and paper packaging should be recycled in ac-
cordance with your local council waste regulations.
Do you have everything?
Package contents:
• Parent unit (LCD screen)
• Baby unit (camera)
• 3 x AC power adaptors
• User Manual
If any items are missing, please contact Oricom Customer Support.
Prior to use remove all protective packaging and films, and fully unwind all cords.

5
YOUR BABY MONITOR
SAFETY INFORMATION
1. LCD Screen
2. Microphone
3. Music Selection (Zoom in: left) button
4. Zoom (Camera selection in quad
mode) button
5. Motion detection (Zoom in: up) button
6. Talkback (Zoom in: right) button
7. VOX (Zoom in: down) button
8. Brightness down (Menu: left/exit)
button
9. Power (Menu) button
10. Volume up (Menu up) button
11. Brightness up (Menu: right/ok)
button
12. Volume down (Menu: down)
button
13. Motion detection indicator LED
14. VOX indicator LED
15. Power indicator LED
16. Speaker
17. Volume indicator LED
18. Battery compartment
19. Holder / Stand
20. Power adaptor connection
1. Antenna
2. Power indicator LED
3. Infrared LEDs
4. Lens
5. Nightlight
6. Nightlight switch
7. Microphone
8. Speaker
9. Battery compartment
10. Temperature sensor
11. Power On/Off switch
12. Power adaptor connection

6
GETTING STARTEd
GETTING STARTEd
1. Camera Setup
1.1 Power supply
a) Connect the small plug of the power adaptor to the baby unit and the other
end to the electrical mains power outlet.
b) To switch on the baby unit, slide the power switch to the ON position. The
power LED will light up.
c) To switch off the baby unit, slide the power switch to the OFF position.
1.2 Batteries
In case of power failure the baby unit can be fitted with 4 x AAA alkaline bat-
teries (not supplied).
To install the batteries use a small screwdriver to open the battery compart-
ment on the rear of the camera unit. Leaving the ribbon under the batteries,
insert the batteries observing the correct polarity indicated in the battery com-
partment. The ribbon is used for easy removal of batteries.Close the battery
compartment again and secure the screw in place.
Please check and replace these batteries after each power failure or every 12
months.
1.3 Connecting and aligning the baby unit
Position the baby unit with a minimum distance of 1 metre to other electronic
devices to avoid a risk of mutual disturbance. Point the upper section of the
baby unit towards the baby you wish to monitor. The baby unit should be at
least 1 metre away from the baby. Check that the baby is suitably displayed on
the parent unit screen. Adjust the viewing angle by gently rotating the camera
head until the baby is clearly visible.
Use only the AC adaptor supplied with the product as other power adaptors could
damage the product. This product is designed for indoor use only.

7
GETTING STARTEd
GETTING STARTEd
2. Parent Unit Setup
2.1 Power supply
a) Connect the small plug of the power adaptor to the socket in the side of the
parent unit and the other end to the electrical mains power outlet.
b) Switch the parent unit on by pressing and holding the power button for 2
seconds.
c) To switch the parent unit off, press and hold the power button for 2 sec-
onds.
NOTE:
The parent unit has been supplied with 2 x AC power adaptors to enable
the parent unit to be conveniently relocated to a second location without
the need for the power adaptor to be moved also.

8
USING YOUR MONITOR
OpTIONAL BATTERIES
2.2 Optional battery usage
The parent unit can be operated with a 3.7V 1050mAh battery (li-ion, BL-5C
phone type battery), not supplied. The optional battery can be inserted into
the parent unit to enable short duration portability. The optional battery can be
purchased from your local battery stockist.
2.2.1 Loading the battery
a) Open the battery compartment on the parent unit by sliding the battery
cover away from the unit.
b) Insert the battery with the battery contacts connecting to the metal pins on
the unit.
c) Close the battery compartment cover, ensuring it is securely locked.
d) Connect the AC power adapter to the parent unit to charge the battery. The
power LED will illuminate blue to indicate the battery is charging.
e) Press the power button to turn the unit on.
2.2.2 Battery endurance
The battery endurance will depend on the quality of the battery installed and
the age of the battery. A brand new, fully charged, good quality battery is es-
timated to last approx. 1 hour off the charger.
When the battery life is diminished, the battery will need replacing. This will
depend on the quality of the batteries installed.
It is recommended to remove the battery from the parent unit if not being
used for prolonged periods of time.
2.2.3 Battery indicators
• The power LED will illuminate blue when the battery is charging.
• The power LED will flash red when battery level is low.
• The parent unit will beep when the battery level is low.
• The power LED will illuminate green when power is sufficient.
When the monitor indicates the power is low, connect the AC power adaptor
to the unit to provide power and charge the battery.

9
USING YOUR MONITOR
OpTIONAL BATTERIES
3. Baby unit features
3.1 Nightlight
The nightlight provides a comforting glow on the baby unit.
To turn on, press the nightlight button on the side of the baby unit.
To turn off, press the same button again.
3.2 Night vision
The camera has 9 high-intensity LEDs for picking up clear images in low light.
When the built-in photo sensor detects low ambient light levels, the LEDs will
automatically activate and the screen on the parent unit will display in black
and white.
3.3 Room temperature indication
The temperature sensor on the baby unit provides an indication of the room
temperature at the camera location. The indicated temperature is displayed on
the parent unit LCD.
4. Parent unit features
4.1 Volume
Press the volume selection buttons and on the parent unit to
adjust the volume.

10
USING YOUR MONITOR
USING YOUR MONITOR
4.2 Brightness
Press the brightness selection buttons and to adjust the brightness of
the parent unit screen.
4.3 VOX (Voice Activated Transmission)
Press the VOX button on the parent unit. This will turn off the screen but
the VOX LED will remain on (green).
When the transmitted sound reaches a set level, the screen will turn on auto-
matically.
It will turn off again after 30 seconds. To turn VOX off, press the VOX button
again.
4.4 Motion Detection
Press the motion detection button on the parent unit. The motion de-
tection LED will remain on (green). When the baby movement detected by the
camera unit reaches the level as defined in the menu settings, a warning sound
will be emitted from the parent unit.
Press the motion detection button again to turn off.
NOTE: Motion detection requires the screen to be ‘on’ constantly to de-
tect motion. Therefore, VOX and Motion Detection cannot be turned on at
the same time.

11
USING YOUR MONITOR
USING YOUR MONITOR
4.5 Music
Music can be played through the baby unit and is remotely activated through
the parent unit. There are 3 tunes available.
Press the music button to play music through the baby unit.
Press the music button again to play the next song. The selected tune will dis-
play on the screen. The options are 1, 2, 3 or off.
4.6 Talkback
Press and hold the talkback button on the parent unit to talk to your baby
through the baby unit loudspeaker. The talk symbol will be displayed in the top
right corner of the parent unit when you are transmitting.
4.7 Zoom
When the monitor is in single camera view (full screen), press the zoom button
.The viewing area will change to x2 zoom mode immediately.

12
pARENT UNIT MENUS
USING YOUR MONITOR
The following buttons can then be used to navigate the screen:
Press to move the display up.
Press to move the display down.
Press to move the display to the left.
Press to move the display to the right.
When the parent unit is in x2 zoom mode, press the zoom button again to re-
turn to x1 full screen view.
4.8 Parent Unit Single Screen Icons
1. Camera number indicator
2. Signal strength indicator
3. Zoom indicator
4. Temperature alert on/off indicator
5. Room temperature indicator
6. Music indicator
7. Talkback indicator
8. Battery level indicator
9. Volume indicator
10. Brightness indicator
1
9
10
2 3 4 5 7
68

13
pARENT UNIT MENUS
USING YOUR MONITOR
5. Menu Navigation
To access the menu options on the parent unit LCD, press the power/menu
key:
The following buttons can be used to navigate through the menu levels:
Press to move up.
Press to move down .
Press to move left and exit the menu.
Press to move right and to select the next menu level .
Press or to confirm a setting .
The main menu contains 6 submenus.
5.1 Camera selection
This menu allows you to select which camera to view in full screen mode, or al-
ternatively allows the selection of “split screen”. Split screen displays the video
of all 4 cameras simultaneously in quad mode.

14
pARENT UNIT MENUS
pARENT UNIT MENUS
5.2 Temperature setting
This menu allows you to select the temperature display in either degrees Cel-
sius or Fahrenheit.
You can set the temperature range using the upper and lower temperature
alerts. If you select “Yes” to enable the Temperature Alert and the temperature
surrounding the baby unit is outside of this range, a warning sound will be
emitted from the parent unit.
5.3 Motion Detection Sensitivity
This submenu allows you to set the motion detection sensitivity level.
This should be set according to the environment.

15
pARENT UNIT MENUS
pARENT UNIT MENUS
5.4 VOX Sensitivity
This submenu allows you to choose the sensitivity level of the voice activated
transmission. With the level set to high, the microphone will detect lower level
sounds.
5.5 ADD/DEL Camera
The system comes with a camera unit already paired with the parent unit. The
pairing function gives each baby unit a separate channel on the parent unit.
This is necessary for pairing additional cameras.
5.5.1 Adding a new camera
1) From the ADD/DEL Camera menu, press the right button to select the
camera list.
2) Using the up and down buttons, select the camera number you
wish to add. Eg: Camera 2
3) Press the right button again to display the camera options.
4) Select “Yes” and press the menu button to confirm.
5) Press and hold the nightlight button on the camera unit until the camera
registers to the parent unit.

16
TROUBLESHOOTING
pARENT UNIT MENUS
5.5.2 Deleting an existing camera
1) From the ADD/DEL Camera menu, press the right button to select the
camera list.
2) Using the up and down buttons, select the camera number you wish to de-
lete.
3) Press the right button again to display the camera options.
4) Select “Yes” and press the menu button to confirm the deletion of the se-
lected camera.
5.6 Restore Default
This menu allows you to reset the monitor to factory default settings. All menu
settings will then be reset.
•
NOTE:
1. Pairing settings will not be affected by a reset.
2. When you select “Yes” to reset the monitor, the monitor will turn off
automatically. Press the POWER button to turn the monitor on again.

17
TROUBLESHOOTING
pARENT UNIT MENUS
Should you experience difficulties operating the SC910 please refer to the
troubleshooting guide below. If you still experience difficulties please contact
Oricom Support on 1300 889 785 for assistance.
Issue Troubleshooting
Equipment does not
function
.Check both parent unit and baby unit are turned on.
. Check parent unit is connected to power or rechargeable battery is charged
(not supplied).
.Check baby unit is connected to power.
“Out of Range” display-
ing on parent unit
.Move the parent unit closer to the baby unit.
.Register the baby unit to the parent unit.
Reception interfer-
ence
.Move the parent unit closer to the baby unit.
.Reposition the baby unit slightly.
. Check for interference from other electronic devices such as Wi-Fi or micro-
waves.
High pitched or howl-
ing noise from parent
unit–feedback
. Increase the distance between the parent unit and baby unit.
.Reduce the volume on the parent unit.
Picture but no sound .Increase the volume on the parent unit.
Picture is in black
and white .Night function is active. Increase the light level in the baby’s room if required.
Parent unit emitting
chimes .Move the parent unit closer to the baby unit until they are within the range.
No picture on unit . VOX function is activated. Turn off VOX in the menu settings if required.
. Baby unit may be out of range. Move the parent unit closer to the baby unit.
Picture on parent
unit only displayed in
quarter of screen
. Split screen function is on. Select the camera you would like to view in full
screen via the menu settings.
Parent unit emitting
horn alert
. Motion detection alert is active. Turn off or adjust the sensitivity in the menu
settings.
. Temperature alert is active; room temperature is above or below set param-
eters. Adjust the room temperature, or the alert parameters in the menu set-
tings.
Parent unit emitting
double beep
. Rechargeable battery (not supplied) power level is low. Connect the power
adaptor to the parent unit.
Red power light
flashing on parent
unit
. Rechargeable battery (not supplied) power level is low. Connect the power
adaptor to the parent unit.
Optional battery not
charging
. Check the battery is connected to the battery connection in the battery com-
partment. After a period of time, the battery may need to be replaced due to
everyday usage. Please contact your local battery retailer for replacement
batteries.

18
CUSTOMER SUppORT
CARE ANd MAINTENANCE
Care and maintenance of your new baby monitor:
• Keep all parts and accessories out of reach of children
• Ensure the baby unit is located at least 1 metre away from the baby you are
monitoring.
• Fingerprints or dirt on the lens surface of the camera can adversely affect the
camera performance. Avoid touching the lens of the camera.
• Should the lens become dirty, use a soft, dry cloth to wipe off the lens.
• Keep the camera dry. Precipitation, humidity and other liquids contain minerals
that will corrode electronic circuits.
• Do not use or store in dusty or dirty areas.
• Do not store in hot areas. High temperatures can shorten the life of electronic
devices and warp or melt certain plastics.
• Do not store in very cold areas. When the system warms up to room tempera-
ture, moisture can form inside the case which will damage the electronic circuit
boards.
• Do not attempt to open the casing. Non-expert handling of the device may
damage the system and will void the warranty.
• Avoid dropping the unit, or strong shocks.
• Operate this unit only with the power supplies provided with the unit or author-
ised accessories.
Changes or modifications to the unit will void the warranty on your purchase and
may cause electrical damage or shocks.

19
CUSTOMER SUppORT
CARE ANd MAINTENANCE
Customer Support
If you have any problems setting up or using this product you will find useful tips
and information in the Troubleshooting sectionof this user guide as well as “Fre-
quently Asked Questions” on our website www.oricom.com.au.
If you have further questions about using the product after reviewing the resources
above or would like to purchase replacement parts or accessories please call our
Customer Support Team. Our dedicated local support team are more likely to be
able to help you than the retailer where you made your purchase.
Important
Please retain your purchase receipt and attach to the back page of your user guide
as you will need to produce this if warranty service is required. Take a few mo-
ments to register your product online: www.oricom.com.au.