Oricom Secure 610 User manual

Premium DECT
Digital Baby Monitor
Secure 610
User Guide

2TABLE OF CONTENTS
IMPORTANT SAFETY INFORMATION ......................................................... 3
GETTING STARTED .................................................................................... 6
ORICOM DIGITAL BABY MONITOR ............................................................ 7
SETTING UP.............................................................................................. 13
USING YOUR DIGITAL BABY MONITOR ................................................... 18
TROUBLESHOOTING ................................................................................ 39
CUSTOMER SUPPORT.............................................................................. 41
WARRANTY............................................................................................... 42
Need Help?
If you need assistance setting up or using your Oricom product now or in the
future, call Oricom Support.
Australia 1300 889 785
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10am – 8pm NZST

3IMPORTANT SAFETY INFORMATION
Important Safety Information
s )TISVERYIMPORTANTTHATYOUREADTHE5SER'UIDECAREFULLYASITCONTAINSDETAILED
information you will need to get the most from your Oricom Baby Monitor. If you
HAVEANYISSUESSETTINGUPORUSINGYOUR/RICOM"ABYMONITORPLEASECALLOUR
Customer support team. Our dedicated local team are more likely to be able to
help you than the retailer where you made your purchase.
s 9OUR/2)#/-"ABY-ONITORISDESIGNEDTOBEANAIDANDSHOULDNOTBEUSED
ASASUBSTITUTEFORRESPONSIBLEANDPROPERADULTSUPERVISIONOFACHILD
s 4HE"ABY-ONITORHASBEENDESIGNEDTOPROVIDESOMEADDEDREASSURANCEIN
the form of sound transmission for those times when you are not in the same
ROOMASYOURBABYPROVIDEDYOUALWAYSSTAYWITHINHEARINGRANGEOFTHEBABY
MONITORDURINGUSE9OUR"ABY-ONITORISNOTAMEDICALDEVICENORADEVICE
TOPREVENTCASESOF3UDDEN)NFANT$EATH3YNDROME3)$g3ORCOTDEATH
ANDYOUSHOULDNOTRELYONITFORYOURBABYgSWELLBEING)TISIMPORTANTTHATYOU
regularly check on your baby personally.
s -AKESURETHE"ABYUNIT0ARENTUNITANDMAINSADAPTORCABLESAREKEPTOUT
of reach of your baby and other young children at all times, at least one metre
away.
s .EVERPLACETHEBABYUNITORPARENTUNITINSIDEYOURBABYSCOTBEDORPLAYPEN
s .EVERCOVERTHE0ARENTORBABYUNITSWITHCLOTHESTOWELSORBLANKETSORANY
OTHERITEM.EVERUSEORPLACEYOUR0ARENTOR"ABYUNITINORNEARMOISTUREOR
water (e.g. near bath or pool). Immersing in water could cause electric shock
ANDEVENDEATH

4
s 4HEINSTALLATIONLOCATIONPLAYSANIMPORTANTROLEINENSURINGPROPEROPERATION
Therefore, maintain a distance of at least one meter from other electronic
EQUIPMENTSUCHASMICROWAVEOVENSORHI¥lDEVICESOTHERWISETHEYCOULD
CAUSEINTERFERENCE$URINGCONTINUALUSETHE"ABYUNITPOWERADAPTORSMAY
become warm to the touch. This is normal and should not be a concern.
Battery safety
s "ATTERIESREPRESENTAHAZARDTOHEALTHANDTHEENVIRONMENT
s 4HEYCONTAINTOXICECOLOGICALLYHAZARDOUSHEAVYMETALS$ONOTDISPOSEOF
BATTERIESINAlREASTHEYMAYEXPLODE$ISPOSEOFBATTERIESACCORDINGTOLOCAL
REGULATIONSNEVERINYOURHOUSEHOLDRUBBISH
s $ONOTDISMANTLECUTOPENCRUSHBENDPUNCTUREORSHREDCELLSORBATTERIES
If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens,
immediately flush the affected areas with water, and seek medical assistance.
s 
$ONOTMODIFYREMANUFACTUREATTEMPTTOINSERTFOREIGNOBJECTSINTOTHEBATTERYOR
immerse or expose it to water or other liquids. Batteries may explode if damaged.
IMPORTANT SAFETY INFORMATION
2ISKOFSUFFOCATION
+EEPALLPACKAGINGMATERIALSANDPROTECTIVEFOILSOUTOFREACHOFCHILDREN
$ONOTPLACETHE!#!DAPTORCABLEINAHIGHWEARANDTEARLOCATION.EVERUSEA
frayed or compromised cord.

Warning

5IMPORTANT SAFETY INFORMATION
s 5SEONLYTHEBATTERIESSUPPLIEDWITHTHEPRODUCT)MPROPERUSEORUSEOF
UNAPPROVEDBATTERIESMAYPRESENTARISKOFlREEXPLOSIONOROTHERHAZARDAND
MAYINVALIDATEANYAPPROVALORWARRANTY
s )FYOUBELIEVETHEBATTERIESAREDAMAGEDREMOVEPRODUCTFROMTHECHARGERAND
STOPUSINGTHEPRODUCT#ONTACT/RICOMFORASSISTANCE.EVERUSEADAMAGED
battery.
Disposal
Always dispose of your products at the end of their life in accordance with
your local waste disposal requirements.Packaging materials all cardboard
and paper packaging should be recycled in accordance with your local council
waste regulations.

6GETTING STARTED
This User Guide provides you with all
the information you need to get the most
from your Oricom Digital Baby Monitor.
Please read this guide carefully and keep
it for future reference.
Need help?
If you need assistance setting up or using your
/RICOM$IGITAL"ABY-ONITORCALLOUR3UPPORT
team on 1300 889 785. If you would like any
additional or replacement rechargeable batteries
for the parent unit (Part No.BAT1300MAH) order
online at www.oricom.com.au.
/URDEDICATEDADVISORSAREMORELIKELYTOBEABLE
to help you than the retailer where you made your
purchase.
!LTERNATIVELYYOUMAYlNDTHEANSWERINTHE@(ELP
section at the back of this guide.
Additional answers to Frequently Asked Questions
AREALSOAVAILABLEFROMWWWORICOMCOMAU
'OTEVERYTHING
s "ABYUNIT
s 0ARENTUNIT
s X!!.I-(M!H
rechargeable batteries for
Parent unit (pre-installed)
s 0ARENTUNITCHARGER
s XPOWERADAPTERS
s MMAUXAUDIOLEAD

oricom
7ORICOM DIGITAL BABY MONITOR
Parent unit
)NDICATESTHELEVELOFRECEIVED
SOUND4HE,%$SWILLLIGHTUP
PROGRESSIVELYASTHESOUND
increases. See page 19 for
further information.
Press to switch the torch
feature on and off.
Red indicates that Mute All has
been switched on.
Amber indicates that Mute Low
has been switched on.
0OWERSAVINGBACKLIGHTTURNS
on when you press any button and
then switches off after 15 seconds.
Press to open the menu.
Press and hold to exit the menu
and return to the idle screen.
$ECREASESPEAKERVOLUME
Scroll through the
menu options.
)NCREASESPEAKERVOLUME
Scroll through the menu options.
0RESSTOCONlRMTHEMENUOPTION
displayed.
Red light indicates the batteries
are low and need re-charging.
Steady green indicates that the
Baby and Parent units are linked.
Flashes green if no link established
for 30 seconds. Flashes red if no
link established after 30 seconds.
Also flashes green when the Talk
button is pressed on the Parent
unit to initiate parental talk back.
Press and hold to
switch the power
on or off.
Press to toggle the
0ARENTUNITRECEIVE
VOLUMEBETWEEN
on and off.
Press to toggle the
Baby unit microphone
SENSITIVITYBETWEEN
normal and Mute Low.
Press to switch the music on the
Baby unit on or off.
Press to switch the Nightlight
on the Baby unit on or off.
Press to switch the Lightshow
on the Baby unit on or off.
Press to talk to your baby.
Baby sound level LEDs
Torch (on back of unit)
Mute LED
LCD Display
Menu
Down Up
OK
Battery status LED
Link indicator
Power on/off
(on top of unit)
Mute All
(on top of unit)
Mute Low
(on top of unit)
Microphone
Talk (on side of unit)

8ORICOM DIGITAL BABY MONITOR
Parent unit display icons
Menu options:
Lightshow Nightlight Music Feed Timer Setup
Battery status









4EMPERATUREALERTVIBRATEON
4EMPERATUREALERTVIBRATEOFF
$ISPLAYSTHETEMPERATUREAS
measured at the Baby unit
#RYINGALERTVIBRATEON
#RYINGALERTVIBRATEOFF
&EEDTIMERONVIBRATEON
&EEDTIMERONVIBRATEOFF
Full charge (75-100%)
Medium charge (51-74%)
Low charge (25-50%)
Empty (8-24%)
Flashing (0-7%). Typically you
will be able to use your Parent
unit for at least one hour after
the battery icon starts to flash.
Icon will scroll when charging
indicates when you can scroll
up or down through the menu
options

9
Parent unit charger
Front
Back
Charging light
Power socket
Red when the Parent unit is
correctly placed on the charger.
For connection to the mains
POWERSOCKETVIATHEPOWER
adaptor cable supplied.
ORICOM DIGITAL BABY MONITOR

10
Baby unit
Press to switch the
Nightlight on or off.
Press to switch the
Lightshow on or off.
Press and hold to switch
the power on or off.
Press to emit an alert
beep from the Parent
UNITnUSEFULFORlNDING
THE0ARENTUNITIFYOUVE
misplaced it.
Illuminates around the base.
Nightlight
Lightshow
Power on/off
Find (on side of unit)
Nightlight
Microphone
Make sure the sensor is placed
with clear space around it and
not in contact with any surfaces
TOENSUREITWORKSEFFECTIVELY
Press to switch music on at
the Baby unit
(the music and duration will
be as last set at the Parent
unit).
Press again to switch the
music off.
Increase or decrease the
LOUDSPEAKERVOLUMEFORPLAYING
music or for parental talk back.
Steady green indicates that
the Baby and Parent units are
linked. Flashes green if no link
established for 30 seconds.
Flashes red if no link established
after 30 seconds. Also flashes
green when the Talk button is
pressed on the Parent unit to
initiate parental talk back.
Temperature sensor
Music
Volume +/–
Link indicator
ORICOM DIGITAL BABY MONITOR

mAh
11
For connection to the mains
POWERSOCKETVIATHEPOWER
adaptor cable supplied.
Power socket
(see page 25)
(see page 26)
5SETOPLUGINANEXTERNALAUDIO
source, e.g. MP3 player, so you
can play your own choice of
music to your baby.
Lightshow tilt control
Lightshow focus
control
Auxiliary input socket
Back of Baby unit
ORICOM DIGITAL BABY MONITOR

12
Parent unit menu map
Lightshow
Turn (On/Off)?
Brightness
Timer
Turn (On/Off)?
Brightness
Timer
(Play/Stop)?
Choose Song
Timer
(Start/Stop) Timer
Duration
Timer Repeat
Timer Alert
Crying Alert
Temp Alert
Backlight
Nightlight
Music
Feed Timer
Setup
Menu
High
Medium
Low
High
Medium
Low
Beep
Beep&Vibe
Vibrate
Scroll Options
Play All
Set Time
Scroll Options
Play All
Scroll Options
Play All
Repeat On
Repeat Off
On w alerts
Off w alerts
5 min
10 min
15 min
Constant
5 min
10 min
15 min
Constant
5 min
10 min
15 min
Constant
Beep
Beep&Vibe
Vibrate
Screen only
Off
Beep
Beep&Vibe
Vibrate
Screen only
Lullabies
Nature
Classical
External
ORICOM DIGITAL BABY MONITOR

13SETTING UP
Remove this tab and charge
batteries for 16 hours before use.
DO NOT USE ALKALINE
BATTERIES IN THIS PRODUCT
Parent unit
1. Plug one of the power adaptor cables into the socket marked on the back of
the Parent unit charger and plug the other end into the mains power wall socket
and switch the power on.
!CTIVATETHEBATTERIESBYPULLINGTHEPLASTICTABAWAYFROMTHEBACKOFTHE0ARENT
unit.

14 SETTING UP
3. Place the Parent unit into the charger. The red charging light will illuminate on
the charger and the battery icon will start scrolling on the Parent until display to
indicate that the batteries are being charged.
,EAVETHEBATTERIESTOCHARGEFORHOURSIFTURNEDOFFORHOURSIFTURNED
on) to reach maximum charge. When the batteries are fully charged the battery
icon on the display will show a full charge .
oricom
Low battery indicator
Battery icon
Charging light
/NLYUSETHEPOWERADAPTORSSUPPLIED5SINGINCORRECTPOWERADAPTERSMAY
permanently damage your product. This product is designed for indoor use only.
Warning


15
Battery performance
Please note that new
BATTERIESDONOTREACHFULLCAPACITYUNTILTHEYHAVEBEENINNORMALUSEFORSEVERALDAYS
The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the
PERFORMANCETIMEOFTHE0ARENTUNIT%VENTUALLYTHEYWILLNEEDTOBEREPLACED.EWBATTERIESCANBE
OBTAINEDFROMTHE/RICOM$IGITAL"ABY-ONITOR3UPPORT#ENTRE
4HE0ARENTUNITRECHARGEABLEBATTERIESWILLLOSECHARGEOVERAPERIODOFTIMEEVENIFSWITCHEDOFF
Battery low warning – Parent unit
When the batteries are low – approximately within 1 hour of running out – the Parent unit will emit
a low battery alert, the low battery indicator will turn red, the display will show Low Battery and the
icon will flash. Place the Parent unit back on the charger to charge the batteries. To speed up the
CHARGINGPROCESSTURNTHE0ARENTUNITOFFWHENCHARGINGIFITSNOTBEINGUSED
Baby unit
1. Plug the remaining power adaptor cable into the socket marked on the back
of the Baby unit and plug the other end into the mains power and switch on.
mAh
SETTING UP

16
Switch on and link the Parent and Baby units
1. Press and hold the button on the Baby unit until the nightlight briefly
illuminates and the green Link indicator flashes.
2. Press and hold the BUTTONONTHE0ARENTUNITUNTILALLTHE,%$SONTHEUNIT
briefly illuminate. The green Link indicator will flash and the display will show I’m
Linking.
Removing the batteries
)FYOUEVERNEEDTOREMOVETHEBATTERIESSIMPLYSLIDEOPENTHEBATTERYCOMPARTMENTCOVERANDUSETHE
RIBBONTOEJECTTHEBATTERIES
Once the units are linked the green Link indicator on the Parent unit and the Baby
unit will stop flashing and remain a steady green. The units are now ready to use.
4HELINKCONlRMATIONBETWEENTHETWOUNITSISVITALFORUSESOTHEYCANCOMMUNICATE)F
the link between the units is broken at any time, the Link indicators on both units will flash
green as they try to search for each other. The Parent unit displays I’m Linking...After 30
seconds, if the link is still broken, the Baby and Parent units Link indicators will flash red.
The Parent unit display will show No Link and you will hear an alert signal.
IMPORTANT
.EVERUSENONRECHARGEABLEBATTERIESINTHE0ARENTUNIT/NLYUSETHERECOMMENDED
TYPEnX!!.I-(M!HBATTERIES5SINGOTHERTYPESCOULDPERMANENTLY
damage the unit. Charge the batteries as instructed in this user guide. The Parent unit
can still be used when it is in the charger.
Warning
SETTING UP



17
If the link is broken:
s CHECKTHATTHEMAINSPOWERISPLUGGEDINANDSWITCHEDONATTHE"ABYUNIT
s CHECKTHATBOTHUNITSARESWITCHEDON
s CHECKTHATTHEBATTERIESARECHARGEDINTHE0ARENTUNIT
s CHECKTHATTHE0ARENTAND"ABYUNITSAREWITHINRANGEOFEACHOTHERINIDEAL
conditions the range is up to 300 metres outdoors and 50m indoors)
Positioning your units
The Baby unit should ideally be within 1m-2m of your baby for best performance.
If you place the Parent and Baby units too close together you will hear a high pitched noise, this is
normal. The units are designed to be located at a distance from one another, e.g. in separate rooms.
SETTING UP

18 USING YOUR DIGITAL BABY MONITOR
Switching on/off
Switch the Baby unit on
1. Press and hold the button until the nightlight briefly illuminates and the
green Link indicator flashes.
Once linked the green Link indicator will remain on.
Switch the Parent unit on
1. Press and hold the BUTTONONTHE0ARENTUNITUNTILALLTHE,%$SBRIEmY
illuminate. The green Link indicator will flash and the display will show I’m
Linking.
Once the units are linked the green Link indicators on the Parent and Baby
units will stop flashing and remain a steady green. The units are now ready to
use.
Switch the Baby unit off
1. Press and hold the button on the Baby unit. The green Link indicator will
switch off.
Switch the Parent unit off
1. Press and hold the button on the Parent unit until an audible alert sounds.
The green Link indicator will switch off and the display will go blank.

19
Baby sound level LED indicators
4HESEVEN,%$SACROSSTHETOPOFTHE0ARENTUNITLIGHTUPTOINDICATETHELEVEL
OFSOUNDBEINGRECEIVEDFROMTHE"ABYUNIT4HE,%$SLIGHTUPPROGRESSIVELYAS
the sound increases.
LEDs 1-2LIGHTUP'REENOR!MBERIF-UTE,OWISONSEEPAGEWHEN
SOUNDSOFD"ANDD"ARERECEIVED
LEDs 3-4LIGHTUP'REENWHENSOUNDSOFD"ANDD"ARERECEIVED
LEDs 5-7LIGHTUP2EDWHENSOUNDSOFD"D"ORD"ARERECEIVED
Equivalent sound level examples:
D"D"NORMALCONVERSATION
D"LOUDCONVERSATION
D"D"LOUDTRAFlCNOISE
LEDs 1-2 = Green
(or Amber if
Mute Low is on)
LEDs 3-4 = Green LEDs 5-7 = Red
USING YOUR DIGITAL BABY MONITOR

20
Adjust the loudspeaker volume
At the Parent unit:
1. Press or TOSELECTTHEREQUIREDLEVEL4HElRSTPRESSWILLSHOWTHE
CURRENTSETTING4HEREAREVOLUMELEVELSANDOFF-UTE4HEVOLUMELEVELWILL
BESHOWNONTHEDISPLAYATEACHPRESSEG,EVELISSHOWNASVolume .
)FYOUWISHTOSWITCHTHEVOLUMEOFFKEEPPRESSING until the display shows
Volume Off. The Mute All indicator will illuminate.
At the Baby unit:
 4HEREAREVOLUMESETTINGS
1. When Music is being played or Talk back is in progress from the Parent unit,
press the or BUTTONTOADJUSTTHEVOLUME
2. If no music or Talk back is in use, pressing the or BUTTONSWILLADJUSTTHE
VOLUMEANDABEEPWILLSOUNDATTHEAPPROPRIATEVOLUMELEVELSET
)FYOUTRYANDSETTHEVOLUMEHIGHERORLOWERTHANTHESETTINGSAVAILABLEONEITHERUNITYOUWILLHEARAN
error tone.
Setting the Parent unit to Volume OffISTHEEQUIVALENTOFSWITCHINGTHE-UTE!LLFEATUREON3EEPAGE
21 for more information on Mute All.
4HEDEFAULTLOUDSPEAKERVOLUMEONBOTHUNITSIS,EVEL
USING YOUR DIGITAL BABY MONITOR