Original BTC Alma US-FF701N User manual

Alma
Instruction Manual
Floor Light
MADE IN BRITAIN
ORIGINALBTC.COM
[phone]
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND E178274
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes. All products are hand-assembled in Oxfordshire from high quality
components, produced in the UK.
US-FF701N/R/G
v1.6-10.22
LAMP GUIDANCE
TYPE* WATTAGE** BASE SHAPE
Safety & Installation Instructions
- Ensure the lamp type and max wattage is followed - do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp (bulb) or lampholder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Cleaning and Maintenance
All brass components can be cleaned with a metal polish to remove tarnishing with the exception of
the flexible arm. Do not use polishes or abrasives on the flexible arm as this may compromise
the fittings ability to maintain its shade position. Bone china can be cleaned by hand, with a soft
damp cloth with a diluted, mild detergent (nonabrasive) if necessary. Switch off power to the fitting
before cleaning.
ENG WARNING – RISK OF FIRE AND ELECTRIC SHOCK.
SUITABLE FOR DRY LOCATIONS ONLY
FR ATTENTION – RISQUE D’INCENDIE, RISQUE DE CHOC.
POUR EMPLACEMENTS SECS SEULEMENT

Alma Floor Light
US-FF701N
US-FF701R
US-FF701G
Alma Floor Light Natural
Alma Floor Light Coral
Alma Floor Light Seaweed
120V AC 60Hz DRY Assembly Diagrams
* Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used. 2700K lamps recommended.
AE26
LAMP GUIDANCE : NB Lamp Not Included
TYPE WATTAGE* BASE SHAPE
Contents
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU ASSEMBLE & USE YOUR LIGHT
STEP 1
STEP 2 STEP 3 (OPTIONAL)
Remove the plastic sheathing which protects the end of the stem.
Do not remove the plastic sheathing which protects the cable.
Screw the balls onto the threaded stems. Screw the stem on to the
base. It is better to do this horizontally (i.e. on its side) to allow the
cable to rotate freely. Note that the fitting is very heavy, so it may
be helpful to ask a second person to assist in this task. Take care
not to damage the paintwork.
REMOVE
DO NOT
REMOVE
Assemble the shades as shown below: The floor balls can be adjusted to ensure the product
remains level on uneven surfaces, as shown below:
LED* 6W (recommended)
Incandescent 40W Max
2
1a
3
4
4
4
5
1b
1c
6
21a
1b
1c
4
3
5
6
Contents
1
1a
1b
1c
2
3
4
5
6
Main body
Lampholder
Stem
Base
Shade (x2)
Plastic shade ring (x2)
Brass shade ring (x6)
Brass shade disc (x2)
Brass ball feet (x4)
LAMP NOT INCLUDED NOTE: Black gasket