Original BTC Cecil FT554 User manual

Cecil
Instruction Manual
Table Light
MADE IN BRITAIN
ORIGINALBTC.COM
[phone]
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxford from high quality components, produced in the UK.

Cecil Table Light
FT554 Cecil Stem Table Light
FT555 Cecil Cone Table Light
230V ac 50Hz IP20
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
Safety Instructions
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, some parts will become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Glass
and bone china can be cleaned by hand, using a soft damp cloth with a diluted mild detergent
(nonabrasive) if necessary. Switch off power to the fitting before cleaning.
1. Unscrew the three thumb screws from
the shade gimbal
2. Secure the shade bracket to the
lampholder using the shade ring
3. Insert bulb
4. Attach the shade using the three thumb
screws, carefully locating them into the
three holes in the shade bracket
Thumb screws
Using Original BTC’s trademark of blending the finest materials, the Cecil Table Lights exude quality
and simple sophistication. Choose between a narrow or cone shaped wooden stem, in a range of
beautiful wooden finishes-cherry, walnut or oak.
E27 GLS BALL
LAMP GUIDANCE
TYPE* WATTAGE** BASE SHAPE
ü
ü
ü
ü
INCANDESCENT
CFL
ECO-HALOGEN
LED
60W MAX
13W
42W
9W
Bone china shade installation / lamp change
Shade
Bulb
Shade bracket
Shade ring
Lampholder