Original BTC Chester FT580 User manual

Instruction Manual
Chester Table & Floor Light
MADE IN BRITAIN
ORIGINALBTC.COM
[phone]
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxford from high quality components, produced in the UK.
FT580 / FF581
v1.2-02.19

Chester Table & Floor Light
FT580 Chester Table Light
FF581 Chester Floor Light
230V ac 50Hz Adjusting Fitting IP20
Safety Instructions
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, electric shock or
injury. Please retain for future reference. When fitting is in operation, some parts will become hot;
take care when using/handling.
- Ensure the lamp type and max wattage is followed - do not exceed. Take care not to overtighten
lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Metal finishes should only be cleaned with a soft, dry cloth. Switch off power to the fitting before
cleaning.
A contemporary and clean lined design; perfectly suited for illuminating desk, table tops and reading
nooks alike.
The Chester has a striking satin copper or brass shade and machined stainless steel detail and base.
(a) Loosen the clamp before
tilting or twisting the lamp
head, or sliding it up or down
the stem.
Switches operate individual
lamp heads.
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
(a) FF581
(b) FT580
E27 GLS BALL
LAMP GUIDANCE
TYPE* WATTAGE** BASE SHAPE


Χ

INCANDESCENT
CFL
ECO-HALOGEN
LED
2 x 40W MAX (a)
2 x 13W
N/A
2 x 10W
40W MAX (b)
13W
N/A
10W
(a)