Orion VGA SERIES User manual

Installation and User’s Guide
http://www.orionimages.com
All contents of this document may change without prior notice, and actual product appearance may differ
from that depicted herein
Installation and User’s Guide
TFT-LCD MONITOR
(SECURITY)
VGA SERIES LCD MONITOR

2
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg2
* Follow this safety instruction to use the monitor properly and prevent the damages.
* Keep this user’s guide book for later use.
Warning Statements
* This safety instruction has “ Warning” and “ Caution” as below.
WARNING: If the user does not follow this instruction,
it may cause the serious damage to the user.
CAUTION: If the user does not follow this instruction, it may cause the slight
damage to the user or cause some damages to the monitor.
Never remove the back over and touch
the inside of the monitor. If you need a
service, please contact the service center.
Keep away the monitor from the
direct sunlight and a heating appliance.
Never push objects of any kind into this
product as they may result in a risk of fire
or electric shock.
Connect the power code to the wall
outlet tightly. If the power code or plug are
defective and the wall outlet is not tight,
p
lease do not use them.

3
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg3
Warning Statements
Do not install this monitor on the outside
and near water. If may cause damage to
the product, electric shock and fire.
For cleaning do not use liquid cleaners.
Never touch the power plug with wet-
hands.
When lightning and thundering, unplug
the monitor from the wall outlet and never
touch it.
Unplug this product from the wall outlet,
when It does not operate for a long time.
When smoking and noising from the
monitor, unplug the product from the wall
outlet and contact a service center.
How to fix
1. Do not open this product as it contains high voltage inside.
2. It may create an electric shock.
3. It the user disassembles and remove the back cover, it does not make sure
4. To make up for the damages and do a service and exchange the monitor..

4
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg4
Cautions
Install this monitor some distance
From the wall and do not install unless
Proper ventilation is provided.
Place this product on a stable place.
If not, it may fall, causing serious
Damages to the monitor and people.
The openings must not be blocked by
curtain, rug or other similar surface. When carrying this monitor, be careful
not to damage the panel and drop it
It may cause some trouble.
Before carrying the monitor, tum it off
and Unplug the signal cables and the
power code From the wall outlet.
Take the power plug out from the wall
outlet. Do not pull the cable. It may
snap the inner wires and cause
overheating and fire.
Install this monitor about 50cm far from
the eyes and an angle of 0~15 degrees
below eyes. Too close installation may
cause having weak sight.
Do not press the LCD panel with hands
or the sharpened material hardly.
For cleaning, unplug the monitor from
the Wall outlet. Do net use the liquid
cloth. Use the soft cloth.
Do not use the chemical liquid for
cleaning. It may cause fading and
breakage.

5
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg5
TABLE OF CONTENTS
1. INSTALLATION .................................................................................................................
1.1 Parts ……....................................................................................................................
2. FEATURES …..................................................................................................................
2.1 Display Mode …….……..............................................................................................
3. OSD SETTING
..
....
.
.......................................................
.............
....
..................................
3.1 OSD Menu
....
.
.
............
...........................
.................
..................................
.................
5. TROUBLESHOOTING
..
....
.
.....................................
..................
.................
.....
...............
.
..
....
.
.......................................................
.................
...................
......
....
6. LIMITED LIFETIME WARRANTY
..
....
.
.......................................................
.................
....
4. INFORMATION TO THE USER
..
....
.
.......................................................
................
.........
6
6
7
7
8
9-10
12
13
11

6
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg6
INSTALLATION
1.1 P
a
r
ts

7
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg7
FEATURES
2.1 Display Mode
2.2 Specifications

8
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg8
OSD
(
On Screen Dis
p
la
y)
SETTING
3.1 OSD Menu
Brightness: Adjust brightness
Contrast: Adjust contrast
H-Position: Adjust horizontal position of screen
V-Position: Adjust vertical position of screen
Phase: Adjust the phase
Clock: Adjust the frequency of screen
Auto Adjust: Adjust the screen automatically
COLOR TEMP: Adjust color temperature
RED: Adjust red color
GREEN: Adjust green color
BLUE: Adjust blue color
AUTO COLOR: Adjust color in detail
OSD H-POSI: Adjust the horizontal position of OSD
OSD V-POSI: Adjust vertical position of OSD
OSD TIMER: Adjust how long the OSD display
TRANSPARENCY: Select OSD menu in transparent

9
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg9
OSD
(
On Screen Dis
p
la
y)
SETTING
Menu / Select: Activates and exits the On Screen Display
Accepts your selection or displays the current mode.
Auto / Exit / Source: Adjust the screen automatically
Exit the on screen display.
Select input source, and move the previous menu.
Adjust menu settings and move the OSD (On Screen Display) menu.
Adjust menu settings and move the OSD (On Screen Display) menu.
Turns the power ON or OFF. There will be a few seconds delay before the display
appears. The power LED(next to the power switch) lights with green when the power is
turned ON. The power is turned off by pressing the power switch again and the power
LED goes Red.
3.1 OSD Menu
LANGUAGE: Adjust the language of OSD
RECALL: Adjust mode recall
INPUT SELECT: Adjust the input select

10
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg10
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one more
of the following measures:
The manufacturer is not responsible for any Radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate
the equipment."
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
zConsult the dealer or an experienced radio / TV technician for help.
WARNING: