Orion PREMIUM SERIES User manual

Installation and User’s Guide
http://www.orionimages.com
All contents of this document may change without prior notice, and actual product appearance may differ
from that depicted herein
Installation and User’s Guide
15” TFT-LCD MONITOR
(SECURITY)
PREMIUM SERIES LCD MONITOR

2
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg2
* Follow this safety instruction to use the monitor properly and prevent the damages.
* Keep this user’s guide book for later use.
Warning Statements
* This safety instruction has “ Warning” and “ Caution” as below.
WARNING: If the user does not follow this instruction,
it may cause the serious damage to the user.
CAUTION: If the user does not follow this instruction, it may cause the slight
damage to the user or cause some damages to the monitor.
Never remove the back over and touch
the inside of the monitor. If you need a
service, please contact the service center.
Keep away the monitor from the
direct sunlight and a heating appliance.
Never push objects of any kind into this
product as they may result in a risk of fire
or electric shock.
Connect the power code to the wall
outlet tightly. If the power code or plug are
defective and the wall outlet is not tight,
p
lease do not use them.

3
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg3
Warning Statements
Do not install this monitor on the outside
and near water. If may cause damage to
the product, electric shock and fire.
For cleaning do not use liquid cleaners.
Never touch the power plug with wet-
hands.
When lightning and thundering, unplug
the monitor from the wall outlet and never
touch it.
Unplug this product from the wall outlet,
when It does not operate for a long time.
When smoking and noising from the
monitor, unplug the product from the wall
outlet and contact a service center.
How to fix
1. Do not open this product as it contains high voltage inside.
2. It may create an electric shock.
3. It the user disassembles and remove the back cover, it does not make sure
4. To make up for the damages and do a service and exchange the monitor..

4
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg4
Cautions
Install this monitor some distance
From the wall and do not install unless
Proper ventilation is provided.
Place this product on a stable place.
If not, it may fall, causing serious
Damages to the monitor and people.
The openings must not be blocked by
curtain, rug or other similar surface. When carrying this monitor, be careful
not to damage the panel and drop it
It may cause some trouble.
Before carrying the monitor, tum it off
and Unplug the signal cables and the
power code From the wall outlet.
Take the power plug out from the wall
outlet. Do not pull the cable. It may
snap the inner wires and cause
overheating and fire.
Install this monitor about 50cm far from
the eyes and an angle of 0~15 degrees
below eyes. Too close installation may
cause having weak sight.
Do not press the LCD panel with hands
or the sharpened material hardly.
For cleaning, unplug the monitor from
the Wall outlet. Do net use the liquid
cloth. Use the soft cloth.
Do not use the chemical liquid for
cleaning. It may cause fading and
breakage.

5
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg5
TABLE OF CONTENTS
1. INSTALLATION .................................................................................................................
1.1 Parts ……....................................................................................................................
2. FEATURES …..................................................................................................................
2.1 Specifications …….……..............................................................................................
3. OSD SETTING ............................................................................................................
7. TROUBLESHOOTING
..
....
.
.......................................................
....
.............
....................
8. LIMITED LIFETIME WARRANTY
..
....
.
.......................................................
.................
...
4. CONTROL BUTTON
..
....
.
.......................................................
................
.........................
1.2 Connection …..…..........................................................................................................
6. INFORMATION TO THE USER
..
....
.
.......................................................
................
.........
5. APPENDIX
..
....
.
.......................................................
................
........................................
5.1 D-SUB Connector PIN Assignment …….……............................................................
6
6
8
8
9-12
16
17
13
7
15
14
14

6
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg6
INSTALLATION
1.1 P
a
r
ts
Remove the package cover and place the product on a flat and secure surface or in the
installation location. Check whether all the following device and accessories are included with
the main system.

7
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg7
INSTALLATION
1. DC 12V IN
2. RGB IN
3. VIDEO1 IN
4. VIDEO1 OUT
5. VIDEO2 IN
6. VIDEO2 OUT
7. S-VIDEO (Y/C) IN
8. S-VIDEO (Y/C) OUT
9. PC STEREO IN
10. TRIGGER IN\
RGB signal input
Composite signal input for VIDEO1
Video looping output for VIDEO1
Composite signal input for VIDEO2
Video looping output for VIDEO2
Y/C separated signal input
Y/C separated signal looping output
Y/C separated signal input
NO / NC signal input
1.2 Connection

8
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg8
FEATURES
VIDEO
Screen Size 15”
Pixel Type Active Matrix TFT
Max. Resolution 1024 x 768 @ 60Hz (XGA)
Pixel Pitch 0.297 x 0.297mm
Brightness 250 cd/㎡
Contrast Ratio 450 : 1
Aspect Ratio 4:3
Viewing Angle (H/V) 130 / 110
Display Color 16.2 Million
Response Time < 12ms
Video System NTSC / PAL
Frequency (H) 31 ~ 48KHz
Frequency (V) 55 ~ 75Hz
Panel Lamp Life 50,000hours
MECHANICAL
Packing Dimension
W x H x D 20.0 x 16.1 x 6.5
Weight 12.1lbs
Power Consumption 35W
Power Source DC12V adapter (Auto Switching) / 3A
2.1 Specifications (15 Inch)
NOTE : Technical specifications are subject to change without notice..

9
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg9
OSD (On Screen Display) SETTING
A. Input Select
B. Picture Menu
1. Press the SOURCE button and then ▲/▼ button to move
the source.
2. Press the ▶ button to select the source.
3. Press the MENU/EXIT button to exit the INPUT menu.
3.1 OSD MENU Description
MENU SELECTION
1. Press the MENU key to access the Main menu.
2. Use the and arrow key to highlight a selection
3. Press the OK or button to select an item.
4. Use the and arrow key to highlight a selection.
5. Use the and arrow key to adjust the setting on a selected item.
NOTE : If you don’t connect RGB port, RGB SETUP menu is not select.
Inputs can be set to VIDEO1, VIDEO2, S-VIDEO and RGB mode.

10
Installation and User’s Guide
htt
p
://www.orionima
g
es.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: [phone] / Fax: [phone] pg10
OSD (On Screen Display) SETTING
C. Sound Menu
1. Press the MENU/EXIT key and then ▼/◀ or ▲/▶ key to select the PICTURE menu.
2. Press the OK or ▶ button and then ▲/▶ button to select the adjustment item you need.
3. Press the OK or ▶ button to active the item.
4. Press the MENU/EXIT button to move the previous menu..
EX) If you select the BRIGHTNESS, then the picture below appears on the screen.
NOTE : TINT item is for the NTSC input only.
1. Press the MENU button and then ▲/▼ button to select the SOUND menu.
2. Press the ▶ button and then ▲/▼ button to select the adjustment item you need.
3. Press the ▶ button to active the item.
EX) If you select the TREBLE, then the picture below appears on the screen.
4. Press the MENU button to move to the previous menu..